Borehole Pump Suppliers and Manufacturers

Product description Ganquan brand submersible borehole pump Model: qjt, qj, qjg series, 800 sizes in total. Flow rate: 5-600 m3/h (1.4-166.7l/s) Head: 6 600 m (19.7- 1968.5 feet) Well diameter: 150-400mm (5.9 -15.7 inch) Max. Rotate speed: 3000 r/min Pump size: 6-14 inch Operating limits: 1, maximum ambient temperature: 20 degree c 2, maximum immerging depth: 70m (229.6 feet). Motor: 1. Rewindable motor 2. Voltage: 380v 3. Frequency: 50hz 4. Max. Power: 250kw. Materials: cast iron, stainless steel Application: * applied to farm irrigation, water supply for inhabitant, industrial and mine enterprise, etc. Advantages: 1) the performance and efficiency of our qjt series pumps is better than qj series with national standard: with multi-impellers for one pump body, its single stage head is 1/3-1/2 times taller than that of qj and the efficiency is 1-3% higher than that of qj. 2) with perfect design and proper structure, it has the advantages of lower noise, longer service life, smaller volume, high efficiency, energy-saving, easy and convenient installation and maintenance, etc 3) greater weight for same bulk 4) completely meeting power standard by testing 5) long service life: normally 4-5 years.

Product description Ganquan brand submersible borehole pump Model: qjt, qj, qjg series, 800 sizes in total. Flow rate: 5-600 m3/h (1.4-166.7l/s) Head: 6 600 m (19.7- 1968.5 feet) Well diameter: 150-400mm (5.9 -15.7 inch) Max. Rotate speed: 3000 r/min Pump size: 6-14 inch Operating limits: 1, maximum ambient temperature: 20 degree c 2, maximum immerging depth: 70m (229.6 feet). Motor: 1. Rewindable motor 2. Voltage: 380v 3. Frequency: 50hz 4. Max. Power: 250kw. Materials: cast iron, stainless steel Application: * applied to farm irrigation, water supply for inhabitant, industrial and mine enterprise, etc. Advantages: 1) the performance and efficiency of our qjt series pumps is better than qj series with national standard: with multi-impellers for one pump body, its single stage head is 1/3-1/2 times taller than that of qj and the efficiency is 1-3% higher than that of qj. 2) with perfect design and proper structure, it has the advantages of lower noise, longer service life, smaller volume, high efficiency, energy-saving, easy and convenient installation and maintenance, etc 3) greater weight for same bulk 4) completely meeting power standard by testing 5) long service life: normally 4-5 years.

Submersible borehole pump (deep well water pump) Material is cast iron and stainless steel, tin bronze. They are important equipment for deep well water-lifting. Used to lifting water and drainage farmland irrigation, water supply projects, etc. It is also used sea water. Products include 6 large series and over 800 sizes. Size: 6 inch ~12 inch Flow rate: 5~600m3/h Lift: 6~600m Power 3~250kw. Wooden case.

The products are important water-lifting equipments in projects of geothermal development and utilization. They are heat-resistant, anti-corrosion and aging-resistant. Its operating water temperature is 120¡æ, and has passed national ministerial level certification. The case of the electric heat-resistant submersible motor is made from stainless steel and the tin bronze materials. Products include 6 large series and over 800 sizes. Geothermal submersible borehole electric pump honorably wins the prize of scientific and technological innovation. China important new products certificate Size: 6 inch ~12 inch Flow rate: 5~600m3/h Lift: 6~600m Power 3~250kw. Wooden case.

