FIXEDCARBON 95%MIN SULPHUR 0.3% ASH 3.5%,MAX VOLATILE MATTER 1.5%MAX MOISTURE 0.5%MAX SIZE 1.5
Description: calcined anthracite coal is made from Ningxia Baiyun anthracite. F.C is between 90%-95%. Reduce the cost of steelmaking effectively by replacing the traditional petroleum coal of carburant. Also can improve the Carbon content in steel-making and Ductile iron foundry. Application: Carbon raiser has two main uses, namely as the fuel and additive Used in steel mill ladles, melting, holding and blast furnaces as recarburizer Used as a substitute of Calcined Petroleum Coke in a particular application
The Electrical Calcined Anthracite is used the best quality anthracite as raw materials through high temperature calcined at over 2000 by the DC electric calciner with results in eliminating the moisture and volatile matter from anthracite efficiently, improving the density and the electric conductivity and strengthening the mechanical strength and anti-oxidation. It has good characteristics with low ash, low resistvity, low sulphur, high carbon and high density. It is the best material for high quality carbon products to production of electrode, and used in cathode blocks for aluminum industry. 1.specification indexes: Fixed carbon 90% Ash 8% Volatile 1.2% Sulfur 0.35% Moisture 0.5% Resistivity 750 2 Fixed carbon 93% Ash 6% Volatile 1.0% Sulfur 0.30% Moisture 0.5% Resistivity 650 3 Fixed carbon 95% Ash 4% Volatile 1.0% Sulfur 0.25% Moisture 0.5% Resistivity 600 2.Real Density:1.80-1.90 G/CM3 min 3.Size:0-20mm,90%min; 1-20mm, 90%min; 1-10mm, 90%min,or at customers option; 4.Packing:In 1200kgs big bag; In 1000kgs big bag; In 25kgs small bag, then into 1000kgs big bag; or 25kgs or 50kgs small bag, then put into containers directly; or at customerâ??s option; 5.Payment:cash, letter of credit. Ningxia carbon valley International Co. Ltd to provide carbon additive, electrode,cold ramming paste, carbon block/brick, graphite block,half of graphite carbon block/brick,self baking carbon block,electrically calcined anthracite coal,electrode paste,silicon carbide,calcinde petrolem coke,The products are sold toJapan, Taiwan, Korea, India, America etc.
Model No. CAC-01 CAC-02 CAC-03 CAC-04 CAC-05 Fixed carbon(Min) 90% 92% 93% 94% 95% Ash(Max) 8.50% 6.50% 5.50% 4.50% 3.50% Volaltie matter(Max) 1.50% 1.50% 1.50% 1.50% 1.50% Sulfur(Max) 0.30% 0.30% 0.30% 0.30% 0.30% Moisture(Max) 0.50% 0.50% 0.50% 0.50% 0.50% Size 1-3mm,1-5mm
Type F.C Sulphur V.M Ash Moisture %(min) %(max) SQA-CAC-95 95 0.25 1.0 4.0 0.5 SQA-CAC-94 94 0.25 1.0 5.0 0.5 SQA-CAC-93 93 0.3 1.0 6.0 0.5 �·�·�· �·�·�· Size According to customer's requirement Packing: 1MT bags Or 25kg bags Or accroding to customer's requirement Supply Ablility: 4000MT per month
G-high calcined anthracite is produced when anthracite is calcined under the temperature of 1240¡ãc in vertical shaft furnaces. G-high calcined anthracite is mainly used in electric steel ovens, water filtering, rust removal in shipbuilding and production of carbon material. Specifications: Gh-cac-1 Fc(fixed carbon) 95% min, ash 4.0% max, vm(volatile matter) 1.0% max, s(sulphur)0.3% max, moisture 1.0% max Gh-cac-2 Fc(fixed carbon) 93% min, ash 5.5% max, vm(volatile matter) 1.5% max, s(sulphur) 0.3% max, moisture 1.0% max Gh-cac-3 Fc(fixed carbon) 90% min, ash 8.0% max, vm(volatile matter) 2.0% max, s(sulphur 0.5% max, moisture 1.0% max Size 1-3mm, 1-4mm, 1-5mm, 4-10mm, or at customers'option. At customers'option
Product properties 1high purity - control the consistency of raw material from the mine resource. - introduce automatic whole-process equipment to ensure product consistency. 2 good performance - increase globular graphite amount in the nodular cast iron significantly to promote the graphitization; - increase the graphite crystal nucleus of molten iron, refine graphite in the matrix for more uniform distribution; 3fine classification - various product category, to provide customized carbon raising scheme 4cost-saving - reduce the usage amount of iron, increase scrap consumption, and save raw material cost. How to use 1for 1-5 t furnace: - while a small amount molten iron in the furnace, - or with some molten iron remained, add the carbon additive one-time, - then add the other material. Which can make carbon additive fully absorbed. 2for greater than 5 t furnace: - mix proper carbon additive with charging material as suggested first, - and then along with the increase of charging material gradually, - that is, before the molten metal rising up to about 2/3 height of furnace, - all carbon additive shall be added. It guarantees sufficient melting & absorbing time before molten metal out, and improves the absorption of carbon.
