Bet surface area : m©÷/g) :2390 Moisture : (%) 0.6 Ash : (%) 0.0 Particle size(median:d50): (§) 6.0.
Recovered Carbon Black (rCB) made from tire pyrolysis. Used our rCB as an alternative to prime N330 carbon black in order to reduce your cost of goods and increase your price competitiveness and profitability. Applications: - rubber compounds - tires - black masterbatch - ink - paint
Carbon comb, 8 Inch
Carbon Air Filter. Available to Remove gases, fumes, odors and mists. Three types of tray. Activated rate : 60% Absorption surface area : 96.9 106 m©÷/m
Specification Carbon 97.72%, Ash 2.28%, Bulk Density(Mg/m3) 1.555%, Apparent Porosity(%) 16.53%, Cold Crushing Strength 31.13% Size: 1mm-2mm(W)/ 0.6m-0.7m(D) Origin Made in KOREA
Carbon fiber modification on engine hood,empennage, surrounding surface, car handle, rotary plate, ect,. is the desire of car fans. Car fans are bothered by this problem any more after the carbon fiber vinyl come out as its price is lower and easy to operate Model : K9291, K9292, K9293, K9296, K9297 Material Size : 127cm × 50M Fabric : 0.09mm Glue : 30µ paper : 140g.
[product advantages] 1. Convenient to operate by everyone 2. Double safety device to prevent from electrical accident : current fuse + thermal fuse (bi-metal) 3. Automatic power shutoff system to prevent the electrical accident from overheat or malfunction 4. 3step temperature control (low-mid-hi) to keep the set temperature invariably 5. Low power consumption(80w) and high heating efficiency 6. Using time (timer) : 2hr, 4hr, 6hr, automatic power set 7. Applied of infrared carbon fiber heating device : generation of even, constant and soft heat, emission of 90% infrared ray 8. Available to use with wearing shoes in office or home 9. Place to use : office, home, library, study room, sink, factory production line, etc.) [product specifications] 1. Product type : carbon fiber heating apparatus (low power consumption) 2. Cord length : body - controller : 0.6m / controller - power plug : 1.4m 3. Product size : 316 x 450 x23cm 4. Weight(set) : 1.65kg 5. Safety device : current fuse (3a) / thermal fuse(bi-metal:80c) 6. Surface temp. : hi (60c) / mid (50c) / low (40c) 7. Rating : ac 100v/220v, 60hz, 80w 8. Power consumption/hour : hi (49w) / mid (37w) / low (26w) 9. Composition : heater body, controller and power cord, user's manual, gift box
HYOCHANG INDUSTRY PS resin, PP resin, PE resin Calcium Carbonate Masterbatch(Calpet) for PS, PE, PP We manufactor and supply Calcium Carbonate Masterbatch(Calpet)
[product descriptions] Perfect harmony in space ! Various color design goes with any space and place like office, house (living room and study room), store, camping site, library, etc. No risk of fire or burn ! Infrared warm stove and heater ! Environment friendly heater ! [rolling and unrolling system] Roll up to store or carry or move ! Unroll to install and use ! Convenient slim design ! Easy to carry ! [product advantages] Simple + slim + light + easy + safe + compact ! Energy saving environment friendly electric stove and heater ! Saving the energy 2-3 times more than other general electric heaters. [safe + easy] Artificial intelligence power control program ! Various and secure safety devices (temperature, electric current and detailed electric power control, overload shutoff device) ! Environment friendly heater without any risk of fire or burn ! Temperature heated from wide surface gives mild and warm feeling. Excellent and easy to store and carry it after use as it can be disassembled by three parts (body, heating element, and upper guide) and the heating element can be rolled up. [product specifications] [rs400] Voltage : ac 100v / 220v Power consumption : 500w Heating capacity : appx. 3.3m2 Heating method : infrared radiating heat (emissivity : 91%) Safety device : temp. Sensor, overload shutoff device, location sensor (for export only)
FeMn(HC) 1. FeMn H1 - Mn : 78 ~82 - Si : 1.2max - C : 7.5max - P : 0.4max - S : 0.02max 2. FeMn H2 - Mn : 73 ~ 78 - Si : 1.2max - C : 7.5max - P : 0.4max - S : 0.02max Bulk, 1 ton bag, 50 kg bag, 20 kg bag
1. FeMn M1 - Mn : 80 ~ 85 - Si : 1.5max - C : 1.5max - P : 0.40max - S : 0.02max 2. FeMn M2 - Mn : 75 ~ 80 - Si : 1.5max or 0.5max - C : 2.0max - P : 0.40max - S : 0.02max 3. FeMn M3 - Mn : 80 ~ 85 - Si : 1.5max - C : 1.5max - P : 0.15max - S : 0.02max 4. FeMn M4 - Mn : 78 ~ 80 - Si : 1.5max or 0.5max - C : 1.5max - P : 0.15max - C : 0.02max Bulk, 1ton bag, 50kg bag, 20kg bag
1. FeMn L1 - Mn : 80 ~ 85 - Si : 1.5max or 0.5max - C : 1.0max or 0.5max - P : 0.35max or 0.20max - S : 0.02max 2. FeMn L2 - Mn : 75 ~ 85 - Si : 1.5max or 0.5max - C : 1.0max or 0.5max - P : 0.40max or 0.20max - S : 0.02max 3. ULPC - Mn : 85min - C : 0.2max - P : 0.05max - S : 0.02max Bulk, 1ton bag, 50kg bag, 20kg bag
SiMn (LC) 1. SiMn LC1 - Mn : 55 ~ 60 - Si : 25 ~ 35 - C : 0.5max - P : 0.10max - S : 0.01max 2. SiMn LC2 - Mn : 55 ~ 65 - Si : 28.0min - C : 0.1max - P : 0.1max - S : 0.01max 3. SiMn LC3 - Mn : 55 ~ 65 - Si : 30.0min - C : 0.05max - P : 0.10max - S : 0.01max 4. Others 1 - Mn : 55 ~ 65 - Si : 30.0min - C : 0.10max - P : 0.10max - S : 0.01max 5. Others 2 - Mn : 58min - Si : 18 ~ 23 - C : 1.0max - P : 0.10max - S : 0.01max Bulk, 1ton bag, 50kg bag, 20kg bag
Fiberglass fabrics in order to meet special purpose or to increase some idiosyncrasy, these fabrics can be treated in various ways. With different temperature resistance and special properties, they are applied in a wide range of different work condition and industrial fields.