Model: 3ssw3-78-48-750 Flow: 1m3/h Head: 60m Voltage: dc 48v Power: 750ww Outlet dia/pump dia: 32mm/75mm Packing: packed by carton box -

Flow: 20m3/h Head: 130m Power: 15kw Material: cast iron Medium: clean water Outlet dia: 60mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue Deep well submersible water pump Overview: Filed with: water Flow range: 10—250m3/h; Head range:5—121m; Diameter scope:f30—f150mm; Temperature range: =30?. Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc. Deep well submersible water pump spare parts &features: Deep well submersible water pump motor and pump assembled into one. Deep well submersible water pump has simple structure, easy to use and maintenance. Electric motor is three-phase asynchronous motor. Safe and reliable operation, no pollution to water. Installation of deep well submersible water pump 1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%. 2. Motorcavity must be filled with water to cooling motor and lubricate bearings . 3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level. 4. The distance from the motor bottom to well bottom must be more than 3m. 5. Water temperature should be no more than 20°C. 6. Sand content of the water ( by mass) should be no more than 0.01%. 7. PH value of water 6.5-8.5. 8. Hydrogen sulfide content of the water should be no more than 1.5mg/L. 9. Chloride ion content of the water should be no more than 400mg/L. 10. Water yield of water source should ensure the requirements of pump continuous working.

Flow: 20m3/h Head: 104m Power: 11kw Material: cast iron Medium: clean water Outlet dia: 60mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue Deep well submersible water pump Overview: Filed with: water Flow range: 10—250m3/h; Head range:5—121m; Diameter scope:f30—f150mm; Temperature range: =30?. Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc. Deep well submersible water pump spare parts &features: Deep well submersible water pump motor and pump assembled into one. Deep well submersible water pump has simple structure, easy to use and maintenance. Electric motor is three-phase asynchronous motor. Safe and reliable operation, no pollution to water. Installation of deep well submersible water pump 1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%. 2. Motorcavity must be filled with water to cooling motor and lubricate bearings . 3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level. 4. The distance from the motor bottom to well bottom must be more than 3m. 5. Water temperature should be no more than 20°C. 6. Sand content of the water ( by mass) should be no more than 0.01%. 7. PH value of water 6.5-8.5. 8. Hydrogen sulfide content of the water should be no more than 1.5mg/L. 9. Chloride ion content of the water should be no more than 400mg/L. 10. Water yield of water source should ensure the requirements of pump continuous working.

Flow: 10m3/h Head: 225m Power: 13kw Material: cast iron Medium: clean water Outlet dia: 32mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage. Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province. The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence. Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.

Product description Ganquan brand submersible borehole pump Model: qjt, qj, qjg series, 800 sizes in total. Flow rate: 5-600 m3/h (1.4-166.7l/s) Head: 6 600 m (19.7- 1968.5 feet) Well diameter: 150-400mm (5.9 -15.7 inch) Max. Rotate speed: 3000 r/min Pump size: 6-14 inch Operating limits: 1, maximum ambient temperature: 20 degree c 2, maximum immerging depth: 70m (229.6 feet). Motor: 1. Rewindable motor 2. Voltage: 380v 3. Frequency: 50hz 4. Max. Power: 250kw. Materials: cast iron, stainless steel Application: * applied to farm irrigation, water supply for inhabitant, industrial and mine enterprise, etc. Advantages: 1) the performance and efficiency of our qjt series pumps is better than qj series with national standard: with multi-impellers for one pump body, its single stage head is 1/3-1/2 times taller than that of qj and the efficiency is 1-3% higher than that of qj. 2) with perfect design and proper structure, it has the advantages of lower noise, longer service life, smaller volume, high efficiency, energy-saving, easy and convenient installation and maintenance, etc 3) greater weight for same bulk 4) completely meeting power standard by testing 5) long service life: normally 4-5 years.

