C9 hydrocarbon resin used in adhesive: Advantage: 1> light color 2> liquidity is good, can improve the wettability of the material 3> fast adhesion 4> good heat resistance 5> good stickness 6> good compatibility with polymer matrix 7> excellent aging resistance 8> in hot melt adhesive, can mix with other viscosity resin to improve some characteristics of the hot melt adhesive C9 hydrocarbon resin used in adhesive: Items Unit Value Appearance Granule Softening point ? 100-130 Colors Ga# 2 -12 Ash content % =0.03 Acid value Mgkoh/g =1.0 Specific gravity G/cm3 =1.08 Melt viscosity Mpa.S 400-800 Packaging: Packed in 25kg paper bag or pp bag or pp compounding bag. In 20fcl without pallets 19mt or with pallets 16mt. Delivery time: Usually delivery at 6days after payment( if no special required ) Strorage: It should be stored in dry and cool place with fire fighting facilities.Far away from fire/sunshine/moisture.
hydrogenated C9 hydrocarbon resin which compete and substitute C5 resin in Hot Melt Adhesive and Road marking paint
HIPS repro pellet mixed color from yoghurt caps HIPS Recycled Pellets Thermoplastics PS has two representatives, GPPS and HIPS. In particular, PS HIPS plastic is the most popular to many advantages and applications. HIPS belongs to the group of hard, transparent resins that are easy to create color, processed by laminating film lamination and easy laminating technology. What is HIPS PLASTIC ? HIPS pellet stands for High Impact Polystyrene. Polystyrene has the chemical formula Polystyrene (C8H8)n which is a long chain hydrocarbon in which alternating carbon centers are attached to the phenyl group (the name given to the aromatic benzene ring). MATERIAL: HIPS repro pellet mixed color from yoghurt caps CATEGORY: HIPS repro TYPE: Pellet GRADE: Mixed color SPECIFICATION: Mixed color.from yoghurt caps Origin: Tunisia LOADING WEIGHT: 23 Ton FOB (USD/Ton): 900$ - 1150$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days
Specification: Softening Point()ï¼? 80-90 90-100 100-110 110-120 Color(Gardner in 50% toluene),â?¤ 8-18 8-18 8-18 8-18 Ash(%),â?¤ 0.08 0.08 0.08 0.08 Acidity(mgKOH/mg),â?¤ 0.6 0.6 0.6 0.6 Recommended Application Adhesive Paint, Tyre Rubber Adhesive, Tire Rubber Adhesive, Tyre Rubber Application: 1. Used in Hot melt adhesive(HMA) and Solvent based adhesive(SBA) as tackifier resin 2. Solvent based paint 3. Printing Ink 4. Rubber Compounding 5. Asphalt emulsion mixtures Any inquiry, pls contact sofia.chu(at)zzdenglan.com freely.
BP series is specially designed for adhesives application. Characterised by lighter colour, less odour as well as wider compatibility and solubility, they are more suitable for hot melt adhesives, bookbinding, shoes adhesive and solvent adhesives etc.
TC100 / copolymerized hydrocarbon resin is produced with and fraction, which has and strengths.It can replace the expensive C5 hydrocarbon resin in hot melt adhesive and rubber tire fields. In rubber tires, TC100 hydrocarbon resin not only can increase the adhesive force between colloidal particles, but also can enhance the adhesion between the particle and the cord thread.TC100 hydrocarbon resin is suitable for producing high quality rubber products. In adhesive, TC100 hydrocarbon resin have better initial adhesion and it also can adjust the adhesive durability and bonding strength. Product Specification: Item Test Method Unit Specification Range Softening Point ASTM-E28-58 95-105 Color ASTM-D-1544 GC 4Max Insoluble ETM-E-99 Vol% 0.05Max Acid Value ASTM-D-974 Vol% 0.2Max Specific Gravity ASTM-D-71-72A g/ 0.99-1.03 Features of TC100 C5/C9 Copolymerized Hydrocarbon Resin: Wide optional range.It will be more stabilized by the addition of antioxidant.Good compatibility with EVA,SIS and SBS etc. Applications:Hot melt adhesive,Synthetic rubber
PN130 resin is yellow color C9 hydrocarbon resin obtained from the polymerization of unsaturated aromatic resin. The most important uses are vehicles for painting and ink.
PN140 resin is yellow color C9 hydrocarbon resin obtained from the polymerization of unsaturated aromatic resin. The most important uses are vehicles for asphalt and printing ink.
PE120 resin is thermoplastic, light brown color C9 hydrocarbon resin obtained from polymerizing unsaturated aromatic resin through the process of thermal polymerization. The major usages are paint and coating.
PE100 resin is thermoplastic, light brown color C9 hydrocarbon resin obtained from polymerizing unsaturated aromatic resin through the process of thermal polymerization. The major usages are rubber and paint.
PE130 resin is thermoplastic, light brown color C9 hydrocarbon resin obtained from polymerizing unsaturated aromatic resin through the process of thermal polymerization. The major usages are ink and asphalt.
PG100 resin is a kind of C5 modified C9 resin, with both character of C5 and C9 component, which is designed to tackify a variety of adhesive polymers, including ethylene vinyl acetate (EVA), styrenic block copolymers (SIS, SBS, SEBS), amorphous polyalphaolefins (APAO).