Product rangeKevlar / Twaron Ballistic Fabric Kevlar / Twaron Ballistic Fabric for making bulletproof jackets, helmets, plates, etc.: product number, BFF-K01 - Specification : 1.20 by 2.42M; 1.60 by 3.20M; or length 100M+ - Area Density : 225g/m2 - Ballistic Layers for NIJ IIIA : 24 - Mini order : 100 sq.m; sample is available and charged. - Capacity : 10 kilo sq.m monthly Kevlar / aramid ballistic fabric is softer and more comfortable than UHMW-PE, but it is weaker on UV resistant, low moisture sensibility and not waterproof. Guarantee Period : the material are in 5 years warranty. Note : the material can be preserved under temperature 300 centigrade.
Chopped Strand Mat Fiberglass Chopped Strand Mats are non-woven fabrics consisting of randomly distributed chopped strands held together with a powder or emulsion binder. Chopped Strand Mat is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. The products are most widely used in hand lay-up process and can also be used in filament winding, Compression molding and continuous laminating processes. The typical end-use applications include various panels, boats, FRP roof shoot, Autonitive parts, bathroom equipment and cooling towers. Product Features 1.Uniform density ensures consistent fiberglass content and mechanical properties of the composites products. 2.Uniform powder distribution ensures good mat integrity, little loose fibers and small roll diameter. 3.Excellent flexibility ensures good moldability with no spring-back at sharp corners. 4.Fast and consistent wet-out speed resins and rapid air release reduce resin consumption, improving manufacturing costs, productivity and mechanical properties of the end products. 5.The composite products have high dry and wet tensile strength and good transparency. General Data Binding type : Powder or Emulsion; Densily : 85-900g/m2; Width : Max.3300mm, Tapes available. Edge : 1 or 2 untrimmed edge available upon request.
Surfacing Tissue Surfacing Tissue mainly used in the surface layers of FRP products. It features even Fiber distribution, soft feel, level and smooth fiber surface, less glue content, quick resin soak and good pattern fitness. It can improve the product surface property on corrosion resistance, compressive strength, seepage resistance, and longer service life. It is also suitable for spraying; pattern pressing and other FRP pattern technology. Packaging Product is manufacture in form of a roll wrap on a paper tube then after packed in a plastic bag and placed with in a cardboard carton. Rolls can be loaded in a container directly or on pallets. Stroge Should be stored in dry, cool, clean and rain-proof area. Recommended temperature range of storage is between 10~30 and relative humidity between 50%~75%.
3-D spacer fabric construction is a newly developed concept . The fabric surfaces are strongly connected to each other bv the vertical pile fibers which are interwoven with the skins . Therefore, lhe 3-D spacer fabric can provide good skin-core debonding resistance, excellent durability and superior integrity. In addition, the interstitial space of the construction can be filled up wilh foams to provide synergistic support with vertical piles. These products have broad application prospects in automobile, Iocomotive, aerospace, marine, windmills, building and other industries. Product Characteristics The 3-D spacer fabric consists of two bi-directional woven fabric surfaces, which are mechanically connected with vertical woven piles. And two S-shaped piles combine to form a pillar, 8-shaped in the warp direction and 1-shaped in the weft direction. The 3-D spacer fabric can be made of glass fiber, carbon fiber or basalt fiber. Also their hybrid fabrics can be produced. The range of the pillar height:3-50 mm, the range of the width:3000 mm. The designs of structure parameters including the areal density, the height and distribution density of the pillars are flexible. The 3-D spacer fabric composites can provide high skin-core debonding resistance and impact resistance and impact resistance, light weight. high stiffness, excellent thermal insulation, acoustic damping, and so on.
You Chang brand Alkali-resistant fiberglass mesh fabric is basis of any heat insulation system.Cracks are prevented because of good chemical corrosion resistance and high warp and weft strength~Distortions insulation system from high impact are minimized because the directions. Application 1. You Chang Alkali-Resistant Fiberglass Mesh is widely used in wall reinforcement,out-side wall heat insulation,roof waterproof,wall corner. 2. It can also reinforce cement,plastic,bitumen,plaster,marble,mosaic etc 3. It is an ideal engineering material in construction
You Chang brand geogrids are composed of fiberglass or polyester yarn coated with Bitmen,PVC,SBR.These products possess the properties of high tensile strength in the warp and weft directions,low elongation,excellent temperature range,and good anti-aging and alkali-resistance. Compared to traditional use of fiberglass geogrids can reduce construction costs,extend road service life,and prevent deflection cracks.They can also be used to reinforce roadbeds in soft soil for railways,and water dams. Geogrids woven by Dornier Weaving machines,coated with PVC. Application 1. Roadbed reinforcement of road and railway,crack prevention,increase of roadbed strengthinsulation,roof waterproof,wall corner. 2. Reinforcement and stabilization of riverside,embankment and side slope 3. Reinforcement roadbed in soft soil for railways and water dams. 4. Reinforcement of the surface of road and bridge.
