C Beam V Slot Aluminium Profile
Basic Info
C beam V slot aluminium profile
Item name
Material: 6063-T5 (Alloy 6000 Series)
Temper: T5T6
Technology: Aluminum Extrusion
Surface treatment: Mill finish, anodizing, powder coated, sandblasting, electrophoresis etc
Color: Silver & Black (C beam V slot aluminium profile Item name:Material:6063-T5 (Alloy 6000 Series)Temper:T5T6Technology:Aluminum Extrusion Surface treatment:Mill finish, anodizing, powder coated, sandblasting, electrophoresis etc.
Color:Silver & Black (Optional)Size:2020/2040/2060/2080/4040/4080 (Optional)Length:100mm-3000mm or as request
Deep processing:cutting, drilling, punching, bending etc
Quality control:1.ISO Approved.2.Inspection at Site.3.Inspection Before Shipping.4.Testing Machine.Packing details:1.EP Paper inside for each profile separate then craft paper outside2.EP Paper inside for each profile separate then carton paper then pallet3. Shrink film4.wooden carton)
Size: 2020/2040/2060/2080/4040/4080 (Optional)
Length: 100mm-3000mm or as request
Deep processing: cutting, drilling, punching, bending etc
Quality control: 1.ISO Approved.
2.Inspection at Site.
3.Inspection Before Shipping.
4.Testing Machine.
Packing details: 1.EP Paper inside for each profile separate then craft paper outside
2.EP Paper inside for each profile separate then carton paper then pallet
3. Shrink film
4.wooden carton
Delivery: 3-5 working days for sample; 3-7 days for small orders; 7-15 days for bulk orders.
Payment: Paypal, Alipay, T/T(Bank Transfer), Western Union.
Hot to order: Tell us the size, length, color anodized and quantity you need, best quotation would be
C Beam V Slot Aluminium Profile Product pictures:
Our workshop:
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A:30% T/T in advance ,balance before shipment.
If you have another question, pls feel free to contact us as below:
Contact:
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA
Incinerator bottom ash).
It can be classified as follows:
Basel code B1010.
EW Code: 17 04 02.
With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks.
This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape.
The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace).
The stock can contain all kind of aluminium packing.
We can currently provide this material in three different fractions and with different aluminium content:
3-8 mm split in two different qualities:
65% ± 3% Al
85% ± 3% Al
8-16 mm: about 70% ± 3% Al
16-60 mm: about 80% ± 3% Al
The material contains minor impurities typically stones, ash, glass.
Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed.
The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
We are able to supply Tin in many forms including LME registered and
non registered, ingots, slabs, bars, foil, granules, powder, anodized
activated powder, shot, wire, sticks, ingots, and “mossy tin”.
Tin is a silvery-white metal, is malleable, somewhat ductile, and has a highly crystalline
structure. The element has two colours, with a cubic structure which changes at
allotropic forms. On warming it is grey, the ordinary form of the metal. When Tin is
cooled below 13.2°C, it changes slowly from white to grey or tetragonal structure. This
change is affected by impurities such as Aluminium and Zinc, and can be prevented
by small additions of Antimony or Bismuth.
Aluminum extrusion profile, plastic products factory, we are a manufacturer specializing in the production of supermarket hardware tools also make molds, plastic injection processing. extruded aluminum products is our conventional extrusion material including aluminium windows and aluminum doors, doors, door hinges, door locks, door hardware, extrusion processing of aluminum alloy profiles;and high precision processing of aluminum alloy extrusion products..Import and export
Bauxite is a soft, whitish to reddish-brown rock consisting mainly of alumina-bearing hydroxides, oxides of iron, silicon and titanium with impurities of Ca, Mg, Cr, V, P, Ga and other elements. Raw Bauxite is a major source of aluminium. Basic alumina containing minerals of Bauxites are gibbsite Al(OH)3, Boehmite g-AlO(OH) and Diaspore a-AlO(OH). We are a major Raw Bauxite Exporter based in Maharashtra (India) and catering to the diverse demands of several middle and eastern Asian countries.