High compatibility c9 aromatic hydrocarbon petroleum resin for hot melt adhesive Quick detail: Hsu™ hs110-4 is c9 aromatic hydrocarbon petroleum resin. Description: Hsu™ hs110-4 is a low odor, light color thermoplastic hydrocarbon resin produced from purified aromatic petroleum-derived monomers with a naphthalene elimination process. It is characterized by low odor and high level compatibility. It is compatible with many resins, mineral oils and polymers. Good compatibility with major solvents in industrial paints and adhesives. It is mainly used in industrial paints and adhesives. High compatibility c9 hydrocarbon resin Applications: Wood working adhesive, hot melt adhesives, rubber compounding. High compatibility c9 hydrocarbon resinhigh compatibility c9 hydrocarbon resin High compatibility c9 hydrocarbon resin Specifications: Grade no. Hsu™ hs110-4 Softening point(°c) 110±5 Color g# 4# max Acid value(mg koh/g) max. 0.3 Competitive advantage: • excellent compatibility with various base polymers • good chemical stability • high heat resistance and water resistance • excellent tack and peel properties • low volatility and low odor Packaging & shipping 1. Packed in 25kg paper bag, pp bag or paper and pp compounding bag 17 mt without pallets or 14.5mt with pallets for 1*20fc Also can use 750kg container sack, 15mt with pallets for 1*20 fcl. 2. Payment: irrevocable l/c at sight, or 30%t/t in advance 3. Shipment: in 20 days after 30% t/t deposit High compatibility c9 hydrocarbon resin Storage & protection They are non-hazardous product, it should be stored in dry and cool place with fire fighting facilities. Far away from fire, sunshine, moisture and pollution.
C9 hydrogenated hydrocarbon petroleum resin Chemical name: c9 hydrogenated petroleum resin Physical properties: it is produced through the process of refinement, isolation, polymerization and molding with the raw material of hydrocarbon resin c9 which is the by product from the ethylene fragment. The product is white granular, aromatic resin, which is easily soluble in organic solvents such as benzene and toluene etc. It has good compatibility, thermal stability, light stability, good water resistance and chemical resistance. Product specification: Test item C9 hydrogenation # 100 Test method Appearance White granular Eyeballing Softening point(°c) 95-120 Gb/t4507(ring&ball) Acid value(koh mg/g) =1.0 Gb2895 Color gardner (ga) 0-1 Astmd-1544 Melt viscosity(200°c)cps =400 Astmd-3236 Insoluble (vol%) ------ Ash content
Tc100/ copolymerized hydrocarbon resin is produced with and fraction, which has and strengths.It can replace the expensive c5 hydrocarbon resin in hot melt adhesive and rubber tire fields. In rubber tires, tc100 hydrocarbon resin not only can increase the adhesive force between colloidal particles, but also can enhance the adhesion between the particle and the cord thread.Tc100 hydrocarbon resin is suitable for producing high quality rubber products. In adhesive, tc100 hydrocarbon resin have better initial adhesion and it also can adjust the adhesive, s durability and bonding strength. Product specification: Itemtest methodunitspecification range Softening pointastm-e28-58 , 95-105 Colorastm-d-1544gc4max Insolubleetm-e-99vol%0.05max Acid valueastm-d-974vol%0.2max Specific gravityastm-d-71-72ag/0.99-1.03 Features of tc100 c5/c9 copolymerized hydrocarbon resin: Wide optional range.It will be more stabilized by the addition of antioxidant.Good compatibility with eva, sis and sbs etc. Applications:hot melt adhesive, synthetic rubber Package: 25kg kraft paper bag Storage: All resins with low softening point present a risk of solidifying or lump. For softening point less or equal to 110, , we suggest you keep resin in a cool (25, max) ventilated place and avoid direct sunshine.
Commodity: Synthetic Cryolite Formula: Na3AlF6 M.W.: 209.95 Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively. Specifications: Appearance white powder F 52% min Al 12% min Na 33% max SiO2 0.36% max Fe2O3 0.08% max CaO 0.5% max P2O5 0.03% max SO4 0.6% max H2O 0.4% max Loss on ignition 2 % max Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels. Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.
We are supplier and exporter of PVC Resin. PVC resin, the physical appearance is white powder, non-toxic, odorless. Relative density 1.35-1.46. It is thermoplastic, insoluble in water, gasoline and ethanol, expandable or soluble in ether, ketone, fatty chlorohy-drocarbons or aromatic hydrocarbons with strong anti--corrosiveness, and good dieletric property. PVC resin can be processed into various plastic products.
Organic Products Concerned with Chemical Industry Raw material to various organic products, compounds of carbon such as the hydrocarbons, combinations of hydrogen and carbon. Applications / Industries : Crude oil into more refined products , polymer and plastic production , food industry, health care , pigments, synthetic rubber, polymers, resins and explosives. Plastics, salts, acids and fertilizers are also widely used. Consumer goods industries, agriculture and manufacturers all use these products. Read more: What types of industries are the main consumers of the products of the chemicals sector? | Investopedia https://www.investopedia.com/ask/answers/042015/what-types-industries-are-main-consumers-products-chemicals-sector.asp#ixzz5QCz9qi4A Follow us: Investopedia on Facebook
1 load GPPS natural purge and regrind is available It has 3% moisture. They are from PS resin manufacturer Pls recheck stock again once price confirmed USA origin
CAS 1321-74-0 HS 2902909000 200L/DRUM,12.96tons/20'container Divinylbenzene is a hydrocarbon organic substance, which is a very useful cross-linking agent, widely used in ion exchange resin; Leaving the exchange membrane; ABS resin; Polystyrene resin; Unsaturated polyester resin; Synthetic rubber, etc.. Application Of Divinylbenzene Cas 1321-74-0 1.Used as raw material for resin, paint and special rubber Organic synthesis. Divinylbenzene has two ethylenes, which can be copolymerized to form a three-dimensional structure of insoluble and immiscible polymer. Therefore, it is a very useful cross-linking agent, widely used in ion exchange resin; Leaving the exchange membrane; ABS resin; Polystyrene resin; Unsaturated polyester resin; Synthetic rubber; Wood processing; Carbon processing, etc
