Single Fiber Bidirectional EDFA Amplifier models include a Red and a blue port designed for single fiber DWDM Solution. The design of these models is used for single-fiber DWDM transmission systems. C-band optical signal overall amplification Covering the wavelength range of 1528 ~ 1561nm Support systems to achieve different cross-section radio repeater transmission Operating wavelength range: Blue: 1528nm~1543nm Red: 1547nm~1561nm Low noise figure: typ 5dB Excellent gain flatness Multiple operating modes: AGC adjustable Gain APC output is adjustable ACC voltage adjustable Mid-stage access for DCM or OADM Offset the insertion loss introduced by DCM Reduce the additional degradation of system OSNR Flexible insertion of DCMs at different distances Optional OSC channel for remote management MON port, on-line monitoring optical power and OSNR Single fiber bidirectional EDFA amplifier include an Red and blue port, Red optical amplifier include an blue out port and blue in port, Red optical amplifier Amplify red optical signal, blue out port and blue in port are used to access the amplifier to amplify the blue optical signal. Blue optical amplifier include an red out port and red in port, Blue optical amplifier Amplify blue optical signal, red out port and red in port are used to access the amplifier to amplify the red optical signal, Blue: 1528nm~1543nm. Red: 1547nm~1561nm.
We make customized rolling, sliding gates, collapsible gates for home, commercial building factories etc. These gates come in Aluminum, Stainless Steel or in Steel. The surface is powder coated to last many years after installation. These gates can be installed on tracks or without tracks. Every aspect of the gates can be customized. These gates are easy to operate with minimal effort. Our standard dimensions Height 1600mm (height can customized) Stretching ratio: 1:0.17 + 0.42 (can be customized) Gate Minimum length :2 Meters Gate Maximum length: upto 90 meters ( double Gates) Operation: Hand operated, Motorized. Colors available: Blue, Red (colors can be customized) Please contact us for competitive pricing.
EDFA Optical Amplifier module provide multi-function, low noise, Erbium-Doped Fiber Amplifier (EDFA) solutions, The amplifier module can be operated at constant gain (Automatic Gain Control AGC), constant output power (Automatic Power Control, APC). Integrated VOA can be automatically adjusted to achieve smooth gain spectrum. It can amplify the C-Band signal with or w/o middle stage access (MSA), which brings great flexibility for the network application. FUNCTIONï¼? C-band optical signal overall amplification Covering the wavelength range of 1528 ~ 1565nm Support systems to achieve different cross-section radio repeater transmission HIGHTLIGHT: Wide operating wavelength range:1528nm~1565nm Three Optical Amplifier C-Band applications: Booster , In-line, Pre-amplifier Low noise figure: typical: 5dB Excellent gain flatness Multiple operating modes: AGC adjustable Gain APC output is adjustable ACC voltage adjustable Mid-stage access for DCM or OADM Optional OSC channel for remote management MON port, on-line monitoring optical power and OSNR Many model options serve all the traditional amplifier applications in an extended optical link: booster, in-line, and pre-amplifier. A booster amplifier operates at the transmission side of the link. It features high input power, high output power, and medium optical Gain . Boosters are designed to amplify aggregated optical input power for reach extension. An in-line amplifier operates in the middle of an optical link. It features medium to low input power, high output power, high optical Gain , and a low noise figure. In-line amplifiers are designed for optical amplification between two network nodes on the main optical link. A Pre-amplifier operates at the receiving end of an optical link. It features medium to low input power, medium output power, and medium Gain. Pre-amplifiers are designed for optical amplification to compensate for losses in a demultiplexer located near the optical receiver. Some EDFA Models include an additional mid-stage port designed for insertion of a Dispersion Compensation Management (DCM) unit without its inherent insertion loss. The design of these models maximizes the DCM benefits to increase deployment flexibility. New placement options require fewer amplifiers in the link, and they can open the door to applications that were not possible with older technology.
EDFA Optical Amplifier 1U Rack EDFA is the erbium-doped fiber amplification board. Its main function is to compensate the power of the signal optical in the transmission line, and it can amplify the optical signals of up to 48 channels with 100 GHZs interval) or 96 channels with 50 GHZ s interval) at C band at the same time. It has characters of flat gain, locked gain, low noise index, etc. It's an indispensable and important component for DWDM system, future high speed system and all-optical network long-distance transmission.