Description: Flow rate: 5-600 m3/h (1.4-166.7l/s) Head: 6 ¨c 600 m (19.7- 1968.5 feet) Well diameter: 150-400mm (5.9 -15.7 inch) Max. Rotate speed: 3000 r/min Pump size: 6¡±, 7¡±, 8¡±, 9¡±, 12¡± Operating limits: 1, maximum ambient temperature: 20 degree c 2, maximum immerging depth: 70m (229.6 feet) Motor: 1. Rewindable motor 2. Voltage: 380v 3. Frequency: 50hz 4. Max. Power: 250kw Materials: cast iron, stainless steel Application: * applied to farm irrigation, water supply for inhabitant, industrial and mine enterprise, etc. Advantages: 5) long service life: normally 6-7 years. In wooden box

Material is cast iron and stainless steel, tin bronze. They are important equipment for deep well water-lifting. Used to lifting water and drainage farmland irrigation, water supply projects, etc. It is also used sea water. Products include 6 large series and over 800 sizes. Size: 6 inch ~12 inch Flow rate: 5~600m3/h Lift: 6~600m Power 3~250kw. Wooden case.

-Pump Technical data: Qmax:4m3/h Capacity from 1.5 to 2.5(m3/h) Total head to 214 to 28m -Motor: Power:0.37 to 2.2kw(Single phase) Power:1.1 to 3.0kw(Three phase) Insulation class:B Protection class: IP58 Maximum diameter:ª+93mm Highest temperature of liquid:35íµ Operating conditions Maximum fluid temperature up to +35íµ . Maximum sand content: 0.25%. Maximum immersion :80m. Minimum well diameter :4".

“Sabar” 8"Submesible Pumpset - Water Filled are in Three Phase suitable for 8" & above bore well size. The Head range is between 8 Mtrs. to 326 Mtrs. & Discharge Range is between 250 LPM to 3000 LPM. Motor HP Range is from 7.5 HP to 60 HP. Pump Stage range is from 1 Stage to 16 Stage. The Salient Features of 8" Submersible Pumpset - Water Filled are as under : 1) Wet type, Water Cooled Rewindable Motors 2) Withstands wide voltage fluctuations 3) Most of the models have ISI marks 4) Available with Stainless Steel & bronze MOC 5) Long life due to study construction. The Applications of 8" Submersible Pumpset - Water Filled are as under : 1) Field Irrigation 2) Private / Public Water Supply 3) Flow / Drip / Sprinkler Irrigation 4) High Rise building water supply 5) Fire Fighting. Standard Export Wooden Box Packing.

“Sabar” 10"Submesible Pumpset - Water Filled are in Three Phase suitable for 10" & above bore well size. The Head range is from 4 Mtrs. to 264 Mtrs. & Discharge Range is from 50 LPM to 4000 LPM. Motor HP Range is from 15 HP to 125 HP. Pump Stage range is from 1 Stage to 13 Stages. The Salient Features of 10" Submersible Pumpset - Water Filled are as under : 1) Wet type, Water Cooled Rewindable Motors 2) Withstands wide voltage fluctuations 3) Most of the models have ISI marks 4) Available with Stainless Steel & bronze MOC 5) Long life due to study construction. The Applications of 10" Submersible Pumpset - Water Filled are as under : 1) Field Irrigation 2) Private / Public Water Supply 3) Fow / Drip / Sprinkler Irrigation 4) High Rise building water supply 5) Fire Fighting. Standard Export Wooden Box Packing.

“SABAR" 6" Submersible Pumpset - Water Filled are in Three Phase suitable for 6" & Above Borewell Size. It's Head Range is from 7 Mtrs. to 271 Mtrs., Discharge Range is from 40 LPM to 1250 LPM, Motor HP Range is from 3 HP to 30 HP & Pump's Stage Range is from 2 Stages to 30 Stages. The Salient Features for "SABAR" 6" Submersible Pumpset - Water Filled are as under : 1) Wet type, water cooled rewindable motors 2) Withstands wide voltage fluctuations 3) Most of models are having ISI Marks 4) Availbale with Stainless Steel & Bronze Material of Construction 5) Long life due to Sturdy construction. The Applications for "SABAR" 6" Submersible Pumpset - Water Filled are as under : 1) Field Irrigation 2) Private / Public Water Supply 3) Flow / Drip / Sprinkler Irrigation 4) High rise building & Fire Fighting. Standard Export Wooden Box Packing.