Arm Type Constant Acceleration Tester Suppliers and Manufacturers

Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details

The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.

Shubhlaxmi Industry is the manufacturer and exporter of premium quality of cumin seeds to India and across the world. We deliver high quality cumin seeds to our customers and we never compromise for the same. We are the pioneer exporter of cumin seeds globally and we believe in achieving customer satisfaction through our constant efforts to keep up the quality. We bring you totally safe and nutrient rich, naturally harvested cumin seeds that are best for your use. Cuminum cyminum is the botanical name of Cumin seeds. They belong to the family Apiaceae. They are dried, white fruits having graying yellow color and look slender. It is a flowering herb. The seed looks like fruit that is elongated with warm flavor and bitter to taste. Cumin seeds are commonly known as Jeera. It is a condiment that is generally used in making curry powder. It is a basic and key ingredient for tempering Indian food dishes. Cumin seeds are grounded to make buttermilk powder too. A cumin seed affects your overall health as they have many health benefits. They are good for digestion, they boost immunity. They are good for skin. They work well against acidity. It is a rich source of Iron and Manganese. Specification HS Code : 09093129 Type : Singapore Standard & Europe Standard Quality : 97%/98%/99%/99.5% & Sortex Clean Color : Brownish Moisture : 10% Max Admixture : 1-2%,max Flavour aromatic With A Penerating Flavour Total Ash : 9-10% Max Acid Insoluble Ash : .75% Salmonella absent/25gms Origin : Gujarat,rajasthan,uttarpradesh Packing : 5/15/25/50 Kg Net Pp Bag/ Jute Bag/ Cartoon Quality Assurance : Sgs,geo-chem, Bureau Veritas Loading Capacity : 13mt In 20'fcl & 26mt In 40'fcl

Tortilla Taco Chapati Roti Roasted duck bread thin bread Arabic bread making machine,1row ,2row customized 1. One side of this machine into the material and another side continuous out of bread,which does not need manual operation and has the characteristics of constant temperature baking and uniform fire color. 2. This machine has the mechanical and electrical integration of CNC regulation system, with the characteristics of small noise, high efficiency, low energy consumption and simple operation. Just need one person can operate. 3. The machine has a delicate construction, the material enter system work smoothly and not easy to make mistakes,the disassembly and cleaning is also very convenient. 4. The taste, diameter (8-50cm) and thickness (0.3-3mm), as well as color, speed of this machine can be adjusted at will. 5. Compared with traditional hand-made round bread, the products making by this machine with more regular shape, brighter color and stronger taste, which can be stored in low temperature for one month (frozen storage lasts for one year). 6. Imitation hand rolling bread, green food, without any additives. 7. This Machine can be made: Tortilla, Taco, Chapati, Roti,Single Round Bread, Roasted duck bread and so on. Application: This kind of new type automatic chapati making machine is widely used in organs, factories , school, hotel ,restaurants,etc food sectors.This machine can make waffle, pizza, thin bread,pancake, roti, chapati, tortilla etc,s very famous around the world Keywords : Tortilla Taco Chapati Roti Roasted duck bread thin bread making machine Tortilla Taco Chapati Roti Roasted thin bread making machine

Tortilla Taco Chapati Roti Roasted duck bread thin bread Arabic bread making machine 1. One side of this machine into the material and another side continuous out of bread,which does not need manual operation and has the characteristics of constant temperature baking and uniform fire color. 2. This machine has the mechanical and electrical integration of CNC regulation system, with the characteristics of small noise, high efficiency, low energy consumption and simple operation. Just need one person can operate. 3. The machine has a delicate construction, the material enter system work smoothly and not easy to make mistakes,the disassembly and cleaning is also very convenient. 4. The taste, diameter (8-50cm) and thickness (0.3-3mm), as well as color, speed of this machine can be adjusted at will. 5. Compared with traditional hand-made round bread, the products making by this machine with more regular shape, brighter color and stronger taste, which can be stored in low temperature for one month (frozen storage lasts for one year). 6. Imitation hand rolling bread, green food, without any additives. 7. This Machine can be made: Tortilla, Taco, Chapati, Roti,Single Round Bread, Roasted duck bread and so on. Application: This kind of new type automatic chapati making machine is widely used in organs, factories , school, hotel ,restaurants,etc food sectors.This machine can make waffle, pizza, thin bread,pancake, roti, chapati, tortilla etc,s very famous around the world Keywords : Tortilla Taco Chapati Roti Roasted duck bread thin bread making machine Tortilla Taco Chapati Roti Roasted thin bread making machine

