Automobile loudspeaker 80W 8ohm/16ohm 300-5000Hz sound pressure: 118-120db
Resonance Frequency Hz: 320 ± 20 % Response Frequency Hz: f¬0 ~ 5000 Impedance (at 1 KHz) : 8 ± 15 % Sound output (600, 800, 1000, 1200 Hz in Average) dB: 88 ± 3 Rated / Max. Power W: 0.25 / 0.5 Buzzer & Rattles (Must be normal) : 2V Sine Wave Distortion (0.25W, 1kHz) : 7% Max. Operating Temperature ºC: -30 ~ +70 Storage Temperature ºC: -40 ~ +85 Diaphragm Material: Paper Cone Terminal : Plate Housing Material : Metal.
In-ceiling/wall speakers, car speakers, cabinet speakers, decoration speakers, outdoor speakers, PA systems, and other audio peripheral products, such as cables, volume controls, and so on. No wood packing.
Plastic loudspeaker lm series from 8í¦ to 15í¦ to you. This series it is hot sales market. New face outlook, economy price, reliability and easy installing. Lm series provides the flexible, portable and first-class audio performance for broadcasting or small venue installation. Easy installing hardware ensure all sound contractors with fastest, easiest and secure installation rigging. Multi-positioning at the hardware on the cabinet help to assemble and disassemble the speakers to match any requirement at the any environment.
Speaker, pole piece, back plate, pole, t yoke, buttom plate, pot, u yoke, alarn, horn, woofer, voice coil, cone paper, washer, plate, diaphragm, frame, loudspeaker, dust cap, damper, neodymium, ndfeb, loudspeaker.Exporting
Transmission line speaker Frequency range (+/- 3dB) [Hz]: 35 - 20000 Sensitivity (2,83 V/1 m) [dB]:90 Nominal impedance [ohms]:8 Recommended amplifier power [W]: 50 - 200 High frequency driver: 1" dome tweeter Low frequency driver: 6.5" woofer.
Drivers: HF:1" dome tweeter LF:6.5" paper cone woofer Impedance:8.
Loudspeaker Specification: Model: OBAMA Impedance: 4 ohm Power: 80W RMS Sensitivity: 93dB Fo: 80Hz Frequency response: fo-19KHz Size: 360X230X200(mm) Input connector: SPEAKON Application: suspend & support with tripod. Size: 360X230X200(mm).
Material:350g coated cardboard Loudspeaker: 9*9*9cm 1 pair in 1 cardboard box Packing box:9.2*9.2* 5.5cm Packing:35.5*29.5*30.5cm Quantity/ctn:54sets
Iííc-mark lnd32 line array loudspeaker, outcome of state-of-the-art pro audio manufacturing technology: Neodium-magnet lightweight, high-powered, user-friendly installation. Smart design, ply wood, of international line array standard. Two driving methods: full range driving; or driving hf and lf separately. Rugged, integral array suspension hardware ensures fast, reliable setups and takedowns. Flexible package choices w/o subwoofer. Angle adjustment between speakers creates equal spl. Tweeter horn specially designed to make parallel wave, horizontal dispersion on a same plane. Spl damps at a rate of 3db with double distance increased . For line array speaker system with 6 pcs lnd32, maximum spl tested up to 104db at 100m distance. Iiíícomponents: 2íß12ís neodium- magnet lf driver 1íß3ís neodium-magnet hf driver Hf driver: Item: hi75tindíß1 Rms powerú¦150w Max power: 300w Impedance ú¦16ª+ Lf driver: Item: mf1275and íß2 Rms powerú¦650w Max powerú¦1300w Impedanceú¦16ª+ Full range driving: Rms powerú¦800w Max powerú¦1600w Impedanceú¦16ª+ Frequency responseú¦50hz-18khz Sensitivityú¦108db (1m/1w) Horizontal coverage: 100íp Vertical: depending on curvature vertical angle adjustable: 0-9íp N.W: 41.5kgs G.W: 145kgs(2pcs per flight case) Dimension(mm)ú¦1160(l) x 890(w) x 720(h)
CT2844X full-range loudspeaker Ct classic series manufactured with high power rating and classic design. Full range speaker equipped with ti44 titanium tweeters compression drivers, flat copper voice coil specified copper ring technology and magnet design, ti44 tweeter high & centralized sound pressure level; 8í»í» mid-low with 64mm flat copper voice coil, extending life with high power rating, super heat absorbing material, decreased power limitation and improved efficiency. Together with solid metal frame for speaker installation long life and strength! automatic analog frequency response to divide frequency naturally, creating an even mid-high frequency sound. Individual patent of double fuse circuitry protection, providing a safe long life. Coupled with sub-woofer ct1501xc and ct1801xc creating a powerful clean & smooth, convulse sound. Ct line array ct2844x full range loudspeaker Components: 2íß md850-16ª+ + 44ti Power: 250w rms Max. Power: 500w Frequency response: 100hz-20khz Impedance: 8 ª+ Spl: 98db (1m/w) Peak sound pressure: 120db Horizontal: 100íp Vertical: Depending on array height and curvature Crossover: 2700hz Dimension: (front 272+rear178)íß363 deepíß686 high Weight: 24.6kg
Driver LF10X1 HF34X1 Impedance:8 ohm Power:200W Frequency:70hz-18khz Sensitivity:94db Long-term SPL:108db Size:570X310X310mm Tel:13751739352 www.sunyaudio.com
Hi Sir/ Madam, My name is Deven from SM recycling solutions,Malaysia. We can supply automobile scrap. 1.) Automobile Scrap (Automobile Body Cut Scraps) Origin: Malaysia (Port Klang) Spec: Fe more than 97% Mn less than 2% Volume: 1000 metric tons Shipping terms: FOB/CIF Payment terms: Bank Transfer(Payment against copy documents)
Automobile Front Fog Lamp serves as an auxiliary headlight under bad weather conditions such as dense fog, heavy rain, heavy snow, severe yellow dust, etc., and ensures the drivers' sight when driving vehicles on the road.
