Armored Fiber Cable Suppliers and Manufacturers

armored fiber cableï¼? 1-coreï¼? armored FTTX cableï¼? base station Item Unit Dimention Optic fiber mm 0.60±0.05 Spiral armored layer mm 1.2±0.10 Aramid yarn decitex 1100 Outer jacket mm 2.0±0.10 Applications Used in FTTX, from residence to data center and cabling level and vertical, also used in FTTH cable Used in communications in data center, during ODF with armored patch cord and pigtail Used in the open field, connections between optical equipment Used in base station, for BBU to RRU Features Mini armored layer used to decrease the outer diameter and cable weight, also convenient for cabling and installation. Cable using high property aramid yarn, increasing tension property, and fit for long distance application. Cable using spiral metal armored layer with best crush property, and cable is very flexible and easy bend PE/PVC/LSZH/PU jacket material fit for different environments.

Our armored patch cord can be customized. SC/LC/ST/ waterproof connectors can be assembled with armored fiber cable

The fibers, 125μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A Fiber Reinforced Plastic (FRP) locates in the center of core as a non-metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core. Then the cable core is covered with a thin polyethylene (PE) inner sheath, which is filled with jelly to protect it from water ingress. After a corrugated steel tape armor is applied, the cable is completed with a PE outer sheath.

Amroed fiber optic cable is base on the odinery fiber optic cable,between kavler and fibers,there spriral metal tube to protect the fibers,protect fiber from animal bite and Dragging, hitting or pressing . Cable Specification: Cable OD:2.0mm3.0mm,4.8mm Cable Jacket:LSZH,TPU,PVC Cable type:Single mode ,Multimode MAXIMUM TENSILE: S.T.600,L.T.300 (3.0mm fiber cable) Features: *Metal tube protected your high speed network *Avoid damage from animal bit *Good mechanical and Environmental characteristics * High tensile and stress coefficient *Soft, flexible, Stable, easy to splice *Improve existing function based on customersâ?? various requirements *Fit all kinds of connectors:.FC,ST,LC,MU.MTRJ,E2000 â?¦etc *high density cabling Applications *Pigtails and patch cords *Connections of optical communication equipment rooms, distribution frames and FTTX *Optical appliances connection *Indoor horizontal or vertical cabling, multi-medium connection, LAN *Connections of long distance, outdoor, building cabling, combination cabling of fiber optic and electronic *with metal braiding or not Options *Fiber Type:Single-mode fiber G652 G657, G655, Multimode fiber 50/125, 62.5/125, OM3..etc. *Jacket Material: LSZH, PVC, LSZH, TPU, ETFE etc *Jacket Color:Blue,Black,Aqua,Yellow,Red, Grey,White orother requirements:

Description In the GYTA cable, single-mode/multimode fibers are positioned in the loose tubes, the tubes are filled with water blocking filling compound. Tubes and fillers are stranded around the strength member into a circular cable core. An APL/PSP is applied around the core. Which is filled with the filling compound to protect it. Then the cable is completed with a PE sheath. Application: Duct/Aerial Note: 1.Cables can be supplied with a range of single mode or multimode fibers. 2. The dimensions and raw materials can be designed according to the demand of the customers. 3. Standard Reel Length: 3000m/reel: other lengths available on request. If you need gyta fiber cable,please contact us. www.ksdfibercable.com Email:selia@ksdcable.comCable

Armored patch cable can be deployed directly in different harsh environment, without additional tube for protection, save space, reduce construction cost, and make the maintenance more conveniently. This armored fiber optic cable is constructed with highest quality components for unmatched durability and reliability. With a standard boot on each end, this cable is appropriate for use in data centers and networks with 10G FC applications. With OFNR (Riser)/OFNP(Plenum) and 3.0mm thickness, this Armored Fiber Optic cable is specifically designed for light to medium duty indoor/outdoor applications. Its rugged shell with steel and kevlar is 10 times stronger than regular Fiber Optic Cable and has a 40% higher rated range of operating temperature. Deploy this cable in environments where networking equipment undergo repeated abuse.

The coloring fibers are positioned in a central loose tube. The PSP is longitudinal covering. Parallel steel wire is inside the PE sheath. Between steel strip and loose tube is filled with a water-blocking compound. Characteristics: Good mechanical and temperature resistant performance. Crush resistance, water blocking and flexibility Geometrical Characteristics: Number of Fibers 2-12 Cable Diameter (mm) 9.8 Cable Weight (kg/km) 110 Mechanical Characteristics: Max Load (N) Long Term 600 Short Term 1500 Crush Resistance (N/100mm) Long Term 300 Short Term 1000 Bending Radius (MM) Dynamic 100 Static 200 Fiber Cladding: Fiber Type (core/cladding dimension) 8.3/125, 50/125, 62.5/125 Transmission Characteristics: SMF 50/125 62.5/125 1310/1550(nm) 850/1300(nm) 850/1300(nm) Max. Attenuation (dB/km) 0.45/0.30 3.5/1.5 3.5/1.5 AVG. Attenuation (dB/km) 0.40/0.25 3.0/1.0 3.0/1.0 Min. Bandwidth (MHz/km) 400/400 160/500 Environmental Characteristics: Storage/Operating Temperature -40íµí½+70íµ

Marble, granite, stones, slates, tiles, power cord, wires, cables , cable assemblies, tyre scrap, used tyres, steel tire wire scrap, firewoods, pistachios, hazelnuts, textiles.

NATURAL SISAL FIBER AND YARN OF KENYAN ORIGIN 1.sisal fiber from best sisal hemp 2.SSUG/UG/Polished grades 3.best service and best price SUITABLE FOR -Gypsum -Cove Decorative -Molding -casting -plaster architectural moldings -casting Gypsum & Fixing GRG ETC...... Sisal ORIGIN: KENYA color: natural white, cream and between white and cream. - length: 110-130 cm - bales of 100kg and 250 kg - 28 ton container/40 foot container - Grade A (UG) Grade- UG Purity: 98-99.5 % min Foreign matter: 0.5% Humidity :10 -13%+

Product description This product description is for 08 fiber single mode double armored optical fiber cable designed to meet the technical requirements as mentioned as per specification documents, it fulfills the design for the applications desired therein. The design is based on stranded loose tube which provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. This cable is suitable for both duct and direct buried applications, it provides extra strength and rodent protection by using double armor and two inner coats. The stranded loose tubes contain thixotropic jelly for protection of the optical fibers as required. The thixotropic jelly protects the fibers within the loose tubes and provides excellent quality filling compound for stopping ingress/transport of water into the cable. The product is manufactured on itu-t g.652.D fiber. It facilitates easy and economical installation. Features & application Excellent optical, mechanical & environmental performance High strength-to-weight ratio Csm dielectric type v fiber reinforced plastic Dry block construction High tensile strength High crush strength Corrosion resistance Kink resistance Very light weight Very flexible & small bending radius Long haul / backbone application Junction communication systems All dielectric applications Catv applications. Construction parameters Fiber count as per customer¦s requirement No. Of loose tube to be designed to meet the specifications No. Of fiber in each tube to be designed to meet the specifications. Color of fibers as per tia/eia-598a Loose tube material polybutylene terephthalate (pbt) Loose tube filling material thixotropic jelly Central strength member fiber reinforced plastic (frp) v non metallic Core moisture protection methodology jelly filled construction Peripheral strength member glass yarn material medium density/high density polyethylene (mdpe/hdpe).