With strong industrial experience, we make sure that the packaging is done as per the stated norms, by this; the products that we deliver are absolutely safe from the getting damaged. We are situated in Johannesburg(South Africa) and our well-developed network assists us in meeting the exact requirements of the clients.
Carbon Additive also called Calcined anthracite Coal, Gas Calcined Anthracite Coal, Carbon Raiser,Recarburizer,etc. The main raw material of our Carbon Additive is Ningxia unique high quality Taixi anthracite, with characteristic of low ash andlow sulfur. Carbon additive has two main usage, fuel and additive. When being used as the carbon additive of steel-smelting, and casting, the fixed carbon may achieve above 95%. Best quality Taixi anthracite as raw materials through high temperature calcined at 800-1200 â?? by the DC electric calciner with results in eliminating the moisture and volatile matter from Anthracite efficiently, improving the density and the electric conductivity and strengtheningthe mechanical strength and anti-oxidation, It has good characteristics with low ash, low resistivity, low carbon and high density. It is the best material for high quality carbon products, it is used as carbon additive in steel industry or fuel.
Calcined Anthracite coal is produced when Anthracite is calcined under the temperature of 1240 in vertical shaft furnaces, mainly used in electric steel ovens, water filtering, rust removal in shipbuilding and production of carbon material. Specification of carbon raiser: FC: 85% 88% 90% 91% 92% 93% 94% 95% Sulfur: 0.3% Ash: 3.5% 4.5% 5.5% 6.5% 8.5% 11.5% VM: 1.5% Moisture: 0.5% Size: 1-3mm, 1-4mm, 1-5mm
Product Description Using calcined anthracite coal carburizing agent and cast iron using carburizing agent steel, and other materials are also useful for adding to the carburant carburant is applied, steelmaking, iron carbon materials. High quality carburizing agent is essential to producing high quality steel auxiliary additives. Usage: For 1-5 T furnace: - while a small amount molten iron in the furnace, - or with some molten iron remained, add the carbon additive one-time, - then add the other material. which can make carbon additive fully absorbed. For greater than 5 T furnace: - mix proper carbon additive with charging material as suggested first, - and then along with the increase of charging material gradually, - that is, before the molten metal rising up to about 2/3 height of furnace, - all carbon additive shall be added. It guarantees sufficient melting & absorbing time before molten metal out, and improves the absorption of carbon.
For the calcined anthracite, fob 320-420usd tianjing port, quotation is valid utill this month, perment term is t/t. But the cost might be different at different purchasing date, so we need to check and update the offer for u again that day when u confirm order date exactly later, please be noted. The calcined anthracite coal is through high temperature treatment and screening, uniform particles, is one of the ideal materials for carburizer and electrode paste. In China, anthracite is usually calcined in electric calciners, rotary kilns and pot furnaces, and the anthracite produced in electric calciners is called as electrically calcined coal (ECA for short) while the anthracite produced in other two calciners is called as gas calcined coal (GCA for short). Electrically calcined anthracite coal, Electrical forging material is made from high-quality anthracite and during calcining, the temperature up to 2000 By calining the high-qualityanthracite, the Coal lattice is hanged Then the anthracite becomes half graphitization. Then the material can meet many demands by changing its physical and chemistry character The specification. Due to it is low in volatile matters, good in thermal and electrical conductivity with the powder resistivity about 600 and mainly used in carbon bricks, electrode pastes and cathode carbon blocks with certain requirements for electrical conductivity. Moreover, the proportion and particle size of ECA in such products vary depending on the situation of different enterprises. The calcination temperature of GCA is about 1200 and its electrical conductivity is far inferior to that of ECA, but the sulfur content of anthracite is usually 0.3-0.5%. GCA is widely used in steel and foundry industry as coal recarburizer by virtue of its higher cost performance. We have established a long-term cooperative relationship with anthracite plants in Vietnam. We also provide calcined anthracite coal and dried anthracite coal from Vietnam: Calcined Anthracite Coal FC 95% ASH 4% S 0.5% FC 92% ASH 6.5% S 0.5% Dried Anthracite Coal FC 85% Ash 11% VM 4% S 1% MO: 5% FC87% Ash7 VM 7% S 0.65 MO:5%
Supply Carbon raiser CAC/Calcined anthracite coal: FC: 85%, 88%, 90%, 91%, 92%, 93%, 94%, 95%, Sulfur: 0.3%, Ash: 3.5%-18%, VM: 1.5%, Moisture: 0.5%max, Size: 0-1mm, 1-5mm or as required.