Mexico Tortilla Taco Chapati Roti Roasted duck bread thin bread Arabic bread making machine 1. One side of this machine into the material and another side continuous out of bread,which does not need manual operation and has the characteristics of constant temperature baking and uniform fire color. 2. This machine has the mechanical and electrical integration of CNC regulation system, with the characteristics of small noise, high efficiency, low energy consumption and simple operation. Just need one person can operate. 3. The machine has a delicate construction, the material enter system work smoothly and not easy to make mistakes,the disassembly and cleaning is also very convenient. 4. The taste, diameter (8-50cm) and thickness (0.3-3mm), as well as color, speed of this machine can be adjusted at will. 5. Compared with traditional hand-made round bread, the products making by this machine with more regular shape, brighter color and stronger taste, which can be stored in low temperature for one month (frozen storage lasts for one year). 6. Imitation hand rolling bread, green food, without any additives. 7. This Machine can be made: Tortilla, Taco, Chapati, Roti,Single Round Bread, Roasted duck bread and so on. Application: This kind of new type automatic chapati making machine is widely used in organs, factories , school, hotel ,restaurants,etc food sectors.This machine can make waffle, pizza, thin bread,pancake, roti, chapati, tortilla etc,s very famous around the world

M. oleifera is a fast-growing, deciduous tree that can reach a height of 10 -12 m (32- 40 ft) and trunk diameter of 45 cm (1.5 ft). The bark has a whitish-grey colour and is surrounded by thick cork. Young shoots have purplish or greenish-white, hairy bark. The tree has an open crown of drooping, fragile branches and the leaves build up a feathery foliage of tripinnate leaves. The flowers are fragrant and hermaphroditic, surrounded by five unequal, thinly veined, yellowish-white petals. The flowers are about 1.0 - 1.5 cm (1/2) long and 2.0 cm (3/4) broad. They grow on slender, hairy stalks in spreading or drooping flower clusters which have a length of 10 -25 cm. Flowering begins within the first six months after planting. In seasonally cool regions, flowering only occurs once a year between April and June. In more constant seasonal temperatures and with constant rainfall, flowering can happen twice or even all year-round. The fruit is a hanging, three-sided brown capsule of 20 - 45 cm size which holds dark brown, globular seeds with a diameter around 1 cm. The seeds have three whitish papery wings and are dispersed by wind and water. In cultivation, it is often cut back annually to 1 - 2 m (3 - 6 ft) and allowed to regrow so the pods and leaves remain within arm' s reach.

M. oleifera is a fast-growing, deciduous tree that can reach a height of 10 - 12 m (32 - 40 ft) and trunk diameter of 45 cm (1.5 ft). The bark has a whitish-grey colour and is surrounded by thick cork. Young shoots have purplish or greenish-white, hairy bark. The tree has an open crown of drooping, fragile branches and the leaves build up a feathery foliage of tripinnate leaves. The flowers are fragrant and hermaphroditic, surrounded by five unequal, thinly veined, yellowish-white petals. The flowers are about 1.0 - 1.5 cm (1/2) long and 2.0 cm (3/4) broad. They grow on slender, hairy stalks in spreading or drooping flower clusters which have a length of 10 - 25 cm. Flowering begins within the first six months after planting. In seasonally cool regions, flowering only occurs once a year between April and June. In more constant seasonal temperatures and with constant rainfall, flowering can happen twice or even all year-round. The fruit is a hanging, three-sided brown capsule of 20â??45 cm size which holds dark brown, globular seeds with a diameter around 1 cm. The seeds have three whitish papery wings and are dispersed by wind and water. In cultivation, it is often cut back annually to 1 - 2 m (3 - 6 ft) and allowed to regrow so the pods and leaves remain within arm's reach.

