Calcined Anthracite Coal Cac Suppliers and Manufacturers

Supply Carbon raiser CAC/Calcined anthracite coal: FC: 85%, 88%, 90%, 91%, 92%, 93%, 94%, 95%, Sulfur: 0.3%, Ash: 3.5%-18%, VM: 1.5%, Moisture: 0.5%max, Size: 0-1mm, 1-5mm or as required.

We are mandate, of a large mining consortium As we are direct representatives, it facilitates commercial dialogues and allows us to offer the following products. - Thermal coal type A and type B. - Anthracite coal or black coal. - Metallurgical coal or coking coal. - Coke Buyers interested in these products send a message or request. You can leave your contact information and I will respond by WhatsApp or email.

COAL!!! We represent several coal mining consortia worldwide, which makes commercial dialogues direct from the beginning with their representatives, this facilitates communication and allows for more agile negotiations. We currently have the following types of coal available for interested buyers: - Thermal carbon - Type A - Type B - Anthracite - Coke. Interested buyers please send complete requirements to receive more specific information about coal such as technical sheets and prices. Additionally, please attach the company profile, this is by protocol of the mining companies who will carry out the respective Due Diligence to initiate commercial dialogues. Contact: Josa Huertas.

Calcined anthracite coal (cac), carbon blocks, graphitized petroleum coke(gpc), calcined petroleum coke(cpc), pitch coke, silicon carbide, graphite electrode, graphite electrode scrap and graphite blocks.

Calcined anthracite coal (cac), carbon blocks, graphitized petroleum coke(gpc), calcined petroleum coke(cpc), pitch coke, silicon carbide, graphite electrode, graphite electrode scrap, graphite blocks, calcium aluminate flux.

Description: calcined anthracite coal is made from Ningxia Baiyun anthracite. F.C is between 90%-95%. Reduce the cost of steelmaking effectively by replacing the traditional petroleum coal of carburant. Also can improve the Carbon content in steel-making and Ductile iron foundry. Application: Carbon raiser has two main uses, namely as the fuel and additive Used in steel mill ladles, melting, holding and blast furnaces as recarburizer Used as a substitute of Calcined Petroleum Coke in a particular application

The Electrical Calcined Anthracite is used the best quality anthracite as raw materials through high temperature calcined at over 2000 by the DC electric calciner with results in eliminating the moisture and volatile matter from anthracite efficiently, improving the density and the electric conductivity and strengthening the mechanical strength and anti-oxidation. It has good characteristics with low ash, low resistvity, low sulphur, high carbon and high density. It is the best material for high quality carbon products to production of electrode, and used in cathode blocks for aluminum industry. 1.specification indexes: Fixed carbon 90% Ash 8% Volatile 1.2% Sulfur 0.35% Moisture 0.5% Resistivity 750 2 Fixed carbon 93% Ash 6% Volatile 1.0% Sulfur 0.30% Moisture 0.5% Resistivity 650 3 Fixed carbon 95% Ash 4% Volatile 1.0% Sulfur 0.25% Moisture 0.5% Resistivity 600 2.Real Density:1.80-1.90 G/CM3 min 3.Size:0-20mm,90%min; 1-20mm, 90%min; 1-10mm, 90%min,or at customers option; 4.Packing:In 1200kgs big bag; In 1000kgs big bag; In 25kgs small bag, then into 1000kgs big bag; or 25kgs or 50kgs small bag, then put into containers directly; or at customerâ??s option; 5.Payment:cash, letter of credit. Ningxia carbon valley International Co. Ltd to provide carbon additive, electrode,cold ramming paste, carbon block/brick, graphite block,half of graphite carbon block/brick,self baking carbon block,electrically calcined anthracite coal,electrode paste,silicon carbide,calcinde petrolem coke,The products are sold toJapan, Taiwan, Korea, India, America etc.

