1. Belleville disc springs and washers are designed to din 2092 and manufactured to din 2093.
2. Depending on the spring dimension the load deflection curve can be linear, regressive or progressive.
3. Optimal use of space and utmost spring load with minimum deflection (very high loads in the smallest of spaces).
4. Considerable dampening especially when stacked.
5. Minimal relaxation occurs provided the permissible stress is not exceeded.
Shuangyuan manufactures high-quality disc springs for all types of industrial applications. Disc springs are commonly referred to as belleville springs, belleville washers, belleville spring washers, or disc spring washers. All disc springs are manufactured to the din 2093 specification. The product range includes conventional disc springs, slotted disc springs, wave springs, disc spring stacks, and special springs.
Disc Springs are conically formed angular discs that are loaded in the axial direction. They can be statically loaded as well as subject to continuous dynamic loads. They can be used as a single disc or multiple in a stack combination to achieve desired deflections and characteristics. A spring stack can consist of either single spring or parallel spring sets. Disc Springs offer a well-developed solution to many engineering problems through a unique combination of high force in a small space. Disc spring stacks may be designed for extremely high loads where coil springs are not feasible at all.
Disc springs Din 2093 is manufactured in high-quality spring steel grade 50CrV4 / 51CrV4, stainless steel 301, Stainless steel grade 304, stainless steel 316, Precipitation hardened 17-7, Inconel 750 and Inconel 718. Sizes ranging from outer diameter 6 mm to 350 mm and thickness of 0.4 mm to 16 mm.
Our Belleville washers are manufactured as per DIN 6796 and are available as per customersâ?? requirements. Being one of the premier Belleville washers Din 6796 supplier, stockist and exporter, we offer these quality products at best market rate to our valuable customers.
Belleville Washer is also called as a Conical Washer / Conical Springs Washer, designed and developed especially for heavy bolted sections like Transformers, Rectifiers, Transmission, and many more. These Belleville washers are made for the better effect of bolt nut setting assemblies. Belleville washers primarily consists of convex disc which is supported by force at an outer periphery and another opposing force at the centre. To achieve a desired load, these washers are used as a single or in stacks. In the position of compression, our Belleville washer can generate maximum force in short spring length. It allows vibration and used to maintain a safe distance between important machine parts. Belleville washers can be used for locking purposes in the application of low dynamic load. They are used as springs or to apply pre load to bolt joint. They are used in formula one car because their ability of extreme detailed tuning. Belleville washers are also useful indicator of shrinkages made in wooden propellers of experimental aircrafts, when it is used on mounting bolts and can be detected easily.
GENERAL APPLICATIONS of BELLEVILLE WASHERS ARE: -
Bus Bars in Transformers
Automobile & Heavy construction
Agriculture & Heavy Machineries
Mining & Turbine construction
1. Belleville disc springs and washers are designed to din 2092 and manufactured to din 2093.
2. Depending on the spring dimension the load deflection curve can be linear, regressive or progressive.
3. Optimal use of space and utmost spring load with minimum deflection (very high loads in the smallest of spaces).
4. Considerable dampening especially when stacked.
5. Minimal relaxation occurs provided the permissible stress is not exceeded.
L).
Cartons and plywood pallets
32233 Belleville Disc Springs And Washers Suppliers
Short on time? Let Belleville Disc Springs And Washers sellers contact you.
1. Belleville disc springs and washers are designed to din 2092 and manufactured to din 2093.
2. Depending on the spring dimension the load deflection curve can be linear, regressive or progressive.
3. Optimal use of space and utmost spring load with minimum deflection (very high loads in the smallest of spaces).
4. Considerable dampening especially when stacked.
5. Minimal relaxation occurs provided the permissible stress is not exceeded.
6. Highest life cycle with dynamic loads.
7. Available spring steel material: 6150 ¡ê¡§50crva) , 30w4crva (1.4122 x39crmo17-1).
8. Available stainless steel material: 17-7ph (sus631, 1.4568 x7crnial17-7) , sus301 (1.431 x10crni18-8) , sus316 (1.4401 x5crnimo17-12-2 , 1.4436 x5crnimo17-13-3) , sus304 (1.4301 x5crni18-10) , inconel 718 (2.4668 nicr19nbmo) , inconel 750 (2.4669 nicr15fe7tial).
