AV-14 AL, Wafer, Bare + Type of body: Wafer + Flange: JIS 5K/10K , ANSI 150, PN 10 + Material : _ Body : Aluminum Alloy Diecast (ADC-12) _ Disc : Stainless Steel (304, 316) _ Stem : Stainless Steel (304, 316) _ Seat : EPDM, NBR + Face to face dimension : _ ISO 5752, API 609, MSS SP-68, _ DIN 3203/K1 (short) + Top flange dimension : Bolt hole ISO 5211 + Light weight & compact + Max. Pressure : 10 kg/cm2 (0.98MPa) + Max. Temperature : EPDM (-20 c to +120 c) + Test : Body = 15 kg/cm2 (1.47MPa) / Seat = 11 kg/cm2 (1.08MPa) +OPTION - Long bonnet
AVE-14 AL, Electric + Type of body: Wafer + Flange : JIS 10K + Face to face dimension: ISO 5752 + Top flange dimension: Bolt hole ISO 5211 + Material : - Body : Aluminum Alloy Diecast (ADC-12) - Disc : Stainless Steel (304, 316) - Stem : Stainless Steel (304, 316) - Seat : EPDM, NBR + Max. Pressure : 10 kg/cm2 (0.98MPa) + Max. Temperature : - EPDM (-20 c to +120 c ) - NBR (-10 c to +80 c ) + Test : - Body = 15 kg/cm2 (1.47MPa) - Seat = 11 kg/cm2 (1.08MPa) + Light weight & compact +OPTION - Long bonnet - EXA : Explosionproof Eexd�BT4 (RE-010~050) - WTA : Watertight Enclosure (IP68) - PCU : Proportional Control Unit (in/out, 4~20mA, 0-10VDC) - PIU : Potentiometer (1K~10KΩ) - CPT : Current Position Transmitter (output 4~20mA) - DCM : 24VDC Motor (RE-006~050)
AV-13 Bare Type +Type of body: Wafer +Flange : JIS 5K/10K, ANSI 150, PN 6/10/16 (BS4504) +Max. Pressure: 10 kg/ cm2(0.98MPa) + Material : - Body : Cast Iron, Cast Steel, Ductile Iron, Stainless Steel - Disc : Stainless Steel, Aluminium Bronze - Stem : SS 410 - Seat : EPDM, NBR, PTFE + Max. Pressure : 10 kg/cm2(0.98MPa) + Max. Temperature : EPDM (-20 c to +120 c) NBR (-10 c to +80 c) + Test : Body = 15kg/cm2 (1.47MPa) / Seat = 11kg/cm2 (1.08MPa) + OPTION - Lug body - Flange body - Size : 14 in ~ 48 in - Coating disc (PFA, Viton)
The hydraulic enema/ sausage machine is the main equipment for processing intestinal products, which can fill all kinds of large, medium and small intestinal products. The machine is driven by piston type hydraulic pressure. Under the action of the hydraulic cylinder, the materials in the cylinder will be squeezed out after the pressure is generated by adjusting the working pressure. The upper part of the machine is equipped with a storage hopper and butterfly valve, which can realize continuous filling without lifting the cover and improve the working efficiency
The hydraulic enema/ sausage stuffer machine / sausage filler machine is the main equipment for processing intestinal products, which can fill all kinds of large, medium and small intestinal products. The machine is driven by piston type hydraulic pressure. Under the action of the hydraulic cylinder, the materials in the cylinder will be squeezed out after the pressure is generated by adjusting the working pressure. The upper part of the machine is equipped with a storage hopper and butterfly valve, which can realize continuous filling without lifting the cover and improve the working efficiency. Capacity 150-300kg , 1.5kw .
Couplings, gearbox, valves, pumps, bearings, conveyor systems, pipes & fittings, automation drives electrical items, rtd, cables, switchgears, transformers, measuring instruments, drilling machines. ball valves, gate valves, globe valves, butterfly valves, diaphragm valves, waffle valves, sluice valves, hydraulic valves, pneumatic valves, solenoid valves, bellow seal valves, check valves in stainless steel, ss 304, ss 316, brass, m.s, cast iron, cast steel, pvc, nylon, teflon, ceramic lining valves. fittings: flanges, elbows, tee, couplers, nipples. bearings, v belts, couplings: gear couplings, pin bush couplings,pulleys.Export, clearance, door delivery, import, automations, maintenance, retro fitting, installations
MATIREAL - CAST IRON / CAST STEEL / STAINLESS STEEL 304/316/316L / WCB BALL - STAINLESS STEEL 304 / 316//316L STEAM - STAINLESS STEEL 304/316 GLAND NUT - 304 / 316 STAINLESS STEEL SEAT - PTFE/CTFE/GTFE SIZE - 1/4 INCH TO 4 INCH
MATIREAL - CAST IRON / CAST STEEL / STAINLESS STEEL 304/316/316L / WCB BALL - STAINLESS STEEL 304 / 316//316L STEAM - STAINLESS STEEL 304/316 GLAND NUT - 304 / 316 STAINLESS STEEL STUD NUT - STAINLESS STEEL 304 SEAT - PTFE/CTFE/GTFE
MATERIAL - CAST IRON / CAST STEEL / WCB / STAINLESS STEEL 3O4/316/316L BALL - STAINLESS STEEL 304 / 316 STEAM - STAINLESS STEEL 304/316/ GLAND NUT - STAINLESS STEEL 304/316 LEVER - STAINLESS STEEL 304 SEAT - PTFE / CTFE / GTFE STUD NUT - STAINLEES STEEL 304
Ball valve , gate valve , butterfly valve , globe valve , and all type we also of industrial valve ..