About Raw Bauxite:
The processing of Raw Bauxite is done at a number of alumina refineries in the world. Bauxite can be processed at a low-temperature autoclave digestion (145 oC to 155 oC). Raw Bauxite can be used also for sweetening stage and for non-autoclave digestion in agitators (105 oC).
About 85% of bauxite mined worldwide is used to produce alumina for refining into Aluminium metal and the balance 15% is processed and value added to make its way to other uses like refractory, chemical, cement, abrasives, etc. Aluminium is possibly the most versatile product with applications in almost every industry. Since Bauxite is the primary source for Aluminium there will always be an ongoing promising demand for the same.
Application & Uses of Bauxite:
Raw Bauxite is successfully used for metallurgical grade alumina production besides applications in the cement industry, alumina chemical, steel, alum, energy industries, flame-retardants, etc. Bauxite is used in :
- Aluminium
- Cement
- Chemical
- Blast Furnaces
- Iron/Steel Ladles, etc.
Advantages of Artha Bauxite:
Artha Mineral Resources has good sources for Gibbsitic Bauxite which requires low digestion temperature (145 oC -155 oC) making it more economical to process. Mines are also in close proximity to all-weather ports which makes it very convenient and cost effective to ship this material.
6777 C Beam V Slot Aluminium Profile Suppliers
Short on time? Let C Beam V Slot Aluminium Profile sellers contact you.
Bauxite is a soft, whitish to reddish-brown rock consisting mainly of alumina-bearing hydroxides, oxides of iron, silicon and titanium with impurities of Ca, Mg, Cr, V, P, Ga and other elements. Raw Bauxite is a major source of aluminium. Basic alumina containing minerals of Bauxites are gibbsite Al(OH)3, Boehmite g-AlO(OH) and Diaspore a-AlO(OH)
Bauxite is used in a lot of industries like the chemical industry, refractory, abrasive, cement, steel, and petrol industry amongst others. In chemical, bauxite along with alumina is used in the manufacturing of aluminium chemicals. In refractory, it is used as a raw material for making several products.
The manufacture of both granulated and powdered garlic is the same, except for the grinding or powdering process. Granulated garlic is coarse while garlic powder is ground extra fine.
Whole cloves of garlic are peeled, cleaned and then sent into a machine that slices and chops them into smaller sections. The sections are dried in slow ovens for three to four hours. When the garlic has cooled it is ground to the desired consistency, be it granulated or powdered. The finished products are put through sifters to separate any debris or undesirable pieces. Both are packaged in air-tight containers and stored in a cool, dry place.
Granulated and powdered garlic are used to season and enhance the flavor of many foods. Often it is an appropriate substitute when fresh garlic is called for in a recipe. Powdered garlic dissolves almost instantly when incorporated into any dish, hot or cold. Granulated garlic takes a few minutes to become incorporated and release its flavor.
We can offer Garlic Granules in 0.5mm to 1.0mm, 40/60 mesh, 26/40 mesh
- 20 FCL: 10 Mt (Flakes/Cloves), 14-15 Mt (Minced/Granules/Powder)
- 40 FCL H/C: 20 Mt (Flakes/Cloves), 25-30 Mt (Minced/Granules/Powder)
Product Packing
- 12.5/13/14 Kg Paper Bag inside 1 Poly Bag
- 20/25 Kg Cartoon inside 1/2 Poly Bag
- 20/25 Kg Cartoon inside 1/2 Aluminium Foil Bag
Chemical Properties
Boiling point 40 C
density 0.967 g/mL at 25 C(lit.)
vapor pressure 23 hPa (195 C)
refractive index 1.439
Fp 82 F
storage temp. Flammables area
solubility Miscible with alcohol, isopropyl alcohol and toluene.
form Oily Liquid
Specific Gravity 0.9671
color Light yellow
Item Specifications
Appearance Colorless transparent or light yellow liquid
Purity % 99.99
Aluminum content % 10.2-12.5
Density ( g/cm3) 0.92-0.97
rLDPE repro Yellow pellets from post-consumer & post-industrial films.
