Cationic Etherifying Agent (Quat 188 Cta 69%) Suppliers and Manufacturers

Guar Gum Types Food, Feed & Pharma Grades - Various particle sizes (very coarse to very fine). - • Various hydration rates (very slow to very fast). - • Various viscosities (1% solution in water = 50 cps to 7000 cps). - • Special deodourised grades. - • Special low microbiological count grades. Technical Grades Straight Guars: - Various particle sizes (very coarse to very fine). - Various hydration rates (very slow to very fast). - Various viscosities (1% solution in water = 50 cps to 8000 cps). - Special good Dry-Flow (Free-Flow) Guars. - Special Anti-Dusted Guars. Modified Guars and Guar Derivatives: - Fast hydrating / High Viscosity / Diesel Slurriable (particularly suitable for oil, gas and other deep well drilling and EOR operations like polymer flooding / fracturing), - Borated. - Reticulated. - Oxidised. - Depolymerised. - High water absorbance capacity. - Carboxymethyl (Anionic). - Hydroxypropyl (Nonionic). - Hydroxypropyltrimethyl chloride (Cationic). - Hydroxypropyltrimethyl chloride Hydroxypropyl (Cationic, double derivative). - Special good Dry-Flow (Free-Flow) Modified Guars / Guar Derivatives. - Special Anti-Dusted Modified Guars / Guar Derivatives. Guar gum is a fiber from the seed of the guar plant. Guar gum is used as a laxative. It is also used for treating diarrhea, irritable bowel syndrome (IBS), obesity, and diabetes; for reducing cholesterol; and for preventing “hardening of the arteries” (atherosclerosis). In foods and beverages, guar gum is used as a thickening, stabilizing, suspending, and binding agent. In manufacturing, guar gum is used as a binding agent in tablets, and as a thickening agent in lotions and creams. How does it work? Guar gum is a fiber that normalizes the moisture content of the stool, absorbing excess liquid in diarrhea, and softening the stool in constipation. It also might help decrease the amount of cholesterol and glucose that is absorbed in the stomach and intestines. There is some interest in using guar gum for weight loss because it expands in the intestine, causing a sense of fullness. This may decrease appetite. USES: Diarrhea. Adding guar gum to the tube feeding formula given to critical care patients may shorten episodes of diarrhea from about 30 days to about 8 days. High cholesterol. Taking guar gum seems to lower cholesterol levels in people with high cholesterol. Guar gum and pectin, taken with small amounts of insoluble fiber, also lower total and “bad” low-density lipoprotein (LDL) cholesterol, but don't affect “good” high-density lipoprotein (HDL) cholesterol or other blood fats called triglycerides. Diabetes. Taking guar gum with meals seems to lower blood sugar after meals in people with diabetes. By slowing stomach emptying, guar gum may also lessen after-meal drops in blood pressure that occur frequently in people with diabetes. Constipation. Irritable bowel syndrome (IBS).

The specific density (AT 20c): 0,918 - 0,920. The refractive index (AT 40c): 1.467 - 1.469. Transparency of oil, max: 10 fem. Acidity mg KOH % gm oil max: 0,1 - 0,6. Peroxide value mMol/kg oil max: 0,1 - 0,7. Color value iodine, mg max: 4. Iodine value (WIJS): 110 - 144. Moisture & Volatile % max: 0,06. The saponification value, mg KOH/gm oil: 188 - 194. Phosphorus containing matter (P2O5): Negative. Non-fatty Impurities, % max: Negative. Coloring materials, allowed to ad: According to the international standards artificial flavors, allowed to ad: According to the international standard. Antioxidants: 200mg/kg but galate not more than 100mg/kg. Preservative agent: According to the international standards. Anti foaming: 10mg/kg. Anti crystallization: 1250mg/kg. Soap content: 0,005 max. Unsoluble impurities % mass: 0,5 max.

