Features and Benefits Robust and compact design, high quality brass construction, valves have long life cycle. Thread in accordance with BS EN 10226(ISO7) or ISO228 Applicable Standards Connection standard: ISO228 Technical Data Nominal Diameter:DN15~DN50 (1 2"~2") Nominal pressure: PN 16 Temperature range: -5C ~ +85C Sealing test: 1.1PN Shell test: 1.5PN Suitable for: Water, ethylene glycol, non correction medium, etc.
Brass Air Release Valve Pressure Rating : PN-16 Material : Forged Brass Description : PP Float, Spring : SS 304 Ends : Screwed Female to BS:21 Item Code : GM000210 Size : 15mm Notes : Available Valve Size : 15mm to 25mm
We are leading manufacturer and exporter of Brass & metal Air Release plug as per customer specification or requirement.
Cast Iron Air Release Valve Pressure Rating : PN-16 Material : Cast Iron / Ductile Iron Description : Single Ball Type, EPDM Coated Wooden Balls Ends : Screwed Male BSP Taper threads to BS:21 Item Code : CI000047 Size : 15mm Notes : Available Valve Size : 15mm to 50mm
Cast Iron Air Release Valve Pressure Rating : PN-16 Material : Cast Iron / Ductile Iron Description : Double Ball Type, EPDM Coated Wooden Balls Ends : Flanged Item Code : CI000026 Size : 25mm Notes : Available Valve Size : 25mm to 200mm
Cast Steel Air Release Valve Pressure Rating : Class-150 Material : Cast Steel (WCB) Description : Double Ball Type (Soft Rubber Coated) Ends : Flanged Item Code : CCS00017 Size : 25mm Notes : Available Valve Size : 25mm to 200mm
Cast Iron Kinetic Air Release Valve Pressure Rating : PN-1.6 Material : Cast Iron / Ductile Iron Description : Double Ball Type, Ebonite Coated Wooden Ball Ends : Flanged Item Code : CI000094 Size : 50mm Notes : Available Valve Size : 50mm to 200mm
The manufacture of both granulated and powdered garlic is the same, except for the grinding or powdering process. Granulated garlic is coarse while garlic powder is ground extra fine. Whole cloves of garlic are peeled, cleaned and then sent into a machine that slices and chops them into smaller sections. The sections are dried in slow ovens for three to four hours. When the garlic has cooled it is ground to the desired consistency, be it granulated or powdered. The finished products are put through sifters to separate any debris or undesirable pieces. Both are packaged in air-tight containers and stored in a cool, dry place. Granulated and powdered garlic are used to season and enhance the flavor of many foods. Often it is an appropriate substitute when fresh garlic is called for in a recipe. Powdered garlic dissolves almost instantly when incorporated into any dish, hot or cold. Granulated garlic takes a few minutes to become incorporated and release its flavor. We can offer Garlic Granules in 0.5mm to 1.0mm, 40/60 mesh, 26/40 mesh - 20 FCL: 10 Mt (Flakes/Cloves), 14-15 Mt (Minced/Granules/Powder) - 40 FCL H/C: 20 Mt (Flakes/Cloves), 25-30 Mt (Minced/Granules/Powder) Product Packing - 12.5/13/14 Kg Paper Bag inside 1 Poly Bag - 20/25 Kg Cartoon inside 1/2 Poly Bag - 20/25 Kg Cartoon inside 1/2 Aluminium Foil Bag Our range includes: - Dehydrated Garlic Flakes/Cloves (5-10mm) - Dehydrated Garlic Minced (1-3mm, 3-5mm) - Dehydrated Garlic Granules (G1, G2, G3) - Dehydrated Garlic Powder (80-100 mesh) -
Adopting unique production technology, Focus- 6300 buytl tapes are mainly made of butyl rubber supplemented by other auxiliaries and fillers, with the superior high polymer materials. With its strong adhesion property and air-tight property, our waterproof sealing butyl tapes are environmental and solvent-free. Main Specification (Customized demand sare acceptable.) 6mm*8m 8mm*6m 10mm*4.57m Main Color - black Technical Data Product Series FOCUS-6300 Series Application Automotive Industry Elongation 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm Tensile Strength 230KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanized sheet, aluminum sheet and coppersheet. Advantages Strong adhesion, high tensile strength, excellent elasticity and extensibility. It can fully accommodate to the surface that it attached to Excellent performance in non-corrosive, weather resistance and adaptation. Applications Provide waterproof protection to car doors waterproof membrane. Provide waterproof and sealing protection to the battery of new energy automobile. Other waterproof applications on cars and new energy cars
