Bitumen penetration grade 60/70 Bitumen penetration grade 80/100 200kgs per metal drum Flexi-tank Bulk in tanker
BITUMEN 60/70 - BITUMEN 80/100 Drum and Jumbo packing is available . include international inspection .
Bitumen Penetration Grade 60/70 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. ... Penetration Grade bitumens are specified by the penetration and softening point test.
Bitumen Penetration Grade 60/70 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. Penetration Grade bitumens are specified by the penetration and softening point test. * SGC available * Delivery Terms: FOB Bandar Abbas or EXW * Payment: 30% prepayment and 70% against the copy of B/L
Bitumen 60/70 Bitumen 80/100 Packing in Drum, Jumbo Bags, Bulk Minimum Order: 3000 Matric Tons
Asphalt bitumen is mainly used as basic construction materials, raw materials and fuels, and its application scope is such as transportation (road, railway, aviation, etc.), construction industry, agriculture, water conservancy engineering, industry (mining industry, manufacturing industry), civil and other departments.
Bitumen 60/70 Test method Unit Specification Specific gravity @ 25°C ASTM D70 Kg/cm3 1.01/1.06 Penetration @ 25°C ASTM D5 mm/10 60/70 Softening point °C ASTM D36 °C 49/56 Ductility @25 °C ASTM D113 cm 100 min Loss on heating(wt) % ASTM D6 wt % 0.2 max Drop in penetration after heating % ASTM D5-D6 % 20 max Flashpoint °C ASTM D92 °C 232 min Solubility in Trichloroethylene ASTM D2042 wt % 99 min Spot test A.A.S.H.O.T102 Negative
Bitumen 60/70 in Old Barrels Description Bitumen 60-70 is high quality penetration grade asphalt derived from crude petroleum reefing. It is dark in colour and possesses waterproofing and adhesive properties. It is substantially non-volatile and softens gradually when heated. Uses Bitumen 60 û 70 is used as a binder of mineral aggregates in asphalt concrete and hot laid plant mix for highways, airports, parking areas, driveways and curbs. Technical data Test test method results Penetration @ 25¦c, 100gm, 5sec. 1/10mm astmd-5 60.0-70.0 Softening point by ring and ball method ¦c astmd-36 (min) 48.0 Ductility @ 25 ¦c cm astmd-113 (min) 100.0 Flash point (Cleveland open cup) ¦c astmd-92 (min) 300.0 Viscosity kinematic @ 135 ¦c cst astmd2170 (min) 350.0 Solubility in trichloroethylene %mass astmd-2042 (min) 99.5 ôThin film oven test. (3.2mm).@163¦c.5hrs: astmd1754 Loss on heating %mass (max) 1.0 Penetration of residue % of original ( min ) 52.0 Ductility of residue (@25 ¦c . 5 cm/min) cm ( min ) 50.0 Available quantity 5000 mt monthly Backing Bitumen 60-70 In Old drums. Time of delivery : 45 days for barrel Delivery : any port all over the world. Payment method * by cash * Issuance confirmed letter of credit at sight Irrevocable transferable Expiry date will be 3 month from date of issuance the letter of credit place Egypt Docs Required * Original invoice * Full set of bill of lading. * Certificate of Egyptian origin * Packing list * Weight list * SGS or any inspection co.. Instruction * 100 % payment letter of credit at sight. * Bill of lading showing not clean on board is acceptable * Bill of lading showing additional cost is acceptable * Bill of lading showing name of issuing bank in two fields (consignee and notifying) is acceptable * Freight forwarder bill of lading is acceptable * Late presentation or stale docs. Are acceptable * Presentation period 21 days * Third part docs. Acceptable * comm. Of the applicant bank will be paid from the applicant and comm. Of negotiation bank will be paid from the benef.. * Our bank swift code nbegegcx * Language or spelling mistakes are acceptable.