Eco-friendly automotive lighting are more energy efficient, longer lasting, and safer It used to check road conditions and obstacles by illuminating the front side and providing visual information to the driver during the nighttime dr
Tail Lights is the red lamps on the rear of a vehicle. They essentially maintain the vehicle's transparency to other road users, particularly in darkness. Help to minimize mishaps through enabling drivers rear to evaluate the car's position and motions.
* 400 W continuous program power capacity * 95dB Sensitivity 1w/1m * 53Hz ~4200Hz frequency response range * 2.5" voice coil with Kapton former * Ideal for compact 2 or 3-way systems *Nominal Diameter: 10 inch *Rated Impedance : 8 ohm *Nominal Power handling: 200 watts *Program Power: 400 watts *Sensitivity(lw/lm): 95 db *Frequency Range: 53~4.2 k hz *Minimum Impedance(Zmin): 7.1 ohm *Voice Coil Diameter: 2.5 inch. 4.1kg net weight.
Key Feature 1>.2-way full rang Line Array system 2>.500w, with single 2inch HF compression driver horn loaded;2 x 10inch LF cone driver 3>.Supported with a full range of flying accessories 4>.For portable use or permanent inatallation 5>.Pro circuit provides HF driver protection 6>.Distant directivity 72H x 10 V dispersion 7>.Bi-Amplifier or singal-Amplifier . Application 1>. Medium and small arenas 2>. Ballrooms and clubs 3>. Stadium and pavilions 4>. Theatre live music 5>. Auditoriums and corporate centre . Specification * Frequency Response (+3 dB): 55 Hz - 20 kHz * Sensitivity (1w/1m): 104 dB SPL * Long-term SPL: 126 dB * Maximum SPL: 132 dB * Nominal Impedance: 4 ohms * Power rated: 500 watts * Peak Power handling: 1000 watts * Nominal Dispersion: 72H x 10V * Crossover Frequency: 1.8 KHz * Dimensions (H x W x D): 320 mm x 820 mm x 550 mm * Enclosure Material: 18mm birch polywood * Surface Finished: black catalyzed polyurethane paint * Grille: 1.5mm black perforated steel framed * Net weight: 38 kg * Low Frequency Driver: 2X10"cone driver * High Frequency Driver: single 2"compression driver horn-loaded * Input Connectors: Neutrik NL4MPX4.
M series mini line array loudspeaker Introduction on c-mark mini line array loudspeaker C-mark m-series mini line array loudspeaker is a super compact system in excellent sound amplified by ultra efficient power output. Open for flexible combinations, the system can be applied to auditoriums, meeting rooms, multi-function halls, ballrooms and tour shows. Features: 1. Aesthetic outlook, ultra-compact design, small but powerful. 2. Easy installation by smart and quick connection design. The system not only fits common loudspeaker stands but also is supportive for customized fixing parts to set stable from wall or ceiling. 3. Even and wide sound dispersion is guaranteed by line array curvature adjustment. Loudspeaker performances 1. M25 loudspeaker Composed of two pieces of md535, 5ís driver and 1 piece of 1.5ís titanium tweeter hi34tid, m25 is an efficient yet in low distortion loudspeaker and parallel wave hf horn ensures precise directivity. Easy to hang up and combine different packages with built-in steel suspension riggings. Angle between two m25 loudspeakers is adjustable from 0ípto 16íp. Several m25 going with m115 the subwoofer, can cover wider area. 2. M115 subwoofer M115 is powerful driven by a 15ís woofer wlo15100x of 4ís voice coil, and can extend system lf to 40 db going with m25. M115 can be freely connected to m25 suspension combinations and enrich lf effects for m25.
Two-way passive loudspeaker system--ct101 Features: Strong mdf enclosure Molded-in 100~{!c~}x60~{!c~} High power output Flexible mounting options Applications: Live club Club installs Specifications: Frequency response: 65hz-20khz(~{!@~}3db) Low frequency limit: 50hz (-10db) Hf drivers: 1x1~{!1~} (25mm) exit compression driver Lf drivers: 1x10~{!1~} (250mm)/3~{!1~}(75mm) voice coil Rated power: 200w rms 600w peak Recommended amplifier: 150-600w Sensitivity: 97db/1m/1w Max spl: 120db continuous, 126db peak Impedance: 8 ohms Dispersion(-6db): 100~{!c~}x60~{!c~} Crossover: 2.2 khz passive Finish: textured blue, black or white, optional Grille: black perforated steel Dimensions (wxhxd): 357x480x310mm Weight: 17.6kg Dimensions (wxhxd): 357x480x310mm Weight: 17.6kg