The specific density (AT 20c): 0,918 - 0,920. The refractive index (AT 40c): 1.467 - 1.469. Transparency of oil, max: 10 fem. Acidity mg KOH % gm oil max: 0,1 - 0,6. Peroxide value mMol/kg oil max: 0,1 - 0,7. Color value iodine, mg max: 4. Iodine value (WIJS): 110 - 144. Moisture & Volatile % max: 0,06. The saponification value, mg KOH/gm oil: 188 - 194. Phosphorus containing matter (P2O5): Negative. Non-fatty Impurities, % max: Negative. Coloring materials, allowed to ad: According to the international standards artificial flavors, allowed to ad: According to the international standard. Antioxidants: 200mg/kg but galate not more than 100mg/kg. Preservative agent: According to the international standards. Anti foaming: 10mg/kg. Anti crystallization: 1250mg/kg. Soap content: 0,005 max. Unsoluble impurities % mass: 0,5 max.

Since SIZEOMNI 40S is cationic can be used in combination with weakly cationic auxiliaries. For adding SIZEOMNI 40S, the pH of solution should be 4. For enhance the SIZEOMNI 40S performance, cationic fixing agent should be required. Application of SIZEOMNI 40S in the size press changes the wet ability of the paper and reduces its water absorption. The presence of aluminium ions in the base paper is not necessary for obtaining optimum results. Since SIZEOMNI 40S is cationic, it cannot be applied in the size press with fluorescent whiteners and normal dyes or basic dyes. Only cationic dyes can be added in the solution. The normal drying temperatures on the paper machine are sufficient to develop full sizing. No additional curing period is required. SIZEOMNI 40S has good stability in the presence of large quantities of electrolytes. SIZEOMNI 40S can be added batch-wise to the starch solution storage tank as well as continuously in the operating tank or the feeding pipe to the size press. SIZEOMNI 40S is low foaming, so defoamers are normally not required.

Categories Acidulents Qty in 20' FCL 20000kg Min Order 1000kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC E No. E334 CAS No. 87-69-4 HS Code 291813 Specification FCC/USP L-Tartaric Acid, E334, CAS no.87-69-4, food acidulent, Chemical Formula C4H6O6. The manufacturing process via chemical synthesis. Tartaric acid is used as an acidifying agent in candy, jams and jellies to give these products a sour or tart taste. As an experienced L-Tartaric Acid manufacturer and supplier, we has been supplying and exporting Betaine Monohydrate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.

Good Price 30% LDAO Lauryl Dimethyl Amine Oxide CAS 1643-20-5 Product details Chemical Name: Lauryl dimethyl amine oxide Code: LDAO 30% Other Name: N,N-dimethyldodecylamine-N-oxid CAS NO.: 1643-20-5 Formula: C14H31NO Purity : 30% LDAO at room temperature is a colorless or yellowish transparent liquid, is a special type of surfactant, it becomes cationic in acidic medium, and in neutral or alkaline medium is non-ionic. In addition to own the general surface active agent properties, but also has excellent solubilization, thickening, emulsification, foaming, stable foam, soft, moisturizing, antistatic, good compatibility with human skin, the slightly physiological toxicity, easy to biodegradation.And it has certain bactericidal properties and mildew - proof effect Product properties 1. Excellent antistatic, softening, foam-stabilizing performance. 2. Mild to skin. Make cloth soft and smooth, make hair soft, easy to comb, glossy and shiny. 3. Bleach stable. Good ability of thickening and solubilizing to keep product stable. 4. Good ability of sterilizing and dispersing calcium soap, good biodegradability. 5. Be compatible with anioncic, cationic, amphoteric and nonionic surfactants. 6. Especially suitable for shampoos, bath washes, dish washing detergents Application Lauryl Dimethyl Amine Oxide used as detergent, emulsifier, wetting agent, foaming agent, softener, milling agent and dyeing auxiliary. Also can be used as sterilizing agent and antistatic agent, as a coagulant during metal plating, as an initiating agent or inhibiting agent in polymerization, as an emulsifying agent or moisturizing agent in cosmetics; otherwise, it can be used as an antirust agent for metal. Packing & Storage Packing: Package: 200kg/drum, 80 drums * 20FCL 1000kg/IBC, 20 IBCs * 20FCL Storage: Kept in dry, cool, and shaded place with original packaging, avoid moisture. Ambient temperature is10-50, the container to be sealed. It is not advisable to use containers of copper material. Recommended storage in plastic containers; a shelf life of two years. Specification Product Lauryl Dimethyl Amine Oxide(LDAO 30%) CAS# 1643-20-5 Batch No 220310-10 Quantity: 28000KG Date of manufacturing Mar. 10th, 2022 Date of expire Mar. 9th, 2023 Iteam Specification Results Appearance Light yellow clean liquid Confirms Active matter % 29 ~ 32 30.1 Free amine (%) 0.70 0.26 Free peroxide (%) 0.50 0.08 Color (APHA) 100 42 PH value ( 10% solu,25 6.0 ~ 8.0 7.5 Conclusion Qualified