Model No. CAC-01 CAC-02 CAC-03 CAC-04 CAC-05 Fixed carbon(Min) 90% 92% 93% 94% 95% Ash(Max) 8.50% 6.50% 5.50% 4.50% 3.50% Volaltie matter(Max) 1.50% 1.50% 1.50% 1.50% 1.50% Sulfur(Max) 0.30% 0.30% 0.30% 0.30% 0.30% Moisture(Max) 0.50% 0.50% 0.50% 0.50% 0.50% Size 1-3mm,1-5mm

Calcined Anthracite coal is produced when Anthracite is calcined under the temperature of 1240 in vertical shaft furnaces, mainly used in electric steel ovens, water filtering, rust removal in shipbuilding and production of carbon material. Specification of carbon raiser: FC: 85% 88% 90% 91% 92% 93% 94% 95% Sulfur: 0.3% Ash: 3.5% 4.5% 5.5% 6.5% 8.5% 11.5% VM: 1.5% Moisture: 0.5% Size: 1-3mm, 1-4mm, 1-5mm

Product Description Using calcined anthracite coal carburizing agent and cast iron using carburizing agent steel, and other materials are also useful for adding to the carburant carburant is applied, steelmaking, iron carbon materials. High quality carburizing agent is essential to producing high quality steel auxiliary additives. Usage: For 1-5 T furnace: - while a small amount molten iron in the furnace, - or with some molten iron remained, add the carbon additive one-time, - then add the other material. which can make carbon additive fully absorbed. For greater than 5 T furnace: - mix proper carbon additive with charging material as suggested first, - and then along with the increase of charging material gradually, - that is, before the molten metal rising up to about 2/3 height of furnace, - all carbon additive shall be added. It guarantees sufficient melting & absorbing time before molten metal out, and improves the absorption of carbon.

Anthracite coal, coal, silica sand.Buyer and procurement

For the calcined anthracite, fob 320-420usd tianjing port, quotation is valid utill this month, perment term is t/t. But the cost might be different at different purchasing date, so we need to check and update the offer for u again that day when u confirm order date exactly later, please be noted. The calcined anthracite coal is through high temperature treatment and screening, uniform particles, is one of the ideal materials for carburizer and electrode paste. In China, anthracite is usually calcined in electric calciners, rotary kilns and pot furnaces, and the anthracite produced in electric calciners is called as electrically calcined coal (ECA for short) while the anthracite produced in other two calciners is called as gas calcined coal (GCA for short). Electrically calcined anthracite coal, Electrical forging material is made from high-quality anthracite and during calcining, the temperature up to 2000 By calining the high-qualityanthracite, the Coal lattice is hanged Then the anthracite becomes half graphitization. Then the material can meet many demands by changing its physical and chemistry character The specification. Due to it is low in volatile matters, good in thermal and electrical conductivity with the powder resistivity about 600 and mainly used in carbon bricks, electrode pastes and cathode carbon blocks with certain requirements for electrical conductivity. Moreover, the proportion and particle size of ECA in such products vary depending on the situation of different enterprises. The calcination temperature of GCA is about 1200 and its electrical conductivity is far inferior to that of ECA, but the sulfur content of anthracite is usually 0.3-0.5%. GCA is widely used in steel and foundry industry as coal recarburizer by virtue of its higher cost performance. We have established a long-term cooperative relationship with anthracite plants in Vietnam. We also provide calcined anthracite coal and dried anthracite coal from Vietnam: Calcined Anthracite Coal FC 95% ASH 4% S 0.5% FC 92% ASH 6.5% S 0.5% Dried Anthracite Coal FC 85% Ash 11% VM 4% S 1% MO: 5% FC87% Ash7 VM 7% S 0.65 MO:5%

High Quality Anthracite Filter Media For Water Filtration anthracite which used water filtration Our Anthracite filer media has been made of the Taixi anthracite by washing, chosen as well as smash, continuous screening and so on procedures. It does have a nice lustrousness; resist compression, good mechanical strength, and steady chemical activity. We will offer you high quality anthracite filter media for the water filtration. Anthracite is an excellent filter media for water clarification in drinking or the industrial use, when it is used in combination with the filtering sands. It is among the most commonly used filtering media. What is anthracite ? Anthracite is a raw material for water purification as filter media. Anthracite has features of low ash, Sulphur , phosphorus and high calorific power, mass resistivity , percentage of lump coal, chemical activity, recycle rate of head coal, mechanical strength as well as enjoying trait of innocuity, in dissolvableness in acidic, neutral, alkaline water and so on. Our Anthracite filter media is made of Taixi anthracite by washing, chosen, smash, repeatedly screening and so on procedures. Anthracite has nice lustrousness , mechanical strength, resist compression, hard wearing and steady chemical activity. Also, Anthracite has some separate-absorb activity, which can absorb and disposal color, stink, flavor and minute organism in water, and applied to filter life water, industrial water as well as municipal sewage. Anthracite a nice material for environment protection.