Bespoke Rfid Contactless Nfc Card Manufacturer Suppliers and Manufacturers

RFID is short for Radio Frequency Identification. RFID, is the generic term for digital technologies that apply radio waves to automatically identify people or objects. Applications of RFID Cards are distributed in identification, access control, supply chain, inventory tracking, vehicle fees, security, producing control, and asset management, especially on pets. Passive RFID Cards can operate in the low frequency (LF), high frequency (HF) and ultra-high frequency (UHF) radio bands. These three frequencies are ok for us. RFID Cards have adequate security. Because RFID carries the electronic information, and the content of data vias a password to protect, so that its contents can not easily be forged and altered. We have invested in the latest printing techniques for RFID Cards to meet our cu stomersâ?? expectations of quality, flexibility and speed of service, and offer the full range of in-house print solutions from design to mailing and fulfillment. Chip Type EEPROM Protocol Frequency Operating Temperature Endurance Data Rentenion Dimension (mm) Legic MIM 256 256 Bytes ISO 15693 13.56Mhz -20â??ï½?55â?? >100,000 10 Years 85.6x54x0.82 or Custom Mifare 1K S50 1K Bytes ISO 14443A 13.56Mhz -20â??ï½?55â?? >100,000 10 Years 85.6x54x0.82 or Custom Mifare 4K S70 4K Bytes ISO 14443A 13.56Mhz -20â??ï½?55â?? >100,000 10 Years 85.6x54x0.82 or Custom Mifare Ultralight 64 Bytes ISO 14443A 13.56Mhz -20â??ï½?55â?? >100,000 10 Years 85.6x54x0.60 Mifare Ultralight C 192 Bytes ISO 14443A 13.56Mhz -20â??ï½?55â?? >10,000 10 Years 85.6x54x0.60 I Code Sli 1024 Bit ISO 15693 13.56Mhz -20â??ï½?55â?? >100,000 10 Years 85.6x54x0.82 or Custom Mifare DESFire 2K 2 K bytes ISO 14443A 13.56Mhz -20â??ï½?55â?? >100,000 5 Years 85.6x54x0.82 or Custom Mifare DESFire 4K 4K bytes ISO 14443A 13.56Mhz -20â??ï½?55â?? >100,000 5 Years 85.6x54x0.82 or Custom Mifare DESFire 8K 8K bytes ISO 14443A 13.56Mhz -20â??ï½?55â?? >100,000 5 Years 85.6x54x0.82 or Custom Fudan M1 1 K Byte ISO 14443A 13.56Mhz -20â??ï½?55â?? >100,000 10 Years 85.6x54x0.82 or Custom Compatible S70 4K Bytes ISO 14443A 13.56Mhz -20â??ï½?55â?? >100,000 10 Years 85.6x54x0.82 or Custom T5567-T5577 330 Bits ISO 7816 125KHZ -20â??ï½?55â?? >100,000 10 Years 85.6x54x0.82 or Custom Compatible T5577 1024 Bits ISO 7816 125KHZ -20â??ï½?55â?? >100,000 10 Years 85.6x54x0.82 or Custom TK4100 64 Bits ISO 7815 125KHZ -40â??ï½?85â?? >100,000 10 Years 85.6x54x0.82 or Custom EM4100-EM4102 64 Bits ISO 7815 125KHZ -40â??ï½?85â?? >100,000 10 Years 85.6x54x0.82 or Custom EM4200 128 Bits ISO 11785 125KHZ -40â??ï½?85â?? >100,000 10 Years 85.6x54x0.82 or Custom EM4305 512 Bits ISO 11785 125KHZ -40â??ï½?85â?? >100,000 10 Years 85.6x54x0.82 or Custom EM4450 1K Bit ISO 11785 125KHZ -40â??ï½?85â?? >100,000 10 Years 85.6x54x0.82 or Custom HID Proximity 360 Bits ISO 7810 125KHZ -30â??ï½?65â?? >100,000 10 Years 85.6x54x0.82 or Custom UHF Alien H3 96-480 Bits ISO18000-6C 860-960MHz -30â??ï½?65â?? >100,000 10 Years 85.6x54x0.82 or Custom UHF Gen2 6C 512 Bits ISO18000-6C 915MHz -30â??ï½?65â?? >100,000 10 Years 85.6x54x0.82 or Custom

NFC RFID card is mainly used in safe application including the bankcard, park card, campus card, access control system. Company Features 1, Products: rfid wristband,rfid keyfob,rfid label, plastic cards without chip, contact/contactless cards, thermal rewrite cards, rfid blocking cards, hybird cards,dual-frequency cards,dual-interface cards, etc. 2, Low price. 3, Quality assurance. 4, Free sample . 5, Professional design,original design. 6, Short producing time. Our Union Card enjoys Ex-factory price and offers this kind of 1Kbytes ISO14443A RFID card at a favorable price. ISO14443A RFID card is mainly used in safe application including the bankcard, park card, campus card, access control system, corporate card and so on and it is implemented by the simulation mode of NFC to use for connecting with mobile internet, location based services and social networking.