Dolomite is a mineral that is usually found in dolostone deposits, which are sedimentary rocks. Its applications are driven by the intrinsic distinctions between dolomite and calcite It is a versatile mineral that is used across several industries such as construction, agriculture, ceramics, pharmaceuticals, paints, plastics, rubber and refractories to mention a few. The physical properties of dolomite are its soft to medium hardness with a value of 3 and 4 on the Mohs scale and the pearly luster. Dolomite is used as a source of magnesium in ceramic, glass, cement and pharmaceutical sectors. In the Iron and steel industries, dolomite is massively used because of its strength and compatibility in purifying iron and steel. For construction and building materials, it is used as a substitute for lime. Sodium triphosphate (STP), also sodium tripolyphosphate (STPP), or tripolyphosphate (TPP), is an inorganic compound with formula Na5P3O10. The burnt dolomite is used in refractories, as a sintering agent in the palletization of iron ore and as a flux agent in the production of steel. Paints, plastics, rubber, soaps, and detergents sectors use it as filler in their manufacturing processes. Farmers use dolomite to adjust the pH of their crops. It is also used in the chemical industry to make magnesium salts such as magnesia and magnesium oxide (MgO), which is further utilised in pharmaceuticals. The distinguishing characteristics of our natural dolomite are: High purity grade along with whiteness. Our Dolomite has high compressive and shear strength. It also has the wet ability and fire-resistant. The strength of our mineral dolomite is its long life and rigidity. The structure of dolomite is like that of calcite, except every other cation layer contains magnesium ions instead of calcium ions. But, if we compare dolomite to calcite, its usage will be less prevalent within the industries. This is because of the lack of brightness in the dolomite mineral. We provide cutting-edge and high grade dolomite minerals that can be used in a variety of applications. In order to meet all diverse demands, we can add additional refining operations to our standard dolomite mineral production to suit the bespoke requirements of various sectors and industries.

Citrus & Apple Pectin powder, E440, CAS no.9000-69-5, Pectin is used as a gelling agent in a wide range of fruit-based products, such as jams, marmalades, jellies, fruit preparations for yoghurts and desserts and fruit filling for bakery products. Pectin is used in confectionery jellies to give a good gel structure and a clean bite. The typical dosage of pectin in food applications is between 0.5 â?? 1.0%. As an experienced Citrus & Apple Pectin manufacturer and supplier, we has been supplying and exporting High methoxyl pectin, DE (Degree of methyl Esterification ) higher than 50 and low methoxyl pectin pectin, DE lower than 50 food grade. for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. High methoxyl pectin/Low methoxyl pectin Specification Degree of esterification >50 or 65 % pH of 1% solution 2.8-3.3 Loss on drying, %

Dadmac (Quaternary Ammonium Monomer) DADMAC is a high purity, aggregated, quaternary ammonium salt and high charge density cationic monomer. Its appearance is colorless and transparent liquid without an irritating smell. DADMAC can be dissolved in water very easily. There is alkenyl double bond in the molecular structure and can form linear homopolymer and all kinds of copolymers by various polymerization reaction. The features of DADMAC are: very stable in normal temperature, unhydrolyzed and noninflammable, low irritation to skins and low toxicity. Use: It can be used as cationic monomer to produce mono-polymer or co-polymers with other monomers. The polymers can be used as formaldehyde-free color-fixing agent in the textile dyeing and finishing auxiliaries, film forming on the fabric and improve the color fastness; In paper-making additives can be used as retention agent, paper coating anti-static agent, AKD sizing promoter; Can be used in decoloring flocculation in the process of water treatment and purification with high efficiency and non-toxic;In daily chemicals, can be used as shampoo combing agent, wetting agent and the anti-static agent; In oilfield chemicals can be used as clay stabilizer, cationic additive in acid and fracturing fluid and so on. Its main role is electric neutralization, adsorption, flocculation, cleaning, decoloring, especially assynthetic resin modifier for conductivity and anti-static property. Applications: Water Treatment Paper Textile & Dyeing Oil drilling Mining CodeItem AMZCD101 AMZCD102 AMZCD103 Appearance Clear transparent liquid Solid Content 601 615 651 pH 5070 ColorAPHA 50 NaCI 20

