SI 0.28 p 0.004% V.m 10 .15 ash 4.0% fe 0.25% resistivity 65 .90 Density 1.46g&cm compression strength 18mpa real density 1.98gcm
Carbon Electrode Paste / Soderberg Electrode Paste Quality Specification: At the customers end the paste is fed in the upper part of the electrode it softens and melts forming the shape of the electrode casting. Flow ability of carbon electrode paste is essential for proper operation of electrode. It is important that the paste flows at a reasonable temperature and fills the casting of the electrode, maintaining a consistent mixture of components. The paste then gets baked to a solid mass as it moves down and is capable of passing the required current to the furnace charge. The plasticity of paste , the measure of its flow ability is controlled in the mixer by adjusting the binder content or percentage of coke fines. The lower baked part of the electrode is the final electrode product. The physical properties of this paste are of vital importance to ensure proper electrode operation without breakages. Green paste: A) Plasticity : 30-35%, 35-40% (or as per buyers requirement ) B) V.M. : 12-14% C) ash : 0.5% max D) f.C. : 86% min E) Apparent density : 1.58gm/ccmin. Baked paste : A) f.C. : 99% min B) porosity : 22-24% C) Apparent density : 1.36gm/cc min D) ccs : 250kg/cm2 min E) electrical resistivity : 70-90 micro ohm meter. Size : mould of 24ö dia & 4ö thick (wt. Approx 46kg. To 48 kg. Per block). 24" dia & 4"thick approx 46 to 48 per block. Size in briquette form or as per buyers requirement can also be made available.
Egg shape electrode paste , ton bags package Trapezoid shape electrode paste, upper 12.5*7.5cm, bottom: 9.0*4.5cm, height:7.5cm Cylinder sodergerg electrode paste, customized. such as 600*500mm,450*750mm,500*1000mm.etc.
Carbon paste Quality specification: At the customerÆs end the paste is fed in the upper part of the electrode it softens and melts forming the shape of the electrode casting. Flow ability of carbon paste is essential for proper operation of electrode. It is important that the paste flows at a reasonable temperature and fills the casting of the electrode, maintaining a consistent mixture of components. The paste then gets baked to a solid mass as it moves down and is capable of passing the required current to the furnace charge. The plasticity of paste , the measure of its flow ability is controlled in the mixer by adjusting the binder content or percentage of coke fines. The lower baked part of the electrode is the final electrode product. The physical properties of this paste are of vital importance to ensure proper electrode operation without breakages. Green paste: A) Plasticity : 30-35%, 35-40% (or as per buyerÆs requirement ) B) V.M. : 12-14% C) ash : 0.5% max D) f.C. : 86% min E) Apparent density : 1.58gm/ccmin. Baked paste : A) f.C. : 99% min B) porosity : 22-24% C) Apparent density : 1.36gm/cc min D) ccs : 250kg/cm2 min E) electrical resistivity : 70-90 micro ohm meter. Size : mould of 24ö dia & 4ö thick (wt. Approx 46kg. To 48 kg. Per block). 24" dia & 4"thick approx 46 to 48 per block.
We are your reliable source for high-quality welding electrodes that deliver exceptional performance in diverse welding applications. We recognise that the welding industry demands products that are durable, efficient, and capable of producing superior welds. Our unique challenge lies in ensuring that the welding electrodes we import adhere to stringent quality standards. To address this, we partner with established manufacturers who have a proven track record of delivering reliable welding products. We conduct comprehensive quality control checks on each batch of welding electrodes, verifying their chemical composition, tensile strength, and welding performance. By doing so, we guarantee that the welding electrodes we supply consistently meet or exceed industry standards, enabling our customers to achieve impeccable welding results.