Focus-6200 products are kind of non-hardening and self-adhesive waterproof sealing butyl tapes. The materials are weathering resistance and fully accommodate to the surface that it attached to, with effective life up to 20 years. Main Specification (Customized size is acceptable.) 2mm thickness * 20mm width * 20mm roll length 2mm thickness * 30mm width *20mm roll length Main Color - black, grey, white Technical Data Product Series FOCUS-6200 Series Application Construction Industry Elongation - 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 25N/cm Tensile Strength 250KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet Advantages * Never hardening, maintain good waterproofing property with weathering resistance performance. * Excellent performance in waterproofing and sealing. * Good anti-aging performance effective life up to 20years. * Easy to apply. Applications * Provide waterproof and sealing protection forsteel structure construction. * Provide waterproof and sealing protection for door joints, window joints,roofs and air-ducts. Provide waterproof and sealing protection for sunshine rooms, light plate rooms and thermostatic chamber. * Provide repair function for leaks on surfaces of metal/plastic/glass/concrete.
Features and Benefits Screw connection Self sealing design, low maintain cost Applicable Standards Connection standard: ISO228 Test standards: ISO 5208 Applicable Standards Connection standard: ISO228 Technical Data Nominal Diameter:DN15~DN25 (1 2"~1") Nominal pressure: PN 16 Temperature range: -5C ~ 85C Sealing test: 1.1PN Shell test: 1.5PN Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits Combination Air Valves perform the functions of an Air/Vacuum Valve and Air Release Valves to maintain system efficiency and prevent pipeline surges. Able to release air at high flow rates. High sensitivity: when negative pressure occurs inside pipelines, valves rapidly open to inhale large volumes of air and protect the pipelines from damage. Floating ball and main disc are in stainless steel. This provides long service life, safety and reliability. Applicable Standards Flange Standard: EN1092-2 Design Standard: AWWA C512
Carbon fish meat grill oven process: A. special high temperature resisitant material,high heat deformation,the overall structure uses professtional plate ; B.all into oxygen at the bottom of the damper desigh,fast burning heat rapidly ,at teh top of the air valve design,effective control of heat loss; C. origianl putty separation technology,completely avoiding using process because of the putty mixed soot and open flame,ensure clean,health and safety ; D.equipment applied double high temperature heat insulation material,insulation system,insulation with security,external direct touch with no hidden dangers. Operation method: A. all burning charcoal in the burning charcoal ,open at the top the smooke at the bottom of the mouth and damper; B.charcoal burning closed 10 minutes to the degree of smoke-free smoke at the top of the mouth,the heat; C.after the temperature reaches the standard,in the baking objects to buy object ; D.5-10minutes,bake fish until brown on both sides,are taken from the furnace, the plate feeding . Equipment advantages : A. unique design principle ,the use of charcoal smoke all gathered in the grilled fish inside furnace,through the top of the exhaust pipe directly emitted; B.rapid heat,guarantee the production speed,let the charcoal furnace cavity fully burning rapied heating up,wind valve,and through the top to the bottom of the design of air supply outlet temperature in the furnace in a 300-350 degree,put the fish in the distribution on the stove on content cabinet ,only 8-10 minutes can be produced; C. a novel view and admire a gender ,the design of the gear type appeared in front of customers,the grilled fish process more transparent,more ornamental ,fish and clients directly face to face "communication " ; D this design flexibility ,the real achieve a multi-purpose furnace, can bakering chicken duck cattle and sheep for equipment use diversification more rich . Fuel: dual-use carbon box ,burning charcoal or alcohol (vegetable oil ) ,pump design. Installation and commissioning Overall production : have direct admission requiements,no installation commissioning ,one pace reachs the designated position . 1.Solve the smoke problem charcoal grilled fish we are familiar with most of the fish appeared in the night street food stalls ,a rectangular fish furnace ,a big fan, the air is filled with smoke smell fish .