REFINED SUNFLOWER OIL Specific density (AT 20c): 0,918 - 0,920 Refractive index (AT 40c): 1.467 -1.469 Transparency of oil, max: 10 fem Acidity mg KOH % gm oil max: 0,1 - 0,6 Peroxide value mMol/kg oil max: 0,1 -0,7 Color value iodine, mg max: 4 Iodine value (WIJS): 110 - 144 Moisture & Volatile % max: 0,06 Saponification value, mg KOH/gm oil: 188 - 194 Phosphorus containing matter (P205): Negative Non-fatty Impurities, % max: Negative Coloring materials, allowed to ad: According to the international standard Artificial flavors, allowed to ad: According to the international standards Anti oxidants: 200mg/kg but galate not more than lOOmg/kg Preservative agent: According to the international standards Anti foaming: lOmg/kg Anti crystallization: 1250mg/kg Soap content: 0,005 max Unsoluble impurities % mass: 0,5 max

Potassium formate is a chemical compound with the formula HCOOK, consisting of potassium cations and formate anions. It is a versatile chemical primarily used in drilling fluids for the oil and gas industry, where it serves as a high-density brine to control wellbore pressure, prevent blowouts, and enhance drilling efficiency. Potassium formate brine is an environmentally friendly alternative to traditional oil-based drilling fluids. It also finds applications in de-icing solutions for runways and highways due to its low environmental impact. In addition, potassium formate is used as a reducing agent in various chemical processes and as a corrosion inhibitor in some industries. Its multifaceted utility, particularly in drilling operations and de-icing, highlights its significance in promoting safety and efficiency while minimizing environmental concerns.

Refined Sunflower Oil Specification* Actual Value Color Number, Mg Iodine 1-10 1-4 Acid Value, Mg 0.60 0.10 Peroxide Value, O Millimole/Kg 10 0.5 Moisture And Volatile Matter, % 0.10 0.03 Mass Content Of Phosphoric Matters, % 1 0.15 Clarity Level 15 2 Extraction Oil Flash Point, C 234 235 Fatless Admixtures, % None None Mass Content Of Phosphoric Matters, % None None Soap, % None None Non-GMO REFINED SUNFLOWER OIL Specific density (AT 20c): 0,918 - 0,920 Refractive index (AT 40c): 1.467 -1.469 Transparency of oil, max: 10 fem Acidity mg KOH % gm oil max: 0,1 - 0,6 Peroxide value mMol/kg oil max: 0,1 -0,7 Color value iodine, mg max: 4 Iodine value (WIJS): 110 - 144 Moisture & Volatile % max: 0,06 Saponification value, mg KOH/gm oil: 188 - 194 Phosphorus containing matter (P205): Negative Non-fatty Impurities, % max: Negative Coloring materials, allowed to ad: According to the international standard Artificial flavors, allowed to ad: According to the international standards Anti oxidants: 200mg/kg but galate not more than lOOmg/kg Preservative agent: According to the international standards Anti foaming: lOmg/kg Anti crystallization: 1250mg/kg Soap content: 0,005 max Unsoluble impurities % mass: 0,5 max

