QUANTITY: Minimum. 50,000 bbl per month. Maximum. 2,000,000 bbl per month. PAYMENT: SBLC INSPECTORS: S.G.S OR ITS EQUIVALENT. DELIVERY: CIF/FOB. POD: TBA COMMISSION: USD $2.00 Per BBL Buyer Side USD $2.00 Per BBL Seller's Side closed PRICE: As published in plats crude oil market wire for the three (3) day's consecutive publication used after discharge
Straight from Kazakhstan. Shipped Worldwide. Quantity: Million BBLS / 4 Million BBLS with possible rolls and extensions. Loading Ports: FOB Rotterdam / Tank to Vessel (TTV) Origin : Kazakhstan Price: Gross USD $80 BBL/ Net USD $76 BBLS Contract Term: Spot and roll over to 12 months contract Paymemt Methods: MT103, TT wire transfer. Inspection by: SGS or equivalent. Currency: U.S.A. Currency. 1. Buyer sends ICPO in line with seller working procedures alongside his/her Tank Storage Agreement (T.S.A.) on receipt and acceptance of Seller's Soft Offer 2. Seller issues Commercial Iinvoice (C.1.), Buyer Signs within 24 hours and returns to Seller within its validity 3. Upon receipt and review of the signed C.1., seller issues Dip Test Authorization (D.T.A) to be completed and signed by buyer/ Buyer's logistics in order for Dip Test to be conducted alongside counter signed copies of the C.1 4. Buyer returns the Dip Test Authorization (DTA) fully completed and signed within its validity and upon successful review of the completed DTA, seller issues the below full POP documents:- Fresh SGS Report (Not older than 72 hours);
Minimum Quantity: 2,000,000 Barrels @ Trial lift Maximum Quantity: 4,000,000 Barrels @ Monthly Supply Price: Gross $70.00USD / $68.00USD Net on FOB Price: Gross $74, 00USD / $72.00USD Net on CIF Commission: Buyer's Side $2.00 USD / Seller's Side $2.00 USD
Origin: Republic of Kazakhstan / Russian Federation Price: Gross $52.00/Net $ 50.00 per Barrel Trial Shipment: Two Million (2,000,000) Barrels Available
Ultra low sulfur diesel (en590), aviation kerosene colonial (grade a1) jet fuel, aviation kerosene colonial (grade 54) jet fuel, liquified natural gas (lng), liquified petroleum gas (lpg).
AVIATION KEROSENE COLONIAL GRADE 54 JET FUEL - Minimum Quantity: 500,000 Barrels per Month Maximum Quantity: 5,000,000 Barrels per Month
Oil and gas, aviation kerosene colonial grade a1, jet fuel a1.
Aviation Kerosene Colonial Grade 54 Jet Fuel (JP54) Requirement from Buyer is a Mast to answer your inquiries. 1. Product: 2. Quantity: 3. Destination: 4. Term Contract Only ): 5. Payment Term: 6. Target Price: 7.Letter Of Intent :
JET FUEL JPA1 (AVIATION KEROSENE COLONIAL GRADE A1) Requirement from Buyer is a Mast to answer your inquiries. 1. PRODUCT: 2. QUANTITY: 3. DESTINATION: 4. TERM CONTRACT Only ): 5. PAYMENT TERM: 6. TARGET PRICE: 7.Letter of Intent (LOI)
JET FUEL JPA1 (AVIATION KEROSENE COLONIAL GRADE A1)
AVIATION KEROSENE COLONIAL GRADE 54 (GOST 10227-86) Product Origin: Kazakhstan / Russia Minimum Order Size: 10,000 MT
Available products: JET A1/JP54, CRUDE OIL, D2, D6, EN590, DIESEL 10PPM & 50PPM, BITUMEN, MAZUT M100, Copper. Safe procedure and long-term cooperation - that is our motto. As an experienced team based in Berlin, with direct contacts to refineries and direct clients, I and my team ensure a smooth procedure. For us, the customers are the focus of everything we do. To be successful, we need to know what our buyers need. We want to ensure that we offer our buyers added value with our solutions. We meet our commitments and meet our deadlines and goals. Send us LOI so that we can start processing the order. If you have any questions please do not hesitate to contact us! Available products: -JET A1 -JET JP54 -Diesel D2, -EN590 10 PPM, -Diesel D6, -Diesel 50 PPM. -BIODIESEL -Mazut M100 -Bitumen -Crude Oil -Copper
Aviation Kerosene Colonial Grade 54 Jp 54 Jet Fuel A1 Product Description Aviation Kerosene Colonial Grade 54 Jp 54 Jet Fuel A1 Jet Fuel Is Designed For Use In Airplanes Powered By Gas Turbine Engines It Has A Clear To Straw Color Look The Most Regularly Used Fuels For Commercial Aviation Are Jet A And Jet A1 Which Are Manufactured To A Defined Worldwide Specification The Seller Will Issue The Necessary Documents As Agreed In The Delivery Procedure Contact Us In Order To Issue The Soft Offer To Your Company For Proceeding SELLER WORKING PROCEDURES TERMS AND CONDITION FOB PRICE US8000 85 PER Barrel Negotiable ORIGIN KAZAKHSTAN Key SpecificationsSpecial Features 2710192100 Jet A1 is the standard specification fuel used in the rest of the world Jet A1 has a flash point higher than 38 C 100 F with an auto ignition temperature of 210 C 410 F
A1, Jp54 Aviation Kerosene
