Bitumen a black viscous mixture of hydrocarbons obtained naturally or as a residue from petroleum distillation. It is used for road surfacing and roofing. Bitumen is a mixture of Organic Liquids that are highly Viscous, Black, Sticky, Entirely Soluble in Carbon Disulfide, and composed primarily of highly condensed Polycyclic Aromatic Hydrocarbons. Naturally occurring or crude bitumen is a sticky, tar-like form of petroleum which is so thick and heavy that it must be heated or diluted before it will flow. At room temperature, it is much like cold molasses. Refined Bitumen is the residual (bottom) fraction obtained by fractional distillation of crude oil. It is the heaviest fraction and the one with the highest boiling point, boiling at 525 C (977 F). Petroalliance are involved in import and the supply and trade of Bitumen Oil. This oil is a dark and viscous liquid which is sticky in texture. It is widely used in road construction, waterproofing, paints, enamels etc. It is available to clients in different types of settings at highly affordable prices. It is widely acclaimed amongst our client base for its supreme quality. Uses of Bitumens Bitumen is primarily used for construction and paving of roads. Its other uses are for Bituminous Waterproofing Products, including the use of bitumen in the production of roofing felt and for sealing flat roofs.
Bitumen penetration grade 60/70 is semi-hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair conjointly for the production of asphalt pavements with below technical specifications. This grade of bitumen is mainly used in the manufacture of hot combine asphalt for bases and wearing courses. Bitumen 60/70 is the most used bitumen grade and basic material for all alternative bituminous products. Bitumen Penetration Grade 60/70 is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by RAHA GROUP is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by RAHA GROUP is produced from vacuum residue (short residue) feedstock. RAHA Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.
Penetration Bitumen 60/70 serves as a vital component in road construction projects. It is specifically engineered for optimal performance in such applications. It is imperative to adhere to the recommended usage guidelines and consult with the supplier before considering alternative applications. The properties and specifications of Bitumen 60/70 are rigorously tested to ensure compliance with industry standards and project requirements.
Technical Data Sheet Bitumen 60/70 Paving Grade Bitumen Description Bitumen 60/70 has the highest-boiling point, heaviest and most polar fraction from the vacuum distillation of crude oil. Bitumen 60 70 is composed of asphaltene and maltene. The heavy insoluble asphaltene molecules give bitumen 60/70 its body and softening point while the maltenes are oily and make asphalt flexible. Asphalting molecules are soluble in aromatic solvents like toluene but insoluble in heptane. The maltenes are heptane-soluble molecules and less aromatic. Applications Bitumen 60/70 is a high-quality penetration grade bitumen used in road construction and other similar applications. Bitumen penetration grade 60/70 is semi hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical specification. This grade of bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Bitumen 60/70 is most used bitumen grade and basic material for all other bituminous products. Typical Specification ITEM SPECIFICATION TEST METHOD SPECIFIC GRAVITY @ 25/25 oC 1.01/1.06 D-70 PENETRATION @ 25 oC 60/70 D-5 SOFTENING POINT oC 49/56 D-36 DUCTILITY @ 25 oC SMC 100 MIN D-13 LOSS ON HEATING %WT 0.2 MAX D-6 DROP IN PENETRATION AFTER HEATING % 20 MAX D-6 & D-5 FLASH POINT oC 250 MIN D-92 SOLUBILITY IN CS2 %WT 99.5 MIN D-4 ORGANIC MATER INSOLUBLE IN CS 0.2 MAX D-4 SPOT TEST NEGATIVE *A.A.S.H.O.T 102 Packing: Bulk shipment, 150kgs, 180kgs, 200kgs new steel drum. 25kgs, 50kgs, 300kgs, 500kgs, 1000kgs Polybag.
A product Bitumen 60/70 is available In any quantity Required documents before completing the transaction : trade license
We supply Bitumen in Bulk Vessel, Jumbo Bag, Barrel packing.
Asphalt bitumen is mainly used as basic construction materials, raw materials and fuels, and its application scope is such as transportation (road, railway, aviation, etc.), construction industry, agriculture, water conservancy engineering, industry (mining industry, manufacturing industry), civil and other departments.