The material is shredded and washed through a wash plant before it is processed through degassing and very fine filtration to produce high purity reprocessed resin.
r-LDPE yellow is a blown film grade and exhibits excellent processability and good balance of
toughness, strength and stretch properties. This grade is also be suitable for profile and sheet extrusion
Packing: 1000kg bulk bag
Melt flow rate (190�?C / 2.16kg) 0.5 �± 0.5
Density 0.92 �± 0.015
Measured on blown film of 25 �µm and BUR of 2.5 at external testing facility.
rLDPE Yellow is typically extruded at a melt temperature around 190Ã??C (min 180Ã??C, max 240Ã??C).
Mesh filters: 150 on the laser filter and 120 on the piston filters.
We have 200 tons of PVC Window Profile Regrind for Sale. We would like to make a strong scrap business partnership with the loyal PVC Window Profile Regrind buyers from all over the world.
Place of Origin : JAPAN, US, EUROPE
Materials : Polyvinyl Chloride [PVC]
Color : Mix Color
Application : Water Pipe, Window, Board, Contruction...
Grade : Extrusion K65-67
Type : Post Industrial Waste
Quality : Clean and less than 3% shortage
Form : Regrind
FOB Price : $300.00 - $500.00
Minimum Order : 25 Tons
Payment Term : T/T 50/50 and L/C 100% at sight
Estimate Lead Time : 15 - 20 days
Origin : Tokyo, Yokohama, Hamburg, New York, Long Beach
Supplying Capacity : 200 tons/month
Packaging : Jumbo Bag
Interested PVC Window Regrind buyers, please do reach us. We will be glad to offer you the best scrap material at a reasonable scrap price.
Specification: "rLDPE repro Yellow pellets from post-consumer & post-industrial films.
The material is shredded and washed through a wash plant before it is processed through degassing and very fine filtration to produce high purity reprocessed resin.
toughness, strength and stretch properties. This grade is also be suitable for profile and sheet
extrusion
Packing: 1000kg bulk bag
Melt flow rate (190�?C / 2.16kg) 0.5 � 0.5
Density 0.92 � 0.015
Measured on blown film of 25 �m and BUR of 2.5 at external testing facility.
rLDPE Yellow is typically extruded at a melt temperature around 190Ã??C (min 180Ã??C, max 240Ã??C).
Mesh filters: 150 on the laser filter and 120 on the piston filters."
Indonesia Wood Working Manufacturer Produce MERBAU & BANGKIRAI / YELLOW BALAU / ULIN / MERANTI / ACACIA
Products item : DECKING / FLOORING ****** S4S or E2E Molding finished *****
Anti slip redeed outdoor Decking or indoor flooring ****** 3 layers laminated Beam ****
Vary sizes by demand ******
Payment by BANK TRANSFER ONLY , No L/C accepted
We are Indonesia Wood Working Manufacturer and Sawn Timber supplier integrated with own sawmill and KD rooms ##
# We supply vary kind of wood species :
Red Meranti - Pine - Bangkirai - Rubberwood - Mahogany - Acacia - Albasia Falcata - Mix Hardwood
## Sizes by demand ##
Product items :
Sawn Timber , KD
S4S or E2E Plank ## Finger Jointed Sticks ## Pallets ## and its similar products ##
3 Layers laminated beam ****
Payment by Bank transfer only ## We do not accept L/C so please do not send any inquiry for L/C buyers
VOC REMOVAL BLOCK - Activated Carbon filters effectively Removes Volatile organic compounds (VOC) from water causing irritation in the eyes, nose, and throat, headaches, loss of coordination, and nausea. RO does not provide the adequate removal of VOCs. The adsorption properties of the activated carbon filter suit to remove the carbon-based VOC. No better defense mechanism against VOCs is offered than carbon as active carbon based on coconut shell is microporous and micropores can only house them suitably. To enhance the adsorption capacity of active carbon block we provide modified active carbon with nano alumina. These VOCs Blocks can be manufactured in different size for different applications.
Size & Diameter can be customised as per buyer's requirement.
