Nespot auto UV/IP spot varnisher Product id: SP 660/1060/1440 Using streaming feeder for easy adjustment. With double sheets detector to protect the blanket. Suction and blow of feeder head, equipment with one vacuum pump, ensure feeding paper smoothly. Can adjust pile right / left position during operation.
Ativa auto cardboard laminator Product id: CS 1207/1210/1410/1620 The system utilizing the speed difference between the faster conveying and front stopper to advance the moving paper to reach the front stopper. And the sides are synchronized to front stopper. The shifting side stoppers are used to align the two papers during moving. Price, moq, deliver time are negotiable, please contact us for correct quotation and product details.
Cosmax single knife sheeter Product id: COSMAX 1400 / COSMAX 1700 Cosmax 1400/1700 single knife sheeter.The sheeter series with modular designed to adopts synctrl twin helical knifes modular and cosmax 1400/1700 single knife modular.Direct shaft less driven of synchro-helical knife use tube shaft design to deserve high speed but low inertial. The system products accurately cut square sheets direct from the reel also capable link multi-reel to handle wide range paper sheeting material. Optional device: 1. Reject gate 2. Non-stop device 3. Cut-register 4. Splicer 5. Hydraulic roll tray carrier. Machine production speed depend paper quality and thickness. This catalog for reference only, specification subjects change without notice.
Alpha auto folder gluer Product id: AL-900/1100/1300 Alpha series was authorized to dingshung machinery co., ltd. To act for manutacture by nikko engineering ltd. That thanks to modular design the machine can be built to meet customer's requirements. Model code indication: a: alignment module; b/d: without/with prebreakers; h: crash-lock bottom module; d/f: 4/6 corner module; s: special demand machine production speed depend paper quality and thickness. This catalog for reference only, specification subjects change without notice.
Laminator, litho laminator, folder gluer, varnisher, folder gluer, sheeter, coggugator single facer, pile turner, auto cardboard laminator, auto uv/ip spot varnisher, single knife sheeter, folder gluer.
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
Aloe Vera Gel has various health benefits. Here are some of the the benefits : Soothes Skin & Heals Wounds : Aloe vera contains Natural antibacterial and analgesic properties which helps not only to reduce wound contraction but also promotes quicker healing process as it enhances the growth of regenerative skin cells. Prevents Sun Damage against harmful UV Rays and helps in treatment of sun damage such as sunburn, blemishes, dark spots, etc. Minimizes Wrinkles Aloe Vera Gel increases the production of collagen, making the skin look younger and fresh. It also enhances the elastin fibers in the skin to prevent premature aging and improve the skinâ??s overall texture. Aloe Vera gel has cohesive effects on retaining the skinâ??s lost moisture. Promotes Hair Growth Aloe Vera gel is rich in antioxidants such as Vitamin A, B12 C, and E. These help in strengthening hair and preventing hair problems such as hair loss, breakage, and split-ends. Aloe Vera is used as ingredient in manufacturing across products. Here are some examples: Cosmetic Products â?? such as make up foundations, makeup cleansers, facial creams, Skincare Products skin care cream, sunscreen, Anti-allergic Creams Hair Care products such as shampoo and conditioner. Request for Certificate of Analysis. To request for Certification of Analysis(COA)
