1Material:Ductile/grey cast iron ggg50, qt500-7/450-10, fgs500-7, 420-12 2Standard:Iso2531 bs en545 en598 bs4772 din2501, gbt13295 3Application:Water supply project, drainage, sewerage, irrigation , water pipeline 4Certificates:Iso2531:2009, en545:2010, en598 iso9001, iso14001, iso18001. 5Inspection:sgs, bv, third party inspection 6Sample: sample for free, but you should pay for the freight charge for the samples 7Payment:30% tt upon placing order 8 packing methods:Wooden case/pallet with plastic layer, or as per customer's requirement
Cast Iron Pipe Fittings
Material: astm a 126 Dimension: ansi/asme b16.4 Thread: ansi/asme b1.20.1 Size: 1/2 - 4 "
1.Material:cast gray iron 2.Size:range from 1.5" to 8" 3.Colour:red 4.Painting:epoxy painting 5.Application:waste water drainage 6.Feature:easy to install and maintain Wooden cases
1Material:Ductile cast iron ggg50, qt500-7/450-10, fgs500-7, 420-12 2Standard:Iso2531 bs en545 en598 bs4772 din2501, gbt13295 3Application:Water supply project, drainage, sewerage, irrigation , water pipeline 4Certificates:Iso2531:2009, en545:2010, en598 iso9001, iso14001, iso18001. 5Inspection:sgs, bv, third party inspection 6Payment:30% tt upon placing order
Cast iron fittings as per is:1538, is:5521, is:13382, etc, etc..... Any
Dear This is April Wang from Qingdao Valtech Manufacturing Co.,Ltd We are manufacturer producing ductile iron pipe fittings and joints more than 15 years
1material:ductile cast iron ggg50, qt500-7/450-10, fgs500-7, 420-12 2standard:iso2531 bs en545 en598 bs4772 din2501, gbt13295 3application:water supply project, drainage, sewerage, irrigation , water pipeline 4certificates:iso2531:2009, en545:2010, en598 iso9001, iso14001, iso18001. 5inspection:sgs, bv, third party inspection 6payment:30% tt upon placing order.
Pipe fittings confirming to DIN/EN877/ISO6594 Material:Cast Iron with flake graphite Qualilty:GJL-150 according to EN1561 Coating: SML,KML,BML,TML Size:DN40-DN300 The pipe fittings produced by our company have smooth surface, high density, no white, High strength, light weight, reasonable design in structure, beautiful externality used on high buildings and environmental protecting, strength corrosion-resistant coating for fittings
Pipe fittings confirming to DIN/EN877/ISO6594 Material:Cast Iron with flake graphite Qualilty:GJL-150 according to EN1561 Coating: SML,KML,BML,TML Size:DN40-DN300 The pipe fittings produced by our company have smooth surface, high density, no white, High strength, light weight, reasonable design in structure, beautiful externality used on high buildings and environmental protecting, strength corrosion-resistant coating for fittings SML DIN EN877/ISO6594 two-part epoxy resin painting fittings Internal and external painting: two-part epoxy resin painting, with an average dry thickness of 60-150 microns KML DIN EN877/ISO6594 Gray two-part epoxy resin powder coating fittings Internal and external painting: Grey two-part epoxy resin powder coating fittings, with an average dry thickness of 250 microns All pipe fittings are produced according to standard DIN19522/EN 877/ISO6594 and not inflammable and not combustible
Dinsen supplies a comprehensive range of en877 sml drainage cast iron pipe and fittings from dn 40 up to dn 300. Apart from the simple en877 Cast iron fittings such as bends, branches and reductions. Dinsen also supplies special fittings such as single branch, short pipe with door. En877 Sml cast iron pipes are suitable for installation inside or outside buildings. When grey iron pipes was been installed outside the buildings, it will not Get rust with the protection of the coating.
1 Material: Ductile/Grey Cast Iron GGG50, QT500-7/450-10,FGS500-7,420-12 2 Standard: ISO2531 BS EN545 EN598 BS4772 DIN2501,GBT13295 3 Application: Water supply project, drainage, sewerage, Irrigation ,water pipeline 4 Certificates: ISO2531:2009, EN545:2010, EN598 ISO9001, ISO14001,ISO18001.
1 Material: Ductile/Grey Cast Iron GGG50, QT500-7/450-10,FGS500-7,420-12 2 Standard: ISO2531 BS EN545 EN598 BS4772 DIN2501,GBT13295 3 Application: Water supply project, drainage, sewerage, Irrigation ,water pipeline 4 Certificates: ISO2531:2009, EN545:2010, EN598 ISO9001, ISO14001,ISO18001.
We produce the cast iron pipe and fittings according to EN877/19522 standard, pipes are produced by centrifugal casting line, and fitting with sand casting or percolated sand process. They are mainly used in drainpipe. The following benefits: flat and straight, even pipe thickness , high strength and density, high smoothness on the inner and outer surface of the wall, easy installation, easy maintain, long life, helpful to environment, fireproofing and no noise. The coating of pipes are usually: inner epoxy liquid painting, outer with anticorrosive painting.
CAST IRON SOIL FITTINGS STANDARD: ASTM A 888 EN877 CSA B 70 KSD 4307 SIZE: 1 12"-15" 38MM-375MM LENGTH: 10 FEET 3000MM PITCH PAINT AND EPOXY PAINT PACKING: WOODEN PALLET. Packing: Wooden cates or steel crates
Dinsen impex in china and we supply sml en877 iron pipes & fittings. By the way, kindly find our advantages as follows: 1. Complete product range and sizes for pipes & fitting and couplings. 2. Have export in european market for 10 years. 3. Experienced in doing business with big customers. 4. Own one pipe factory and two fitting factories. 5. Quick delivery time for decent orders. 6. Free samples can be provided
Cast iron double flanged pipe Cast iron double flanged pipes as per is:7181, class b In standard length of 2.75mtr or as per customer's specification/reequirement.
1.Material:cast gray iron 2.Colour:red 3.Painting:epoxy painting 4.Application:waste water drainage 5.Standard:en877 6.Feature:easy to install and maintain Wooden cases
The cast iron pipe is 3 meters long, the inside of the pipe is coated with epoxy resin paint, and the outside of the pipe is coated with anti-corrosion paint.
EN545 Ductile iron pipe fittings With epoxy coating From DN40-DN600 Standard Eur patterns