Product : Valves Brand : Renaissance Pipe Fitting Inc. Sizes : Refer the specification Condition : New Rating : 4.6, based on 112 reviews price : Start from 5 USD RFP India is Indias wellknown manufacturer supplier and exporter of Valves which is a device that regulates directs or controls the flow of a fluid gases liquids fluidized solids or slurries by opening closing or partially obstructing various passageways Valves are technically valves fittings but are usually discussed as a separate category In an open valve fluid flows in a direction from higher pressure to lower pressure It is being made up from different materials like Stainless Steel Carbon Steel Alloy Steel Gun Metal Brass Bronze Forge Cast Iron Cast Steel and Mild Steel Meanwhile Valves are quite diverse and may be classified into a number of basic types such as Ball Valve Butterfly valve Ceramic Disc valve Check valve Choke Valve Diaphragm valve Gate valve Globe valve Knife Valve Needle Valve Pinch Valve Piston Valve Plug Valve and so on
Industrial Valve Like: Ball Valve, Gate Valve, Globe Valve, Check Valve, Butterfly Valve, Sluice Valve, Air Valve, Plug Valve as per Engineering Standard
Herbal tea ingredients, spices, herbs 1. chamomile fine cut 2. butterfly pea flower blue, 3. moringa 4. hibiscus c & s. 5. mint leaves c & s 6. lemongrass c & s. 7. jasmine 8. lemon, ginger 9. clove whole 10. anise seed 11. cassia alta 12. seena 13. lavender buds 14. holy basil 15. elderberry 16. schizandra berry. 17. cardamom 18. marigold petals 19. licorice 20. rose buds. 21. star anise whole or cracked. 22. orange peel c & s. 23. lemon peel c& s. 24. corn flower petals �¢?? blue..Bulk export, manufacturing, contract manufacturing, product sourcing, private label packaging, customized packaging
Gate Valves Wafer Valves Knife gate valves Non-return valves Pressure relief valves Actuators Positioners
MV-27 AL, Wafer, Lever + Type of Body: Wafer +Flange: JIS 10K, ANSI 150, PN10 +Material : -Body : Aluminium alloy diecast (ADC-12) -Disc : Stainless steel (304, 316) -Stem : Stainless steel (304, 316) -Seat Ring: EPDM, NBR - Max. Temperature : EPDM: -20 c to +120 c NBR : -10 c to +80 c - Max. Pressure : 10 kg/cm2 (0.98MPa) -Body Shell Test : 15 kg/cm2 (1.47MPa) -Seat Leak Test : 11 kg/cm2 (1.08MPa) - Operator : Lock Lever (1-1/4 in~6 in) Worm Gear (1-1/4 in~12 in) +OPTION - Long bonnet
We supply valves� for specialized fields such as Oil & Gas, Offshore, Petrochemical, Power, Marine and General Industry. Types are Ball Valves, Gate Valve, Globe Valve, Swing NRV Valve, 3 Way Valve, Butterfly Valve, Wafer Check Valve, Disc Check Valve and Customize Valves too are in scope of supply.
Ball Valves Screwed / Socket Weld / Butt-weld / Flanged Ends : Ball valves are designed and manufactured to provide maximum service life and dependability. Three Piece and Two Piece design Ball Valves ensure efficiency, reliability and economy. Pneumatic Operated Ball Valves and Electrical Actuated Ball Valves are maintenance friendly and suitable for on-line maintenance . Butterfly Valves High Performance Butterfly Valve 150LB/300LB/600LB ,wafer type with integrally moulded elastomeric body sleeve are designed for longer life and trouble free performance. Gate Valves ATSIPL distributes a full line of Gate Valves, including Wedge Gate Valves, Knife Gate Valves, Lined Gate Valves, Resilient Seated Gate Valves and more. Gate Valves are available from 1/2â?³ through 24â?³ and larger in various material options.
Aluminum Wire Scrap 99% We offer quality Aluminum Alloy Wheel Scrap at very cheap price which will suite our customers all around the world. Aluminum Alloy Wheel Scrap Grade: Aluminium Application: Scrap Alloy or not: Alloy Features: Free from Nuts, Steel plate, paint Material : 14 inch/ 15inch / 17inch / 18inch / Appearance: Silvery White Al content: >98% CONTACT US FOR MORE DETAILS AND QUOTATIONS.
AVE-13 Electric + Type of body: Wafer + Flange : JIS 10K + Max. Pressure : 10 kg/cm2 (0.98MPa) + Material : - Body : Cast Iron, Cast Steel, Ductile Iron, Stainless Steel - Disc : Stainless Steel, Aluminium Bronze - Stem : SS 410 - Seat : EPDM, NBR, PTFE, VITON +Max. Temperature : - EPDM (-20 c to +120 c) - NBR (-10 to +80) + Test : - Body = 15 kg/cm2 (1.47MPa) - Seat = 11 kg/cm2 (1.08MPa) +OPTION - Lug body - Flange body - Size : 14 in ~ 48 in - Coating disc (PFA, Viton) - EXA : Explosionproof Eexd�BT4 (RE-010~060) - WTA : Watertight Enclosure (IP68) - PCU : Proportional Control Unit (in/out, 4~20mA, 0-10VDC) - PIU : Potentiometer (1K~10KΩ) - CPT : Current Position Transmitter (output 4~20mA) - DCM : 24VDC Motor (RE-006~060)
Wafer and lug butterfly valves Manu.Std.:api609 Test and inspection:api598 End connection:wafer Side flanged std:asme b16.1 125/150psi Structure length:api609 Body:ci, di, carbon steel, stainless steel Disc:ci, ai-bronze, stainless steel, carbon steel Seat:epdm nbr ptfe Control actuator:handles, gear, electric and pneumatic Temperature range:-45-120 degrees. Vneer
