Find Verified Carbon Steel Crusher Suppliers, Manufacturers and Wholesalers

Mixer is a kind of construction machinery, which is mainly used to mix cement, sand, all kinds of dry powder mortar and other building materials. This is a machine with a shaft with blades rotating in a cylinder or tank to stir and mix a variety of raw materials into a mixture or suitable consistency. There are many kinds of mixers, including forced mixer, single horizontal shaft mixer, double horizontal shaft mixer and so on.
working principle
The mixer is determined by multiple parameters. It is impossible to describe a mixer with any single parameter. Shaft power (P), blade discharge (q), head (H), blade diameter (d) and mixing speed (n) are five basic parameters to describe a mixer. The discharge volume of the blade is directly proportional to the flow standard of the blade itself, the first power of the blade speed and the third power of the blade diameter. The shaft power consumed by mixing is directly proportional to the specific gravity of the fluid, the power standard of the blade itself, the third power of the rotating speed and the fifth power of the blade diameter. Under the condition of certain power and blade form, the discharge volume (q) and pressure head (H) of the blade can be adjusted by changing the matching of the diameter (d) and speed (n) of the blade, that is, the large-diameter blade with a mixer with low speed (ensuring constant shaft power) will produce higher flow effect and lower pressure head, while the small-diameter blade with high speed will produce higher pressure head and lower flow effect. In the stirred tank, the only way to make the micro clusters collide with each other is to provide sufficient shear rate. From the mixing mechanism, it is the existence of fluid velocity difference that makes the fluid layers mix with each other.

Manufactured directly, with strict quality control to ensure consistent performance and cost efficiency.

High-performance carbon nanopowder with an onion-like structure.

Offering exceptional electrical conductivity, thermal stability, and self-lubricating properties.

Ideal for metal alloys, lubricants, composites, and polymer enhancements.

Carbon black can be used in tire and rubber products reinforcement, It is pure black powder or ganular, and has high reinforcement capacity for rubber products and tire manufacture, and could increase rubber service life.

â?¢ Analysis methods: according to GB3778-2021 Product Standards.

We can all is tailor the specification to meet customer choice.

packing:
1000kg(1MT) bag, 500kg bag, and 20kg bag depends on the specific requirement of customers.

Carbon Blocks used in furnace having a great alternative against Petcoke.
As it has high melting power and cheap as compared to Petcoke.
Here in India, we are a supplier and exporters of Carbon blocks.

Parameters-
Total moisture (Mt): 1.80%
Ash(Aad): 13.07
Volatile matter (Vad): 13.94
Fixed Carbon (FCad): 77.88
Sulfur (S): 3.10

We are supplier and exporter of Activated Carbon.

Granular Activated Carbon Products range from the size 0.2mm to 3.75mm. Granular Activated Carbon has relatively larger particles size compared to powdered activated carbon and consequently, presents a smaller external surface. Powdered Activated Carbon Powdered Activated Carbons are small activated carbon particles, with a size that is predominantly less than 0.075 mm.

Activated Carbon is used worldwide in purification of Water, Air, etc. We are producers Dura specie of Palm Kernel Shells Powder & Pellets Activated Carbon, with over 1600 Iodine level and equally high level of Harness.

We are exporter of Activated Carbon.

Activated carbon made from raw organic material such as coconut shell. The raw material of activated carbon pulverized and sieved into appropriate and uniform particle sizes. Carbon has been used as an adsorbent for centuries. Activated carbon is a particularly good adsorbent due to its high surface area to volume ratio.

Grade: 1. Carbon Black PL330J
2. Carbon Black PL330C
3. Carbon Black PL330C
4. Carbon Black PL550C
5. Carbon Black PL550B
6. Carbon Black PL550C
7. PL660B Beads
8. Carbon Black P330
9. Carbon Black P550
10. PL772B Beads

Purity: 1.OAN (ml/100 gm) >90
2.OAN (ml/100 gm) >90
3.OAN (ml/100 gm) >95
4.OAN (ml/100 gm) >100
5.OAN (ml/100 gm) >100
6.OAN (ml/100 gm) >100
7.DBP No (OAN) (cc/100 gm) >100
8.DBP No (OAN) (cc/100 gm) >100
9.DBP No (OAN) (cc/100 gm) >105
10.DBP No (OAN) (cc/100 gm) >90
Actual price will be provided after your enquire.

We deals in the following products of India, China, Taiwan and Korea Origin:-
1) Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc.)
2) Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc.)
3) Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc.)
4) Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc.)
5) Steel Tube and Pipes (ERW, CRW, CRS, Black, Galvanized, Stainless)
6) Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps.
7) Heavy Duty Props & Light Duty Props.
8) Nuts, Bolts, Nails & Fasteners
9) System Scaffolding, Base Plate & Adjustable Base.
10) Steel Tie Rod, Waller Plates and Wing Nuts.
11) Drop Forged and Pressed Sheet Metal Couplers of all types.
12) Steel Billets, Steel Angle & Steel Channels.

Price: After receiving complete details

Carbon Steel Wire Rod, Bright, Hex, Round, Flat, Hexagon, Triangle, Square Bar :: ASTM / ASME A 105.

