Bag Filter Housing Suppliers and Manufacturers

Bag Filter Housing

SAN-MBH SAN-MBH Sanitary Stainless Steel Bag Filter Housing Satinless Steel Sanitary bagfilter housings have surface finish of mechanical polished, making the housings ideal housings can be disassembl for demanding processes requiring high purity.The ed in all parts eliminating possibility of rtained particles and and making more effective cleaning. The design of clamp closure advantages the housing with convenient operation and quick element change out. Manufactured by 100% stainless steel,the housingare competent to workin a wide range of critical applications.

MOC : SS316L, SS316, SS304, MS, MSRL, PTFE LINING Suitable Size : 4³ x 10³, 4³ x 20³, 7³ x 17³, 7³ x 32³ ( 1,2,3,4,5,6,27 Nos. Bag) Line Size : 1â?³ NB to 40â?³ NB Connection Type : BSP(F), NPT(F) Thread, Flanged 150#, Table E, Table F Hydro Test Pre. : up to 100 kg/cm2 Flow Rate : 1500 m3/hr Design : Customised (as per your requirement) Type : Jacketed / Non-Jacketed APPLICATION: Water, DM Water, Waster Water Paints & Inks Solvent Oil Coolant Filtration Pharmaceuticals Process Chemicals Resins & Adhesive FEATURES: High Flow Rate High Dirt Holding Capacity Easy to Clean Easy to Operate Customized Design Various Type of Filter Bags High-Pressure Housings Low Maintenance

Introduction The ARDS series bag filter housing is a pre-filtration equipment commonly used in a variety of industrial liquids, constructed from stainless steel materials (SUS316L or SUS304). Mechanical grinding or electrochemical polishing makes the surface smooth and easy to clean. The product features a rational structure, making it easy to install and replace the filter bag. It also adopts a double sealing ring design, which ensures excellent sealing in special production environments. When the liquid passes through the filter bag, solid particles, suspended solids, sediments and other impurities can be effectively intercepted, so that the clean liquid flows out of the outlet of the filter, which helps achieve the effective filtration and purification of large particles of impurities in the liquid. Specification Material: SUS304, SUS316L Filter type: Liquid Bag type: Single bag or multi-bag Filter specification: Multi-specification selection or customization Application Suitable for liquid pre-filtration in various industries.

Bag filter housing Model A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) H (mm) K (mm) NO.Bags M3/H 400-2F 1346 1092 254 584 108 400 362 516 2 60 450-2F 1397 1143 292 660 120 450 362 516 2 60 500-3F 1575 1143 343 686 120 500 432 567 3 90 500-4F 1575 1143 343 686 120 500 432 567 4 120 550-4F 1580 1160 360 736 150 550 494 704 4 120 550-5F 1580 1160 360 736 150 550 494 704 5 150 600-4F 1626 1226 356 876 150 600 520 750 4 120 600-5F 1626 1226 356 876 150 600 520 750 5 150 650-5F 1750 1320 356 876 150 650 494 704 5 150 650-6F 1750 1320 356 876 150 650 494 704 6 180 700-6F 1780 1360 356 876 150 700 520 750 6 180 700-7F 1780 1360 356 876 150 700 520 750 7 210 750-8F 1880 1430 480 1050 200 750 672 960 8 240 800-9F 1900 1450 480 1050 200 800 710 1010 9 270 900-10F 2007 1510 533 1219 216 900 813 1163 10 300 1000-12F 2050

The polypropylene filter housings are ideally used for wide range of applications including residential, commercial and industrial. These are available in 10" and 20" configuration with both slim for low flow and Jumbo for large flow application. The Optional Relief Valve on the inlet of the cap gives ease of air release and prevents vacuum damage and full utilization of the filter elements. The thick side walls give it high pressure ratings. The silicon O rings makes it Leak Proof even at high pressure applications. Sizes (inch) : 2.5" x 10, 2.5" x 20", 4.5" x 10", 4.5"x 20" End Connection : 1/2", 3/4", 1", 1.5" The polypropylene filter housings are ideally used for wide range of applications including residential, commercial and industrial. These are available in 10" and 20" configuration with both slim for low flow and Jumbo for large flow application. The Optional Relief Valve on the inlet of the cap gives ease of air release and prevents vacuum damage and full utilization of the filter elements. The thick side walls give it high pressure ratings. The silicon O rings makes it Leak Proof even at high pressure applications. Sizes (inch) : 4.5" x 10", 4.5" x & 20" End Connection : 1.5" BSP female threaded connection

The bag filter is a pressure type water treatment system . The inside of the water filter is supported by a metal inner net. The liquid flows into the filter bag from the side inlet of the filter housing.  After filtering through the filter bag, the required removal rate is reaching.The impurities are intercepted in the filter bag, and the filter bag can be replaced or cleaned. The bag filter consists of three parts: a stainless steel housing, a support basket and a filter bag. The stainless steel bag filter has many advantages such as simple , reasonable structure, good sealing performance, long service life, simple operation and installment. In particular, the side leakage rate of the filter bag is very small, the filtration precision can be accurately ensured, and the filter bag can be quickly replaced. The inner and outer surfaces of the filter are mechanically blasted and polished to make it uniform and easy to clean. Stainless steel filters are also accepted customized, with filters in the form of clamp type ,flange type,top-into type,multi -bag type,and adjustable standoffs or hooks to satify different customers needs. FEATURES 1.The bag filter has large flow rate capacity, small volume and dirt holding capacity. 2.It is convenient and quick to replace the filter bag, and the filter is no-clean, saving labor and time. 3.The side leakage rate of the filter bag is small, which greatly improves the filtration quality. 4.The bag filter can withstand greater working pressure, low pressure loss, low operating cost and obvious energy saving effect. 5.Filter bag filtration accuracy has been continuously improved and has reached 0.5um. 6.The bag filter has a wide range of applications, flexible use and various installation methods. Widely used in environmental protection, chemical, metallurgical, pharmaceutical, food and other industries. LY-BFH Stainless Steel BAG Filter Housing standard Specification: material SS304 or SS316 bag material PP/PE/SS surface treatment Polishing or matte treatment Top Cap installed type clamp /flange type,customized inlet/outlet connection screw/flange type/customized seal O-ring silicon,NBR, EPDM, Viton usage liquid,gas filter GOOD PRICE AND GOOD QUAILTY.CALL ME +86 13574135485 LET'S TALK THE DETAIL.

Application: Edible Oil/Lube oil and Chemical Filtration Industry Specification: Material: SS 304/316 Size: Size1 and Size2 Filter Bags or Can be Customized. Housing Can be Supplied with Flange Type or NPT Threading. Includes Differential Pressure Gauge. Packing: In a Wooden Box

Bag Filter has 1 pc �?180mm bag cartridge inside of it. A. Fully Filter Housing and accessories are made of FRP material( which are �nished by SMC method) .Non-corrosive, no leakage and could bear high pressure & high temperature. B. Filter internal structure design is unique, novelty and reasonable. The lower end is supported by a continuous air. The upper end is provided with the �lter bag positioning lock block. The �lter bag can be �xed only by rotating it 60 degrees. C. The customers only need to revolve the �lter cartridge then could be �xed because internal structure has its cartridge positioning function. Install and change cartridges without any tools, it also decrease the time of change cartridge. D. The surface of bag fillter adopts the laminating process, which is beautiful, environmentally friendly and color adjustable.

Liquid Filter Bags