1. Belleville disc springs and washers are designed to din 2092 and manufactured to din 2093.
2. Depending on the spring dimension the load deflection curve can be linear, regressive or progressive.
3. Optimal use of space and utmost spring load with minimum deflection (very high loads in the smallest of spaces).
4. Considerable dampening especially when stacked.
5. Minimal relaxation occurs provided the permissible stress is not exceeded.
6. A) , 30w4crva (1.4122 x39crmo17-1).
8. Available stainless steel material: 17-7ph (sus631, 1.4568 x7crnial17-7) , sus301 (1.431 x10crni18-8) , sus316 (1.4401 x5crnimo17-12-2 , 1.4436 x5crnimo17-13-3) , sus304 (1.4301 x5crni18-10) , inconel 718 (2.4668 nicr19nbmo) , inconel 750 (2.4669 nicr15fe7tial).
Our Conical Springs washers are manufactured as per DIN 6796 and DIN 2093. Conical Springs Washer are available as per customers requirements also.
Conical Spring Washer is also called as a Disc springs / Belleville Washer, designed and developed especially for heavy bolted sections like Transformers, Rectifiers, Transmission, and many more. These Conical spring washers are made for the better effect of bolt nut setting assemblies.
Product Grade: As per Client Requirement (MS/SS, etc)
Minimum and Maximum Price: As per Request
Price Units: USD
Incoterms: As per Mutual Understanding with Buyer
Product Origin: India
HS Code: Provided as per product
Minimum Order Size: NO MOQ (We can cater small quantities also)
Packaging Details: For Export Material (Export Quality Wooden Box)
1. Surface treatment: Phosphating, electrophoresis, oxidize bluing, mechanical Zinc plating
2. Material: SUS301 SUS 304 SUS316 and pH17-7, pH17-4 and 60Si2Mn 50CrV5 5CrS etc.
3. Usage: Disc spring used for Valve
4. Standard: JB/T8064
5. Specification is available by contacting with us
6. We can customize disc spring as per customer's requirements.
7. Application: Production facilities, instrumentation industry, control valve manufacturer, power station
8. Disc spring stacks are under hydraulic preload in the open position in quick-action valves. After a failure, the hydraulic pressure drops and releases the spring stack, hence closing the valve. This application mainly uses ball bearing centered stacks. In addition, the spring stack has a self-adjusting function by countering the set-loss of gaskets. This conserves overhead costs as it minimizes required maintenance
9. Annual out put: 40, 000, 000PC/year
10. Place of Origin: Yangzhou, China
11. Brand: Sunzo or OEM
12. Delivery time: 10 days.
1. Belleville disc springs and washers are designed to din 2092 and manufactured to din 2093.
2. Depending on the spring dimension the load deflection curve can be linear, regressive or progressive.
3. Optimal use of space and utmost spring load with minimum deflection (very high loads in the smallest of spaces).
4. Considerable dampening especially when stacked.
5. Minimal relaxation occurs provided the permissible stress is not exceeded.
6. Highest life cycle with dynamic loads.
7. Available spring steel material: 6150 ¡¡§o¡¡¨¬50crva) , 30w4crva (1.4122 x39crmo17-1).
8. Available stainless steel material: 17-7ph (sus631, 1.4568 x7crnial17-7) , sus301 (1.431 x10crni18-8) , sus316 (1.4401 x5crnimo17-12-2 , 1.4436 x5crnimo17-13-3) , sus304 (1.4301 x5crni18-10) , inconel 718 (2.4668 nicr19nbmo) , inconel 750 (2.4669 nicr15fe7tial).