Factory Automatic Hot Eye Onion peeling process machine,from small capacity to big capacity Onion peeling process: the onion is manually fed into the hopper --- the conveyor belt automatically feeds the onion into the peeling box for peeling --- after peeling, the onion goes into the peeling roller. Under the action of high-pressure air at the side, the first and second layers of the onion are peeled off and sent out to complete the whole processing process. Features: 1. Advanced technology, reasonable mechanism, beautiful appearance, safe and reliable use, all stainless steel. 2. Automatic peeling without damage. 3. The depth of peeling is even. 4. The feeding belt is used for automatic feeding, which is simple in design and convenient in use. 5. Less peeling, high recovery rate of finished products, and over 98% of finished products. 6. Mechanical processing eliminates the hidden danger of manual processing of infectious diseases and unsanitary products. Parameters 1.process arrange diameter of round shape onion 30-150mm. 2.capacity 1000-1500kg/h 3.Power 3kw 4.Voltage 380V 5.Air Compressor :flow 1.5m2/min, pressure 0.7MPa ,power 11kw 6.Machine size 1.5*1.3*1.4m 7.Weight 420kg Start working flowing: 1.Fill onion in the loading box 2.Start the pneumatic valve switch 3.Start the power-supply switch 4.According to onion drying or fresh to adjust loading speed button/air pressure ,in order to ensure the clean degree of removing onion skin 5.When finished adjusting ,The equipment operates normally and automatically.
Manufacturers, exporters & importers of stainless steel / copper / brass / aluminium / duplex steel / carbon steel / alloy steel in shape of pipes, tubes, flanges, pipe fittings,round bar, bright bars, angle bar, flat bar, hex bar, square bar, sheets, coils, strip, plates, wire, tie wire, strip banding, decorative tubes / pipe, valves, threaded fittings,forged fittings etc. in any shape / size / grade. also specialised in high nickel alloys like inconel, monel, titanium, hastalloy etc. in any size / type / grade & as per drawing..Manufacturers, exporters & importers
Brass Swing Check Valve BS 5154 Pressure Rating : PN-20 Material : Forged Brass Description : Screwed in Cover Ends : Screwed Female to BS:21 Item Code : FLB00045 Size : 15mm Notes : Available Valve Size : 15mm to 50mm
Brass Universal Check Valve BS 5154 Pressure Rating : PN-20 Material : Forged Brass Description : One Piece Body, Spring Loaded, Resilient Seated Ends : Screwed Female to BS:21 Specials : Suitable for Horizontal & Vertical Installation Item Code : FLB00048 Size : 15mm Notes : Available Valve Size : 15mm to 50mm
Brass Ball Float Valve Pressure Rating : PN-10 Material : Forged Brass Description : Brass Lever with Plastic Ball Ends : Screwed Female to BS:21 Item Code : FLB00066 Size : 15mm Notes : Available Valve Size : 15mm to 50mm
Brass Pressure Reducing Valve Pressure Rating : PN-25 Material : Forged Brass Description : Spring Loaded, Piston Type Ends : Screwed Female to BS:21 Item Code : FLB00123 Size : 15mm Notes : Available Valve Size : 15mm to 25mm
Brass Ball Valve with Strainer Pressure Rating : PN-20 Material : Forged Brass Description : Full Bore, Two Piece Design, Anti Blow out stem Ball : Brass Cr. Plated Stem : Brass, Seats : PTFE, Screen : SS 304 Ends : Screwed Female to BS:21 / IS:554 Operator : Lever Operated Item Code : FLB00285 Size : 15mm Notes : Available Valve Size : 15mm to 50mm