Aloe Vera Oil has various health benefits. Here are some of the the benefits : Soothes Skin & Heals Wounds : Aloe vera contains Natural antibacterial and analgesic properties which helps not only to reduce wound contraction but also promotes quicker healing process as it enhances the growth of regenerative skin cells. Prevents Sun Damage against harmful UV Rays and helps in treatment of sun damage such as sunburn, blemishes, dark spots, etc. Minimizes Wrinkles Aloe Vera Oil increases the production of collagen, making the skin look younger and fresh. It also enhances the elastin fibers in the skin to prevent premature aging and improve the skin's overall texture. Aloe Vera gel has cohesive effects on retaining the skin's lost moisture. Promotes Hair Growth Aloe Vera Oil is rich in antioxidants such as Vitamin A, B12 C, and E. These help in strengthening hair and preventing hair problems such as hair loss, breakage, and split-ends. Aloe Vera is used as ingredient in manufacturing across products. Here are some examples: Cosmetic Products â?? such as make up foundations, makeup cleansers, facial creams, Skincare Products skin care cream, sunscreen, Anti-allergic Creams Hair Care products such as shampoo and conditioner. Request for Certificate of Analysis. To request for Certification of Analysis(COA) please email us at info@givaagro.com About us Giva Agro provides wide range of essential oils. We are a leading supplier and distributors of essential oils.. We offer more than 500 Essential Oils and 560 types of Herbal Extracts and Herbal oils. Check out of Herbal Extract Catalogue.. Our products are exclusively grown in India. Here are our strengths: Our Products are 100% Natural . They are known for their finest quality and purity. We do not use any artificial aroma or fragrances during our extraction process. We provide customized labeling and bulk packaging to our customers across Europe and Asia. with Guaranteed Best Price. #aloevera #skincare
Model No¡GM-188 UV Matt Varnish with specific molecular structure for paper coating industry. The performance of M-188 is equivalent to conventional UV varnishes, in some cases; the adhesion and scratch resistance are far more superior. Description M-188 is a UV Matt Varnish with specific molecular structure for paper coating industry. The performance of M-188 is equivalent to conventional UV varnishes, in some cases; the adhesion and scratch resistance are far more superior. Specification Appearance: Milky White Liquid Safety and Notes Storage: keep away from high temperature, high humidity and direct sun-light; keep tightly closed while storing. Product expiration: sealed, 12 months. Wear neoprene gloves and PVC chemical resistant suit and charcoal filtered mask to prevent direct contact and inhalation. If the skin is contaminated, wash with soap and water. If the slurry gets in the eyes, irrigate immediately with large amount of fresh distilled water or sterilize with 0.9% brine. Fire point: 102 (method: ASTM D92). Fire fighting material: foam or CO Package 20Kg plastic drum
Product name: Superoxide dismutase Other Name: SOD; superoxide dismutase enzyme Source:Prickly pear; Pig blood; Yak blood; Yeast INCI Name: SUPEROXIDE DISMUTASE Appearance: White freeze-dried powder Purity: 5000-50000IU CAS NO.: 9054-89-1 EINECS No.: 232-943-0 Supplier: ZHENYIBIO Superoxide dismutase(SOD) is an enzyme found in all living cells.Superoxide dismutase enzyme is a substance that speeds up certain chemical reactions in the body.Superoxide dismutase powder is taken by mouth for removing wrinkles, rebuilding tissue, and extending the length of life.Superoxide Dismutase is used in cosmetics and personal care products as an anti-aging ingredient and antioxidant because of its ability to reduce free radical damage in the skin, therefore preventing wrinkles,fine lines,age spots,help with wound healing,soften scar tissue,protect against UV rays,and reduce other signs of aging.Superoxide dismutase 1 by protecting your skin from free radical damage,superoxide dismutase prevents visible signs of aging.Superoxide dismutase sod helps repair signs of aging.It does this by promoting a youthful complexion, encouraging resilient skin.