Ash: 5%~7%max V.M: 9.5~13%max Compressive Strength: 15.7~19.6 Resistivity:68~80 Elongation:5~20 Bulk Density: 1.36 MOQ: 200T
Carbon electrode paste scrap.Trading
Carbon electrode paste and tamping paste.Manufacturer
The graphite electrode comprises: (1) Regular power graphite electrode( RP grade Graphite Electrode) . Graphite electrode with current density less than 17a / cm2 is allowed to be used in common power electric furnaces for steelmaking, silicon smelting and yellow phosphorus smelting. (2) Oxidation resistant coating graphite electrode. A graphite electrode coated with an anti-oxidation protective layer (graphite electrode anti oxidant). The formation of both conductive and high temperature oxidation resistant protective layer can reduce the electrode consumption (19% ~ 50%), prolong the service life of the electrode (22% ~ 60%), and reduce the electric energy consumption of the electrode. The popularization and application of this technology can bring such economic and social effects as follows: 1. The unit consumption of graphite electrode is less, and the production cost is reduced to a certain extent. For example, according to the consumption of 35 graphite electrodes per week and 165 refining heats of LF refining furnace in a steel-making plant without shutdown in the whole year, 373 (153 tons) electrodes can be saved every year by using graphite electrode oxidation resistance technology, and RMB 2585700 can be saved by RMB 16900 per ton of ultra-high power electrode per year. 2 The graphite electrode consumes less electricity, saves the unit electricity consumption of steelmaking, saves the production cost, saves energy! 3. Because the graphite electrode is replaced less times, the labor amount and risk coefficient of operators are reduced, and the production efficiency is improved. 4 Graphite electrode is a high consumption and high pollution product, which has a very important social significance in the days of promoting energy conservation, emission reduction and environmental protection. This technology is still in the stage of research and development in China, and some domestic manufacturers have begun to produce it. It is widely used in Japan and other developed countries. At present, there are also companies that import the anti-oxidation protective coating in China. (3) High power graphite electrode (HP grade Graphite Electrode). Graphite electrode with current density of 18-25a / cm2 is allowed to be used in high power electric arc furnace for steelmaking. (4) Ultra high power graphite electrode( UHP grade Graphite Electrode). Graphite electrode with current density greater than 25A / cm2 is allowed. It is mainly used in ultra high power EAF.
Water purification
UHP 400mm*1800mm UHP 450mm*1800mm Used in steel, cement and glass manufacturing, expanded graphite - based sealing gaskets, graphite grease, braid, brushes, brake lining, etc.
Shippment:20-24MT in one container or allocation of cargo 27MT for one 20 feet container (25kgs small bags) 20MT for one 20 feet container(1MT big bags) Ningxia carbon valley International Co. Ltd to provide carbon additive, cold ramming paste, carbon block/brick, graphite block, electrically calcined anthracite coal, electrode paste, silicon carbide, CPC,GPC,The products are sold to Japan, Vietnam,Taiwan, Korea, Malaysia, India, America, Kazakhstan, etc.
UHP 350mm Graphite Electrodes Iran UHP 350 Graphite Electrodes 350mm UHP Graphite Electrodes
Carbon Blocks used in furnace having a great alternative against Petcoke. As it has high melting power and cheap as compared to Petcoke. Here in India, we are a supplier and exporters of Carbon blocks. Parameters- Total moisture (Mt): 1.80% Ash(Aad): 13.07 Volatile matter (Vad): 13.94 Fixed Carbon (FCad): 77.88 Sulfur (S): 3.10
Iran 600mm UHP Graphite electrode Iran Artificial Graphite Electrodes UHP 600mm Iran 600 UHP Graphite Electrodes Iran 600mm UHP Graphite Electrodes
Low Resistance UHP Grade 600mm Graphite Electrodes Manufacturers Annual Production Capacity of Graphite Electrodes 50,000 MT. Paste electrodes of 200,000 MT. Large stock available.
Iran UHP 600 Graphite Electrode distributor Iran UHP Grade 600mm Graphite Electrodes wholesale LF UHP 600 Graphite Electrodes
UHP Dia 600mm Graphite Electrodes Manufacturer looking for 2" UHP 600 Graphite Electrode distributor 2" UHP Grade 600mm Graphite Electrodes wholesale in Iran market. Contact whats app 008615038021764
24" 96" 600mm UHP Graphite electrode Low Price UHP 600 Graphite Electrodes Factory Price UHP 600 Graphite Electrode Dia 600mm
Diameter 600mm 600mm UHP Graphite electrode Factory Price UHP 600 Graphite Electrode Dia 600mm Annual Production Capacity of Graphite Electrodes 50,000 MT. Paste electrodes of 200,000 MT. Large stock available.