RFID card .

RFID Card, people also calls them MIFARE card, contactless card, proximity card, NFC PVC card, chip card, IC card, UHF card, etc. With the chip of low frequency 125KHz, high frequency 13.56MHz, or ultrahigh frequency 860~960MHz. Since 1980, RFID card was widely used in transportation system, security protection, mobile payment, access control, member managementm, Library card, ID card, UID card, �� Features 1. Material: PVC, PET, PET-G 2. Size: CR80 (85.5*54*0.84mm) or Customized 3. Printing: Full color CMYK Offset Printing, silk screen printing, Pantone color, etc 4. Frequency: LF 125 Khz, HF 13.56mhz, UHF 860~960Mhz 5. Operating Mode: Contactless 6. Reading distance: 1mm-1m, depend on the chip and reader 7. Data retention: 10 years 8. Operating life: Can be read and encode more than 100,000 times 9. Crafts Card surface: Glossy/Matted/Frosted Magnetic stripe: Loco (300 OE), Hico (2750 OE, 4000 OE) Serial Number, Laser number, Laser stamp, Embossing, Invisible UV, Barcode, QR codes, Signature panel, Scratch off panel, Silk full side of gold/silver, Chip Encoding, Mag stripe Encoding, Hot Stamping, Hole punching, translucent, Separate polybag packing, etc

Smart card is the most common product in rfid industry, which is widely Used in telecommunications, security, public transportation, health care, Finance and other fields, which has penetrated into our daily lives. - contactless iso card: 86 x 54 x 0.8mm ± 0.4mm - contact iso card: 86 x 54 x 0.8mm ± 0.4mm - clamshell card: 86 x 54 x 1.8mm

Products Rfid contactless cards pvc smartcard Material PVC/PET/PETG Size CR80 standard, 85.5*54mm generally, thickness 0.84mm Printing CMYK Offset Printing, silk screen printing, Pantone color for choose Craft Card surface: Glossy/Matted/Frosted Magnetic stripe: Loco (300 OE), Hico(2750 OE, 4000 OE) Serial Number, Barcode, Signature panel, Silk full side of gold/silver, Chip Encoding, Mag stripe Encoding, Hot Stamping, Hole punching, Separate polybag packing, etc

1, Products: rfid wristband,rfid keyfob,rfid label, plastic cards without chip, contact/contactless cards, thermal rewrite cards, rfid blocking cards, hybird cards,dual-frequency cards,dual-interface cards, etc. 2, Low price. 3, Quality assurance. 4, Free sample . 5, Professional design,original design. 6, Short producing time.

Operating frequency 13.56MHz Operating Mode Contactless Reading distance 1-10cm, depend on the chip, working environment and reader Data retention More than 10 years Operating life Can be read and encoding more than 100,000 times

Fingerprint Mifare S50 RFID Contactless Card FPrfid-S50 is a powerful 13.56Mhz Mifare S50 RFID card built-in capacitive fingerprint sensor with MCU embedded recognition algorithms. The Cermet-like coating of the fingerprint sensor provides up to 6H hardness and protects sensors against scratch, impact, and daily wear-and-tear. It can be widely applied in various fields such as access control systems, locks, and safes, high-level security applications. With the software of fingerprint enrollment, the administrator can easily manage finger enrollment. - SPECIFICATION - **Mifare RFID Card** *Card Size : 85.6 (L) x 54 (W) x 0.74 ~ 0.84 (T) mm *Chipset : Philips MF1 IC S50 *Frequency : HF 13.56Mhz *Card Material : ABS, PVC, PET as requested *LED Indicators : 2 LEDs, red indicates power on; green indicates fingerprint recognition *Embedded Battery : Solid state battery for fingerprint sensor *Card Warping/ Curl Test : Compliance ISO/IEC 14443-1 4.3.3, ISO/IEC 10373-1 5.8 **Capacitive FingerPrint Sensor** *Resolution / Sensing Area : 508 DPI / 8 x 8 mm or 160 x 160 pixel *Sensor Type : Capacitance Type *Supply Voltage : 3.0 ~ 3.6VDC *Hardness / Surface : Up to 6H / Cermet-like Coating *FAR / FRR : 0.0001 / < 2% *Fingerprint Template Number : Finger number x 5, each finger image x 8 *Battery Life : 300 times operation based on 6 sec. when pressing power button *Operating Temperature : -10 ~ 50o C / < RH 20 ~ 85%