1. Aviation Jet Fuel A1 2. Aviation Jet Fuel JP 54 3. EN590 10 ppm FOB Rotterdam, Fujairah, Houston Minimum 1,000,000 bbl Maximum 5,000,000 bbl No upper limit PROCEDURE ------------------ TRANSACTION PROCEDURES FOR FOB DELIVERY 1. Buyer accepts seller working procedure and issues ICPO with company registration certificate alongside copy of passport page 2. Seller issues commercial invoice (CI), Buyer signs and returns back commercial invoice. 3. Seller issue TSR with GPS coordinate to Buyer Company, 4. Buyer contacts the Seller's storage facility for tank extension to enable Buyer approval to gain access to the facility and execute the Quality & Quantity Inspection in Seller Tank Farm for FRESH Analytical Report/Result by SGS. 5. After successful DIP test, (NCNDA/IMFPA) will be signed by all parties. 6. Seller injects product into Buyers vessel or injects into Buyers tanks Buyer or buyer take over the storage tanks, within maximum 48 hours Buyer pays via MT 103/TT for the spot transaction and seller issues all export documents to buyer. 7. Upon conclusion of first lift transaction seller pays all intermediaries involved in the Transaction. Payment Terms : LC / SBLC / MT 103/TT ---------------------------------------------------------------------- Commodity: Bonny Light Crude Oil (BLCO) Grade: NNPC STANDARD Origin: NIGERIA BLCO Quantity: Initial 1 million or 2 million barrels. Contract: 1year + 2 further years rolling Term: SPOT LIFT / OFF OPEC Price: Dated Brent 3days Before & 3days after the bill of lading $12 Less $5 GROSS $9:00 to buyer, $4:00 to buyer/seller mandate/agents, $1:00 to consultant/handler.
Russian Origin Aviation Kerosene Colonial Grade 54 Jet Fuel PRICE: USD 80/BARREL Min order of 500,000MT per Month
Hello, We can supply petroleum products at following price and procedures: Export Grade: LOADING PORTS- ROTTERDAM/HOUSTON Origin: Kazakhstan Payments Term: MT103/23/ TT wire transfer Inspection by: SGS, INTERTEK OR SIMILAR JET FUEL A1 (AVIATION KEROSENE COLONIAL GRADE A1) Quantity: Minimum 1,000,000 BBL spots / Maximum 5,000,000 BBL per month FOB PRICE: Gross USD 90 NET PRICE: USD 86 (Commission: Seller 50 / buyer 50) EN590 (10 PPM) Quantity: 100,000 MT 500,000 with possible Roll & Extension FOB PRICE: Gross USD 420 NET PRICE: USD 400 (Commission: Seller 50 / buyer 50) EN590 (50 PPM) Quantity: 100,000 MT 500,000 with possible Roll & Extension FOB PRICE: Gross USD 420 NET PRICE: USD 400 (Commission: Seller 50 / buyer 50) APPROVED FOB DELIVERY PROCEDURE 1 Buyer sends ICPO in line with seller working procedures alongside his/her Tank Storage Agreement (T.S.A.) on receipt and acceptance of Seller's Soft Offer 2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller within its validity 3. Upon receipt and review of the signed C.I., seller issues Dip Test Authorization (D.T.A) to be completed and signed by buyer/ Buyers logistics in order for Dip Test to be conducted alongside counter signed copies of the C.I 4. Buyer returns the Dip Test Authorization (DTA) fully completed and signed within its validity and upon successful review of the completed DTA, seller issues the below full POP documents: - A. Fresh SGS Report (Not older than 72 hours); B. Product Reservoir Receipt; C. Accreditation Certificate; D. Product Passport (Quantity and Quality Analysis); E. Authorization to Sell and Collect Certificate (ATSCC); F. Pre-Injection Report (PIR); G. NCNDA/IMFPA (To be completed by all intermediaries); H. Certificate of Product Origin; Authority to Verify (ATV) either physically or otherwise. 5. Upon receipt and confirmation of the above POP Documents, Buyer provides its testing officials (SGS or INTERTEK) and the needed test are carried out on the product in sellers tanks; 6. Buyer upon successful Dip Test makes full payment by MT103 / TT wire transfer for the total product and Seller pays commission according to NCNDA/IMFPA to all intermediaries involved in the transaction within 24 hours after confirmation of buyer's payment and injection commences immediately. 7. Seller issues a contract for buyers desired duration upon successful completion of the trial order. All intermediary is paid within 48 hours and seller and buyer consider and sign contract.
Maximum Quantity: 2,000,000 Barrels per Month CIF Price: Gross USD $88.00BBL NET/ USD $86.00 NET on CIF FOB Price: Gross USD $ 86.00BBL NET / USD $84.00 NET on FOB TERMS OF NEGOTIATION ORIGIN: FEDERAL REPUBLIC OF NIGERIA INCOTERMS: CIF/FOB/TTO LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT TERMS: SBLC-MT760, MT103 PERFORMANCE BOND: 2% PB CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS) INSPECTION: SGS, CIQ OR SIMILAR COMMISSION: STRUCTURED NCNDA/IMFPA FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION) 1. Buyer sends ICPO in line with seller working procedures 2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity. 3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days. 4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: - SGS report, Pre- Injection Report, Commitment Letter to Supply Authorization to sell & collect. 5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel. 6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value 7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction. 8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.