BITUMEN GRADE60/70 PRICE CIF ASWP: GROSS $390/NET $380 TERMS OF NEGOTIATION ORIGIN: FEDERAL REPUBLIC OF NIGERIA INCOTERMS: CIF/FOB/TTO LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT TERMS: SBLC-MT760, MT103 PERFORMANCE BOND: 2% PB CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS) INSPECTION: SGS, CIQ OR SIMILAR COMMISSION: STRUCTURED NCNDA/IMFPA FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION) 1. Buyer sends ICPO in line with seller working procedures 2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity. 3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days. 4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: - SGS report, Pre- Injection Report, Commitment Letter to Supply Authorization to sell & collect. 5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel. 6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value 7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction. 8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
Bitumen 60/70 Grade: Specification test method Specific gravity @25/25 c 1.01-1.06 d-70 Penetration @25 c 60/70 d-5 Softening point c 49/56 d-36 Ductility @25 c 100 min d-113 Loss on heating (wt)% 0.2 max d-6 Drop in penetration after heating % 20 max d-6 & d-5 Flash point c 250min d-92 Solubility in cs2 (wt)% 99.5 min d-4 Spot test negative *a.A.S.H.O.T.102
Bitumen grade 70/60 is a grade of standard penetrating bitumen and is one of the most widely used bitumen types in the world. This type of bitumen is used as a material for paving roads. This exported bitumen is known as medium-grade bitumen for road construction and asphalt pavement production with superior properties and is used for construction projects. This grade of bitumen is mainly used in making hot asphalt as a mixture of bitumen and stone materials. The degree of bitumen 70/60 is determined by the penetration test and softening in a certain period of time. As you have noticed, the penetration degree is determined by the penetration test. Only performance parameters such as adhesion, rheology, durability and tolerance of a certain temperature can determine bitumen grading.
Bitumen 60/70 Test method Unit Specification Specific gravity @ 25°C ASTM D70 Kg/cm3 1.01/1.06 Penetration @ 25°C ASTM D5 mm/10 60/70 Softening point °C ASTM D36 °C 49/56 Ductility @25 °C ASTM D113 cm 100 min Loss on heating(wt) % ASTM D6 wt % 0.2 max Drop in penetration after heating % ASTM D5-D6 % 20 max Flashpoint °C ASTM D92 °C 232 min Solubility in Trichloroethylene ASTM D2042 wt % 99 min Spot test A.A.S.H.O.T102 Negative
The quality of bitumen 60/70 depends on its physical properties and specifications. Apart from penetration test, there are a number of test that are used for specifying bitumen 60/70 including viscosity, softening point, ductility, loss on heating, and flash point. Some of these items are more important for suppliers of bitumen 60/60 and their customers. These are softening point and flashpoint. According to ASTM D36 method, the softening point of bitumen 60/70 is between 49 to 56 �°C and the flash point of bitumen 60/70 is 250 �°C. Note : Cross stuffing charged & SBL charges extra
FOB UAE in drums, prompt delivery for Bitumen available.
Bitumen 60/70
ORIGIN: RUSSIAN ORIGIN Minimum Quantity Order: 100,000 MT Per Month Maximum quantity Order: 200,000 MT Per Month Contract Period: 12 Months, A single shipment on spot basis is allowed Loading: Vladivostok, Novorossisyk Or Any Russian PORT/Safe Port Worldwide
Asia Bitumen would be producer of high quality Bitumen 60/70 for your reference we have our own Factory and would be able to produce big quantities of Bitumen 60/70 for exporting to other countries. for more details please have visit from Asia Bitumen website.
COMMODITY: BITUMEN GRADE: 60/70 MIN QUANTITY: 500 METRIC TONS PER MONTH SUPPLY ABILITY: 3,000 MT (+_10%) PER MONTH PACKING: 185 KGS (+-3%) NEW STEEL DRUMS COUNTRY OF ORIGIN: GULF TERMS: FOB / CIF INSPECTION: GEO CHEM MIDDLE EAST / SIMILAR
Bitumen 60/70 Test method Unit Specification Specific gravity @ 25°C ASTM D70 Kg/cm3 1.01/1.06 Penetration @ 25°C ASTM D5 mm/10 60/70 Softening point °C ASTM D36 °C 49/56 Ductility @25 °C ASTM D113 cm 100 min Loss on heating(wt) % ASTM D6 wt % 0.2 max Drop in penetration after heating % ASTM D5-D6 % 20 max Flashpoint °C ASTM D92 °C 232 min Solubility in Trichloroethylene ASTM D2042 wt % 99 min Spot test A.A.S.H.O.T102 Negative
bitumen 60/70 Bitumen is a thermoplastic material and its stiffness is dependent on temperature. The temperature-vs-stiffness relationship of bitumen is dependent on the source of crude oil and the method of refining. 25kg