"Book types: Kraft Notebook Relevant products: Hardcover ,Softcver book ,Children book Magazine, Catalogue, Booklet, Leaflets, Notebook, Notepad, Journal, Dairy Size: Landscape Orientation/ Protrait Orientation L�?H (cm) â?? According to Customersâ?? Specific Requirements Material: Cover: gloss artpaper (C1s/C2s), matt artpaper Inside: gloss/matt artpaper, silk paper, woodfree paper, fancy paper Color: CMYK and/ or Pantone colors (EU environmental inks) Surface Finishing: Lamination, Hot stamping, Varnishing, UV, Embossing/ Eebossing, Creasing, etc. Binding: Sewing binding, Perfect binding, Saddle stitched, Spiral binding, Mounting MOQ: Normally 1000pcs, trial order small order is acceptable Quotation details: Depends on the size, total pages, paper material, printing color and finishing"
JET FUEL A1 Spot & Contract FOB basis 80 $ to 83 $ based on quantity Procedure : TANK TO TANK FOB PROCEDURE: 1. Buyer issues ICPO with company letterhead, buyer�¢??s information, passport copy and banking information. 2. Seller issues a Commercial Invoice (CI) and Buyer signs and returns back the Commercial Invoice along with Buyer's Tank storage agreement (TSA). 3. Seller Representative visit the buyer's tank farm for TTM with a copy of the SGS and Injection Report upon verification of the copy of the SGS and Injection report, buyer and buyer's Tank Farm endorse DIP Test Authorization letter seller sends the following PPOP documents: * Certificate of Product Origin. * Letter Of Guarantee. * Statement of availability of product. * Product quality passport (Analysis test Report). 4. Seller issues Complete DTA and Tank Receipt to Buyer, Buyer order SGS to conduct a Dip Test of the product in the Seller's Tank on Buyer expenses submit the full injection report to the Buyer. 5. Upon successful Dip Test, sellers inject the fuel into the buyer lease Storage Tank and sellers submit the full injection report to the Buyer. 6. Buyer makes 100% payment by MT103 TT wire transfer for the total product and the Seller pays the commission to all intermediaries involved in the transaction within 24 hours after confirmation of the buyer's payment. 7. Seller issues draft SPA to the buyer to review for R&E monthly deliveries. 8. Buyer review and approves the SPA and issues DLC MT700or SBLC MT760 irrevocable, non-transferable, auto revolving for 12 months shipment value, Financial Instrument for length of the contract, and for each lift per schedule. Buyer pays after Dip Test by MT103 Wire Transfer each monthly quantity. 9. The subsequent delivery shall commence according to the terms and conditions of the contract. Seller pays commissions to all intermediaries as per IMFPA/NCNDA 24 hours after receiving payment from the buyer.
Model: JS-HUV-1020 Fully Automatic Stack to Stack UV(Spot)/Water Base Coating Machine. * Maximum Paper size: 1020 mm wide x 720 mm long * Minimum Paper Size: 300 mm wide x 260 mm long * Coating Range: 1020 x 720 mm * Paper Thickness: 120 ~ 450 GSM * Machine Speed: 8, 000 Sheets/min. (UV) * IR Capacity: 1kw x 24 EA * Machine Size: 10, 450 mm Long x 2, 935 mm Wide x 1, 722 mm High * Machine Weight: 12, 000 Kg * Electric Power Consumption: 78Kw
Monoblock pumps - Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features - High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP - Specially designed for wide voltage operation - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life - Back pull-out design for easy servicing and repair - Double shielded ball bearings, so no need of external lubrication - All Model fitted to Mechanical seal. specification - Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 32 Mtr. - Maximum Flow Rate : 940 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Method of Starting : Permanent Split Capacitor (PSC) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm) characteristics of clear cold water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : EN-8 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Plastic
Monoblock Pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - Mechanical seal is provided as per customers requirement Specification - Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 65 Mtr. - Maximum Flow Rate : 1450 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 100 X 80 and 100 X 100 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 mÃ?/sec (max.) - Ph Value : 6.5 to 8.5 Material of construction - motor Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminium
Falcon regenerative monoset pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - All Model fitted to Mechanical seal. specification Power Range : 0.37 Kw - 0.75 Kw (0.5 HP - 1.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 18 Mtr. - Maximum Flow Rate : 4200 LPH - Maximum Suction Lift : 8 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Direction of Rotation : Single Phase, Clockwise from driving end - Nominal Pumpset Size (Suction X Delivery) : 25mm X 25mm Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 material Of construction - Motor Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : SS-410 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : Brass Cooling Fan : Plastic
Monoblock pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. specification - Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 12 Mtr. - Maximum Flow Rate : 3160 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase - Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminum
Ghana Black Soap has many benefits over commercially manufactured soaps. One of the most common usages is to cure skin conditions and problems such as eliminating blemishes, evening out dark spots, skin rashes, removing body odors, eczema, thinning fine lines and razor bumps. After usage of this soap, the skin is looking healthy. The black soap is also used for light exfoliation of the skin. It can be used on any skin, dry or oily. There are a lot of vitamin A and E in this kind of soap because of the plantain skins. It also has a lot of iron, and it gives an excellent UV protection because of the high level of shea butter.Raw blacksoap Blacksoap with Sandalwood oil: improve skin toneBlacksoap with lavender essential oil: calming, clears acneBlacksoap with tea tree essential oil: clears acne, eczemaBlacksoap with lemongrass essential oil: brightens skin tone, smooth and healthy looking skinBlacksoap with tea tree, frankincense and Sandalwood essential oils: heals damaged skin, maintains skin texture, smoothness, and complexion.Blacksoap with lavender, Argan, apple and chamomile essential oils: kids delight, calming, protects the skin from harmful environmental factors.Our African Black Soap comes directly from Ghana. Traditionally made, this soap contains raw shea butter, virgin coconut oil and cocoa pods, a perfect combination for treating all kinds of skin conditions such as acne, eczema etc. Its color comes from the processing of its natural ingredients and its free from dyes, charcoal, artificial perfume and derivatives. This raw African black soap bar gets you looking your best fast. Tired of the products that are all hype and dont work? Smooth and repair your skin, plus reduce wrinkles and fight aging the natural way! You wont be disappointed - Multi purpose-body wash and hair wash- Make-up remover and facial wash- Gentle on sensitive and problematic skin- Suitable for all skin types and ages(newborns to seniors)- Contains 100% natural ingredients Gender: For Him and Her Soap Type: Bar Consistency: Solid Type of skin: Oily and Dry skin
Item: white art board + corrugated paper +kraft paper pizza box Size: 6 inch, 7 inch, 8 inch, 9 inch, 10 inch, 12 inch or as per clients' requirement. Regular Material Structure: Outer liner: white cardboard, coated paper, art paper, duplex paper, fancy paper, recycled paper etc. Inner liner: corrugated (ripple wall)paper, kraft paper, special paper etc. Or as per clients' demand. Material weight: as per client's demand. Logo/printing design: With printing or not. As per clients demand. Printing technology: CMYK litho printing, pantone color printing, flexo-printing, UV printing or as per clients request. Finish Processing: Glossy or Matte Varnish, Glossy or Matte Lamination, Gold or sliver stamping, Spot UV, Embossed, Creasing, etc. Reference dimension: 6/7 inch: W 18.5 cm X L 18.5 cm X H 4.5 cm 8 inch: W 20 cm X L 20 cm X H 4.5 cm, W 21.5 cm X L 21.5 cm X H 4.5 cm 9 inch: W 24 cm X L 24 cm X H 4.5 cm 10 inch: W 27 cm X L 27 cm X H 4.5 cm 12 inch: W 32 cm X L 32 cm X H 4.5 cm
Item: 100% food grade kraft + ripple wall paper +kraft paper pizza box Size: 6 inch, 7 inch, 8 inch, 9 inch, 10 inch or as per clientsâ?? requirement. Regular Material Structure: Outer liner: white cardboard, coated paper, art paper,duplex paper,fancy paper,recycled paper etc. Inner liner: corrugated (ripple wall)paper, kraft paper, special paper etc. Or as per clients' demand. Material weight: as per clientsâ?? demand. Logo/printing design: As per clients demand. Printing technology: CMYK litho printing, pantone color printing, flexo-printing, UV printing or as per clients request. Finish Processing: Glossy or Matte Varnish, Glossy or Matte Lamination, Gold or sliver stamping, Spot UV, Embossed, Creasing, etc. Reference dimension: 6/7 inch, W 18.5 cm X L 18.5 cm X H 4.5 cm 8 inch, W 20 cm X L 20 cm X H 4.5 cm, W 21.5 cm X L 21.5 cm X H 4.5 cm 9 inch, W 24 cm X L 24 cm X H 4.5 cm 10 inch, W 27 cm X L 27 cm X H 4.5 cm 12 inch, W 32cm X L 32 cm X H 4.5 cm