Ningxia carbon valley International Co. Ltd to provide carbon additive, cold ramming paste, carbon block/brick, graphite block, electrically calcined anthracite coal, electrode paste, silicon carbide, CPC,GPCï¼?The products are sold to Japan, Vietnam,Taiwan, Korea, Malaysia, India, America, Kazakhstan, etc.
Carbon Raiser with FC 90-95% 1. FC: 90-95% Min 2. Ash: 4.5-8.5% Max 3. V. M.: 1-1.5% Max 4. S: 0.25-0.35% Max 5. Moisture: 0.3-1% Max 6. Size: 0.5-3mm, 1-4mm, 0.5-4mm, 1-3mm, 90%min, or at customer's option 7. Packing: In 1000kgs big bag; Or 1200kgs big bag; Or 25kgs small bag, then into 1000kgs big bag; Or 25kgs or 50kgs small bag, then put into containers directly; Or at customer's option 8. Lead Time: 20-25 days upon receipt of your prepayment 9. Payment Term: (1) 30% TT as deposit, the balance will be paid after receiving copy of BL. (2) 100% LC at sight if your quantity is big. Features: Carbon Additive also called Calcined anthracite Coal, Gas Calcined Anthracite Coal, Carbon Raiser. The main raw material is Ningxia unique high quality anthracite, with characteristic of low ash and low sulfur. Carbon additive has two main uses, namely as the fuel and additive. When being used as the carbon additive of steel-smelting, and casting, the fixed carbon may achieve above 95%.
Pls send me your requirements to my email or then i will send back you our products' catalog and offer the competitive price with good quality.
Anthracite coal
Carbon additive 1. Product description: The main raw material is ningxia unique high quality anthracite, with characteristic of low ash and low sulfur. Carbon additive/carbon raiser has two main uses, namely as the fuel and additive. When being used as the carbon additive of steel-smelting, and casting, the fixed carbon may achieve above 95%. 2. Application: It may substitute massively refinery coke or the stone grinds. Meanwhile its cost is much less than the refinery coke and the stone grinds. Carbon additive/carbon raiser may also use as the fuel, for its calorific value may achieve above 9386k/kg. It may substitute burnt carbon massively. The burnt carbon exportation needs the quota; therefore the carburizing agent price superiority is similarly obvious. 3. Specification: Carbon raiser: 90%min; s: 0.35%max; ash: 8.5%max; v.M: 1.5%max; h2o: 0.5%max; 91%min; s: 0.35%max; ash: 8%max; v.M: 1.2%max; h2o: 0.5%max; .C: 92%min; s: 0.3%max; ash: 6.5%max; v.M: 1.2%max; h2o: 0.5%max; 9:f.C: 93%min; s: 0.3%max; ash: 5.6%max; v.M: 1.2%max; h2o: 0.3%max; ,94%min; s: 0.25%max; ash: 5.0%max; v.M: 1.0%max; h2o: 0.5%max; ,f.C: 95%min; s: 0.25%max; ash: 4%max; v.M: 1%max; h2o: 0.5%max; Size: 1-5mm/1-4mm, 90%min, or at customers' option; Moq: 40mt(20mt for a 20' container); Packing: in 25kg small bags or in 1mt/1.2mt big bags;
Carbon raiser used real Anthracite Coal as material. different material with different price in the market. In fact, the unit cost of carburizer in bituminous(soft) coal production is much higher than that in anthracite production. For example, for steel plants, 300 tons of anthracite carburizer is needed for 200000 tons of steel, but 500 tons of bituminous coal carburizer is needed. Any interesting,please contact us freely. wechat/WhatsAPP numbervis 008613739698406 E-mail ID is sophiawang110609@163.com
We are mandate, of a large mining consortium As we are direct representatives, it facilitates commercial dialogues and allows us to offer the following products. - Thermal coal type A and type B. (MOQ 30,000 Mt) - Anthracite coal or black coal. (MOQ 15,000 Mt) - Metallurgical coal or coking coal. (MOQ 20,000Mt) Buyers interested in these products send a message or request. You can leave your contact information and I will respond by WhatsApp or email.