Sodium Hydroxide Solution is used in many industries, mostly as a strong chemical base in the manufacture of pulp and paper, textiles, drinking water, soaps and detergents and as a drain cleaner. Appearance: A clear colorless liquid free from foreign matter Relative Density at 40�°C: 1.506 % Sodium Hydroxide [as NaOH]: 48.80% Sodium Hydroxide (On Dry Basis) [as NaOH] : 99.80% Sodium Carbonate [as Na2CO3]: 0.084% Chlorides [as Cl] : 0.004% Sulphate [as SO4] : 0.005% Silicates [as SiO2] : 0.003 % Copper as [as Cu]: 0.08 ppm Manganese [as Mn]: 0.06 ppm Iron [as Fe]: 4.02 ppm Matter insoluble in water: 0.010ppm

Sodium Hydroxide Flakes is used in many industries, mostly as a strong chemical base in the manufacture of pulp and paper, textiles, drinking water, soaps and detergents and as a drain cleaner. Physical Appearance White Flakes, Material shall be free from foreign matter, dirt or other visible impurities Sodium Hydroxide [as NaOH] Min. 99.50 Sodium Carbonate [as Na2CO3] Max. 00.40 Chlorides [as Cl] Max. 00.030 Sulphate [as SO4] Max. 00.030 Silicates [as SiO2] Max. 00.02 Iron [as Fe] Max. 20.00 Copper [as Cu] Max. 02.00 Nickel [as Ni] Max. 02.00 Manganese [as Mn] Max. 01.00 Chlorates & PerChlorate [as NaClO3] Max. 10.00 Matter insoluble in Water. Max. 00.050

Caustic Soda is used in many industries, mostly as a strong chemical base in the manufacture of pulp and paper, textiles, drinking water, soaps and detergents and as a drain cleaner. Physical Appearance White flakes, Material shall be free from foreign matter, dirt or other visible impurities Sodium Hydroxide [as NaOH] Min. 99.50 Sodium Carbonate [as Na2CO3] Max. 00.40 Chlorides [as Cl] Max. 00.030 Sulphate [as SO4] Max. 00.030 Silicates [as SiO2] Max. 00.02 Iron [as Fe] Max. 20.00 Copper [as Cu] Max. 02.00 Nickel [as Ni] Max. 02.00 Manganese [as Mn] Max. 01.00 Chlorates & PerChlorate [as NaClO3] Max. 10.00 Matter insoluble in Water. Max. 00.050

Sodium Hydroxide or Caustic Soda Lye or Solution is used in many industries, mostly as a strong chemical base in the manufacturing of pulp and paper, textiles, drinking water, soaps and detergents and as a drain cleaner. Physical Appearance : A clear colorless liquid, free from foreign matter. Relative Density at 40�°C: 1.485 % min. Sodium Hydroxide [as NaOH] : Min. 48.00 % Sodium Hydroxide (On Dry Basis) [as NaOH] : Min. 99.50% Sodium Carbonate [as Na2CO3]: Max. 00.20% Chlorides [as Cl]: Max. 0.015% Sulphate [as SO4]: Max. 0.015% Silicates [as SiO2] : Max. 00.010% Copper as [as Cu] : Max. 2.00 ppm Manganese [as Mn] : Max. 0.50 ppm Iron [as Fe] : Max 10.00 ppm

We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer and supplier of Whitening Agent Optical Brighteners for pulp and Paper Industry. We all want our papers to be as white as possible, don't we? Well, that's where Whitening Agent BRIGHTOMNI BBU Powder & Liquid come in. We supply Tetra Sulpho and Di Sulpho Optical Brighteners in Liquid and powder form. The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper. We have various Whitening Agent Optical Brighteners Available for Paper application like... Optical Brightening Agent BRIGHTOMNI BBU-L in Liquid form, Optical Brightening Agent BRIGHTOMNI BBU-P in powder form, Optical Brightening Agent BRIGHTOMNI UP Liquid Optical Brightening Agent OBA 24 in powder form Fluorescent whitening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form. Additional Information Physical Appearance : Greenish-Yellow Powder CAS No.: 16470-24-9 EINECS No.: 240-521-2 Specific Gravity / Bulk Density : 0.8-1.0 pH of Liquid or 1% Solution : 8-9 Strength by 100% : 100% Shade/Hue: Bluish white Whiteness/ Brightness : Equal to Std % of Active Substance : 21.95% Absorbance (18mg/l) : 0.217 Moisture Content : 2.40%