EDFA optical amplifier module provide multi-function, low noise, Erbium-Doped Fiber Amplifier (EDFA) solutions, The amplifier module can be operated at constant gain (Automatic Gain Control AGC), constant output power (Automatic Power Control, APC). This is a highly integrated EDFA, and the large module supports Dual amplifier with two independent gain units . Wide operating wavelength range:1528nm~1565nm Dual amplifier contains two independent gain units Low noise figure: typ 5dB Excellent gain flatness Multiple operating modes: AGC adjustable Gain APC output is adjustable Optional OSC channel for remote management MON port, on-line monitoring optical power and OSNR
EDFA optical amplifier module provide multi-function, low noise, Erbium-Doped Fiber Amplifier (EDFA) solutions, The amplifier module can be operated at constant gain (Automatic Gain Control AGC), constant output power (Automatic Power Control, APC). This is a highly integrated EDFA, and the large module supports Dual amplifier with two independent gain units . Wide operating wavelength range:1528nm~1565nm Dual amplifier contains two independent gain units Low noise figure: typ 5dB Excellent gain flatness Multiple operating modes: AGC adjustable Gain APC output is adjustable Optional OSC channel for remote management MON port, on-line monitoring optical power and OSNR
With the application of long-distance systems becoming more and more extensive, our company's self-developed middle stage access (MSA) EDFA, middle stage access (MSA) EDFA can effectively solve the insertion loss caused by DCM and OADM, offset the DCM and OADM bands. The resulting insertion loss reduces the additional degradation of the system OSNR. C-band optical signal overall amplification Covering the wavelength range of 1528 ~ 1565nm Support systems to achieve different cross-section radio repeater transmission Wide operating wavelength range:1528nm~1565nm Low noise figure: typ 5dB Excellent gain flatness Multiple operating modes: AGC adjustable Gain APC output is adjustable ACC voltage adjustable Mid-stage access for DCM or OADM Offset the insertion loss introduced by DCM Reduce the additional degradation of system OSNR Optional OSC channel for remote management MON port, on-line monitoring optical power and OSNR Middle stage access (MSA) EDFA models include an additional mid-stage port designed for insertion of a Dispersion Compensation Management (DCM) unit without its inherent insertion loss. The design of these models maximizes the DCM benefits to increase deployment flexibility.New placement options require fewer amplifiers in the link, and they can open the door to applications that were not possible with older technology.
Erbium-Doped Fiber Amplifier (EDFA) is an optical amplifier used in the C-band and L-band, where the loss of telecom optical fibers becomes lowest in the entire optical telecommunication wavelength bands. Invented in 1987, EDFA is now most commonly used to compensate for the loss of an optical fiber in long-distance optical communication. Another important characteristic is that EDFA can amplify multiple optical signals simultaneously, and thus can be easily combined with WDM technology. Types of EDFA Amplifier 01-1U EDFA Equipment 1U EDFA Equipment has a high stability output power EDFA. The stability Pump Laser and unique ATC(automatic temperature control) and AGC (automatic gain control) circuit are employed in it as the key components to ensure the high stability and reliability of output power. 02-DWDM EDFA Card The multi-channel erbium-doped fiber amplifier(EDFA) features stable output power, low noise, and power consumption. The components of the product are a high-availability pump laser and high-performance gain flattening filters. 03-DWDM EDFA Card with VOA DWDM EDFA Card with VOA input and output signals are sampled and monitored with a feedback circuit. AGC (Automatic Gain Control) circuit is designed into the amplifier to ensure high output power stability and reliability.
The Jalapeno is variously named in Mexico as huachinango and chile gordo. The cuaresmeno closely resembles the Jalapeno. The seeds of a cuaresmeno have the heat of a Jalapeno, but the flesh has a mild flavor close to a green bell pepper. As of 1999, 5,500 acres (22 km2) in the United States were dedicated to the cultivation of Jalapeno s. Most Jalapeno s are produced in southern New Mexico and western Texas. Jalapeno s are a pod type of Capsicum. The growing period is 70–80 days. When mature, the plant stands two and a half to three feet tall. Typically a plant produces twenty-five to thirty-five pods. During a growing period, a plant will be picked multiple times. As the growing season ends, Jalapeno s start to turn red. Once picked, individual peppers ripen to red of their own accord. The peppers can be eaten green or red. Jalapenos have 2,500 - 8,000 Scoville heat units. Compared to other chillies, the Jalapeno has a heat level that varies from mild to hot depending on cultivation and preparation. The heat, caused by capsaicin and related compounds, is concentrated in the veins (placenta) surrounding the seeds, which are called picante. Handling fresh Jalapeno s may cause skin irritation. Some handlers wear latex or vinyl gloves while cutting, skinning, or seeding Jalapeno s. When preparing Jalapeno s, hands should not come in contact with the eyes as this leads to burning and redness. Jalapeno is of Nahuatl and Spanish origin. The Spanish suffix -eno signifies that the noun originates in the place modified by the suffix, similar to the English - (i) an. The Jalapeno is named after the Mexican town of Xalapa (also spelled Jalapa). Xalapa is itself of Nahuatl derivation, formed from roots xal-li "sand" and a-pan "water place." A Jalapeno plant with pods. The purple strips on the stem are anthocyanin, due to the growth under blue-green spectrum fluorescent lighting. Five Jalapeno peppers. - A chipotle is a smoked, ripe Jalapeno. - Jalapeno jelly can be prepared using jellying methods. - Jalapeno peppers are often muddled and served in mixed drinks. - Texas Toothpicks are Jalapeno s and onions shaved into straws, lightly breaded, and deep fried. - Jalapeno Poppers, also called Armadillo eggs, are an appetizer; Jalapeno s are stuffed with cheese, usually cheddar or cream cheese, breaded and deep fried.
Dehydrated fruits & vegetables, ceylon spices , king coconut water , coconut based products, blue butterfly pea tea, ginger tea, lemon tea, cassava, pumpkin, ginger, green chilli, black pepper, red chilli, curry leaves, black pepper, cardamom.
Casablanca Deodorant Antiperspirant Roll On. Available variant Homme Dynamic (Black), Homme Ambitious (Blue), Homme Intense (Red), Homme Prestige (Silver), Femme Eternity (Gold), Femme Romantic (Pink), Femme Classic (Violet), Femme Pure (White). Packaging 6x12x50ml. Product is Manufactured by PT. Priskila Prima Makmur.