Bitumen 60/70, Bitumen 80/100.Exporting
Origin: Kazakhstan MOQ: 50,000 MT x 12 mths Max Qty: 500,000 MT/mth
Bitumen produced by refineries in the Russian Federation, Kazakhstan, and elsewhere, is available for sale FOB or CIF at the best prices. Prices are negotiable for serious big-volume buyers. Buyer's mandate welcome. 30/40 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 40/50 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 50/70 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 60/70 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 80/100 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 85/100 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 100/120 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT
Bitumen Penetration Grade 80/100 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by ASI GLOBAL TRADE is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by ASI GLOBAL TRADE is produced from vacuum residue (short residue) feedstock. Penetration Grade bitumens are specified by the penetration and softening point test. Designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen. SPECIFICATIONS : CHARACTERISTIC TEST METHOD UNIT MIN. MAX. Specific gravity at 25°C ASTM D70 °C 1.01 1.05 Penetration at 25°C ASTM D5 mm 80 100 Softening Point ASTM D36 °C 42 52 Ductility at 25°C ASTM D113 Cm 100 - Loss on heating ASTM D6 % 0,5 Flash Point ASTM D92 °C 225 Solubility in Trychloroethyelene ASTM D2042 % 99 Performance after RTFOT Method Test to ASTN D1754: - Change in mass (m/m) ASTM2872 % - 0.5 - Retained Penetration 25°C, 100g, 5s (% of original) ASTM D5 % 50 - - Increase in softening point ASTM D36 °C - â?¤8 - Softening point after hardening ASTM D36 °C 45 - LEGAL NOTES The information, and, in particular, the recommendations relating to the application and end-use of ASI GLOBAL TRADE products, are given in good faith based on ASI GLOBAL TRADE current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with ASI GLOBL TRADE recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchant-ability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the products suitability for the intended application and purpose. ASI GLOBAL TRADE reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.
Maximum : 100,000 MT/Month
Bitumen All grade Bitumen 60/70 Bitumen 80/100 Bitumen 40/50 Bitumen MC30 Urea Sulphur
BITUMEN 80/100 TECHNICAL DATA: SAMPLE NO. SPECIFICATION Penetraction Grade MIN. MAX Penetraction 25 ¦c (100g.5s)0.1mm 80 100 Penetration (AFTER RTFOT )% of original pen 50 Softening Point (Ring and Ball ) ¦c (NEAT) 45 52 Softening Point (R & B) after loss on heating (5hrs 163 ¦c) ¦c Softening Point (AFTER RTFOT ) ¦c 45 Flashpoint (Cleveland Open Cup ) ¦c 225 Viscosity at 135¦c (VIRGIN ) cst Viscosity at 135¦c(AFTER RTFOT) cst CHANGE 300% Ductility at 25¦c cm 100 Ductility at 25¦c (AFTER rtfot)cm 75 Specific gravity at 25¦c g/cc 1.00 1.05 Thin Film Oven Test (TFOT) (5hrs at 163¦c)% 0.5 Solubility in Trichloroethylene % 99 Loss on heating (5hrs.163¦c) % max. 0.5 Penetration on residue(100g -5s)% of initial Pen Min. 80
Bitumen 40/50, bitumen 60/70, bitumen 80/100.
Bitumen a black viscous mixture of hydrocarbons obtained naturally or as a residue from petroleum distillation. It is used for road surfacing and roofing. Bitumen is a mixture of Organic Liquids that are highly Viscous, Black, Sticky, Entirely Soluble in Carbon Disulfide, and composed primarily of highly condensed Polycyclic Aromatic Hydrocarbons. Naturally occurring or crude bitumen is a sticky, tar-like form of petroleum which is so thick and heavy that it must be heated or diluted before it will flow. At room temperature, it is much like cold molasses. Refined Bitumen is the residual (bottom) fraction obtained by fractional distillation of crude oil. It is the heaviest fraction and the one with the highest boiling point, boiling at 525 C (977 F). Petroalliance are involved in import and the supply and trade of Bitumen Oil. This oil is a dark and viscous liquid which is sticky in texture. It is widely used in road construction, waterproofing, paints, enamels etc. It is available to clients in different types of settings at highly affordable prices. It is widely acclaimed amongst our client base for its supreme quality. Uses of Bitumens Bitumen is primarily used for construction and paving of roads. Its other uses are for Bituminous Waterproofing Products, including the use of bitumen in the production of roofing felt and for sealing flat roofs.
Bitumen penetration grade 60/70 is semi-hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair conjointly for the production of asphalt pavements with below technical specifications. This grade of bitumen is mainly used in the manufacture of hot combine asphalt for bases and wearing courses. Bitumen 60/70 is the most used bitumen grade and basic material for all alternative bituminous products. Bitumen Penetration Grade 60/70 is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by RAHA GROUP is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by RAHA GROUP is produced from vacuum residue (short residue) feedstock. RAHA Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.
Penetration Bitumen 60/70 serves as a vital component in road construction projects. It is specifically engineered for optimal performance in such applications. It is imperative to adhere to the recommended usage guidelines and consult with the supplier before considering alternative applications. The properties and specifications of Bitumen 60/70 are rigorously tested to ensure compliance with industry standards and project requirements.
Bitumen 80/100 is widely recognized as one of the preferred bitumen grades for various industrial applications, including road construction and other projects. The product's specifications are meticulously documented and certified by reputable entities such as SGS or other third-party inspection companies. This ensures that the quality and performance of Bitumen 85/100 meet stringent industry standards, guaranteeing reliability and efficacy in diverse applications.