Contactless card, also called proximity card, with the chip of low frequency 125KHz, high frequency 13.56MHz, or ultra-high frequency 860~960MHz.With customers of more than 100 countries, RFIDHY can offer you various RFID products with super quality, cost-effective price and fast delivery!We also welcome our customers to consign chips to us for final card production in China. Features 1. Materials: PVC, PET, ABS, PET-G, etc. 2. Size: CR80 (85.5*54*0.84mm) or Customized 3. Chip Available: TK4100, EM4200, Hitag2, F08, MIFARE 1K, MIFARE 4K, MIFARE Ultralight, MIFARE DESFire EV1, I CODE SLI, Alien H3, Alien H4, Monza 4/5/6, etc. 4. Protocal: ISO11784/ ISO14443A/ ISO15693/ IS18000-6B/ EPC C1 GEN2 5. Frequency: LF, HF, UHF or LF+HF, HF+UHF, LF+UHF 6. Crafts: Barcode, Scratch off panel, Signature panel, Spray number, Laser number, Embossing, etc. 7. Encode: Available 8. ID Number Printing: Jet dot printing/ Thermo transfer/ Laser engrave 9. Surface: Frosted/Glossy/Matte Finishing 10. Printing Options: Full color offset printing, Silk-screen printing, etc. 11. Application: Membership Management, Access Control, Hotel, Transportation, Loyalty, Promotion, etc.

Material PVC Dimension 85.60 x 54.00mm (credit card size ,CR80 or customization) Thickness 0.3mm, 0.5mm, 0.6mm, 0.84mm (0.3mm to 1.5mm upon request) Frequency 13.56MHz Encoding Available Printing Offset Printing, Silk-Screen Printing Card Surface Matt/Glossy Finish Package 200PCS/Box, Box Size: 21.5*9*5.5CM; 2000PCS/Carton, Size: 49.5*24.5*13.6CM, 14KG/Carton; Applications Membership Management, Access Control, Hotel, Transportation, Loyalty, Promotion, etc. Available Crafts 1. signature panel and scratch panel 2. Offset print Pantone color 3. barcode in different types(39/EAN 13/EAN 128...) + QR Code 4. hot stamping gold/silver color 5. hologram as required 6. personalization: Emboss or thermal print Card Number, member name & expiry date etc

Material: PVC, PET or PETG. Finishing: Glossy, semi-glossy, matt, spot-UV glossy, crystal surface. Printing: Full color offset printing, Silk screen printing, Digital printing, UV security printing. Applications: Student/staff ID, access control, public transportation, parking and toll, electronic cash, network security, loyalty and so on

Material High quality new brand Class A PVC Card Size CR80 standard credit size 85.5 x 54mm or customized Thickness ISO standard size 0.76mm or customized Chip brand NXP Chip type 100% original NXP MIFARE® Classic 1k Surface Glossy/matte/frosted lamination Printing CMYK full color printing both sides(Germany Heidelberg five colors offset printing machine) P.S. print with your own design layout Design file formats can be AI, PDF or CDR Card type NFC card Memory 1K Frequency 13.56MHz Readable& writable time >100,000 times Protocol ISO14443A Application Enterprise/ Campus one-card, Public transportation, Event ticketing, Loyalty card, Bus- stored value card, RFID contactless card in freeway collection toll, Parking, Residential management, Stored-value and the like areas. (MIFARE and MIFARE Classic are trademarks of NXP B.V.) Brand: WLT RFID Card

. Mifare 1k card . Mifare 4k card . Mifare 4k Desfire . Icode SLI (MOA2) . Icode SLI . Hitag . EM - Proximity card . Ultralite 512bit Mifare . 1kb contactless card . Proximity card . 1k Inlays . Pesonalization of card 5000 nos.

Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722(followed shanghai encipherment standard, custom-made) Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm (Mifare One, normal distance) SAM card slot: 2 slots, supported ISO7816 T=0, supported 9600bps & 38400bps Interface: RS232C or USB (build-in CP2102 USB to RS232 converter) Baud rate: 9600 ~ 115200 BPS Power supply: DC5V Power consumption: 180mA Dimension: 123mm¡Á88mm¡Á25mm Weight: about 150g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF 1pc/box, 16*12*5cm.

We mainly adopt the Mifare Classic 1K with 1 Kbytes Eeprom read/write memory and Mifare Classic 4K with 4 Kbytes of EEPROM read/write memory. They are compatible with existing MIFARE infrastructures. Operating in accordance with ISO 14443A, Mifare 4K functions at a distance of up to 10 cm with true anti-collision properties and without the need for a battery. The Mifare classic family is the pioneer and front runner in contactless smart card ICs operating in the 13.56 MHz frequency range with read/write capability We also make the I-code SL2, Mifare Ultralight, Ultralight C, Mifare Desfire D21D41D81, ISSI24C16, ISSI24C02, ISSI24C64, Mifare Plus 2k4k, EM4200, EM4450, EM4305 etc. 200pcs per box , 2000pcs per carton. Each carton gross 27.5kg.