Alloy Steel Wire Rod, Bright, Hex, Round, Flat, Hexagon, Triangle, Square Bar :: ASTM / ASME A 182 GR F 5, F 9 , F 11 , F 12 , F 22 , F 91. ASTM / ASME A 729 GR B 11 & B 22.

Selected Anthracite Coal Granular Activated carbon for amine purify ,remove EDA, MEDA, DIPA, etc
Granular Coal based activated carbon is made from coal though high temperature activation .It is black in appearance, non-toxic and tasteless, with large pores. It is featured by strong adsorption capacity, high wear-resistant performance etc. It is evtensively applied to solvent recovery, catalyst carriers, gas adsorption and water purification in the field of chemicals, environmental protection, power plant, electronics, petrochemical industry, farming, medicine, marine transportation.
Packing
25kg PVC bags+1MT big bag or as customers'requested
Trade terms
FOB CNF CIF
Payments
terms
1).T/T 30%advance ,
2).the balance against copy of B/L
Delivery time
After we receive deposit within 7-10days
Sample
Sample is free within 1kgs

Appearance - Black Powder
Particle size - 5-10 um
Surface area - 2000 m2/g
C content - >95%

Particle Size(mesh) - 4-8, 5-10, 6-12, 10-24, 8-30, 20-40
Packing Density (g/ml) - 0.45-0.55
Hardness (%) - 95
Ash Content (%) - 5
Moisture (%) -10
Iodine Value (mg/g) - 900-1250
PH - 6-9

Packaging Details
25kgs/bag, or 500kg/big bag

Thickness Tolerance+/-0.01mm
Width Tolerance+/-0.05mm
Surface nature, blue, yellow, white, polished, white polished, bright, black
Coils weight as your request
MOQ 1 Ton
Monthly capacity 500 Tons
Package Standard Seaworthy Package
Payment L/C, Western Union, D/P, D/A, T/T, Trade assurance
Application
band saw blade, rolling shutter spring, bricklayer trowel, plaster trowel, putty knives, scraper, power trowel blade, lawn trowel
blade, shoe insole, flat spring, toy spring, spring baskets etc.

Color Light Blue

Material MS
Machine Structure Horizontal

Port India port

Spring steel strip
Steel grade
65Mn,1065,SAE1055,1045,CK50,CK55, CK60,CK67, CK70,CK75, C75Cr1,50CrV4, 51CrV4, 60Si2Mn, etc
Thickness 0.08-4.0mm
Width 3-400mm
Hardness <200HV, 200-300HV, 300-550HV
Edge slit edge; both rounded; one side round, one side slit; square etc
Surface polished (blue, yellow, white, grey-blue, black, bright) or Nature etc
Tolerance thickness +/-0.01mm max; width +/-0.05mm max
Physical propety Tensile strength: 450-1850N/mm2

Material Grade
CK50,CK67,CK75, CK95,51CrV4,75Cr1 ,SK5, SAE1070,SAE1074,C67S ,C75S etc.
Condition
hardened and tempered, cold rolled annealed
Hardness
18-55HRC
Surface
polish-blue,gery-blue,polished brightï¼?golden etc.
Thickness
0.08-3 mm
Width
3-1500 mm
Tolerance
thickness+/-0.01mm max,width +/-0.05mm max
Tensile strength
540-1575N/mm2

Product Name
Carbon steel plate 25crmo4 alloy steel sheet price
Thickness
3mm~300mm,2mm-100mm is common thickness,also can customize
Width
1000~3000mm,common width is 1250mm,1500mm,2000mm,2200mm
Length
1000~12000mm,can as your request cut
Surface
Clean,finished, blasting and painting or as your request
Delivery
Hot Rolled, Controlled Rolling,Normalizing,Annealing, Tempering,Quanching, Q+T
Packing
Steel Strapping,fixing in the Container,can customize

Product Name

Hot rolled steel sheet

Thickness

plate:0.35-200mm strip:1.2-25mm

Length

1.2m-12m or according to customer's special request

width

610,760,840,900,914,1000,1200,1250mm

Tolerance

Thickness: +/-0.02mm, Width:+/-2mm

Material grade

Q195 Q215 Q235 Q345

SS490 SM400 SM490 SPHC SPHD SPHE SPHF

SEA1002 SEA1006 SEA1008 SEA1010

S25C S35C S45C

65Mn

SPHT1 SPHT2 SPH3 SPH4

QstE

Others as your requirement

surface

iron gray (low carbon plate), brown (special alloy plate, the high carbon plate), partial ochre (weather resistance), with temperature oxidation pattern, than manufacture rough surface

Grade
SS400 Q235 S235JR 20# Q345 etc
Thickness
0.75mm - 200mm
Width
100mm - 1250mm or as your requirements
Length
customized as your requirements
Standard
ASTM,AISI,SUS,JIS,EN,DIN,BS,GB,etc
Delivery time
3 days for in stock, 7 days for new production

Carbon anode FC 90% -96% , clean , containers will be loaded full capacity