M. oleifera is a fast-growing, deciduous tree that can reach a height of 10 - 12 m (32 - 40 ft) and trunk diameter of 45 cm (1.5 ft). The bark has a whitish-grey colour and is surrounded by thick cork. Young shoots have purplish or greenish-white, hairy bark. The tree has an open crown of drooping, fragile branches and the leaves build up a feathery foliage of tripinnate leaves. The flowers are fragrant and hermaphroditic, surrounded by five unequal, thinly veined, yellowish-white petals. The flowers are about 1.0 - .5 cm (1/2) long and 2.0 cm (3/4 ) broad. They grow on slender, hairy stalks in spreading or drooping flower clusters which have a length of 10 - 25 cm. Flowering begins within the first six months after planting. In seasonally cool regions, flowering only occurs once a year between April and June. In more constant seasonal temperatures and with constant rainfall, flowering can happen twice or even all year-round. The fruit is a hanging, three-sided brown capsule of 20â??45 cm size which holds dark brown, globular seeds with a diameter around 1 cm. The seeds have three whitish papery wings and are dispersed by wind and water. In cultivation, it is often cut back annually to 1 - 2 m (3 - 6 ft) and allowed to regrow so the pods and leaves remain within arm's reach.

Due to deep knowledge of the industry we are offering a wide range of Layer Chicken Concentrate 30 to our customers The offered products are prepared with topgrade inputs  In adding to this a quality tester team tests these feeds on quality provisions for delivering the errorfree range Ingredients Corn Gluten Meal Wheat Gluten Soy Meal DDGS Pluses Essential Amino Acids Vitamins Minerals Trace Minerals Toxin Binders and Mold Inhibitor Product Details Crude Protein 35 Maximum Crude Fat 3 Maximum Phosphorous Total 16 Maximum Product Form Coarse Mash Form Pellet Form Product Branding HAF Net Weight 39 Kgs When Packed Product Type Chicks Meal Packaging Type P Bags Form Pallets Ingredient Profile 100 Vegetarian Calcium 3 Maximum Moisture 12 Maximum Application Poultry

1, Safe working load: 200kg 2, The back board folding angle: 70 3, The thigh board folding angle: 30 4.TR/ATR:0-20 5, The four motors automatically realize various positions. The motors are selected from internationally renowned brand Timotion, which are safe and noiseless. 6, Two control methods, operation handle control and guardrail built-in button operation, control handle is clear and easy to operate; built-in buttons on the side rail near headboard, graphic display, clear at a glance. The key has lock function, which reduces the probability of misoperation and locks safely. 7, Side rail: 1),Two side rail in each side of bed. 2),It can be automatically locked when raising, and each guardrail can bear more than 50KG. 3), Guardrail safety switch design, placed under the guardrail to avoid misuse of the patient; 4), Equipped with gas spring for easy operation. 5), The steel structure of the guardrail base is welded on the bed to ensure safety. 6), The 4-pieces guardrail has angle indicator that allows the caregiver to quickly and easily adjust the backrest angle and TR/ATR angle of the bed. 7),It equipped with guardrail built-in button to make it easier for the patient to operate the bed. 8, Casters 1), The four casters use 125mm center control one. 2), Steel structure, precision ball bearings are placed in the rotating head and the caster, the caster frame is equipped with a wheel cover made of synthetic material, suitable for locking the lever with a cam hole. Caster surface material: polyurethan, passed EN 12531 standard, single dynamic (force) load is not more than 175 kg, static load is not more than 200 kg 3),Braking system: Pedal-type synchronous braking arms on both sides of the bed, adopting all-metal structure, compact structure and reliable braking. 9, Shank board can be adjusted manually by simple steel support for convenience position. 10, At the 4 corners of the bed, there is an diameter HDPE anti-collision wheel which intergated on H/F board. 11, There are 1 hook in each side for drainage bag. 12, It equipped with manual CPR for emergency treatment.

Solid wood arm chair with black and white upholstery Price - Rs 52,500/ Piece Primary Material : Oak Wood Cushioned Seating : With Cushion Armrest Available : With Armrest Cushion Seat Material : Fabric- Black and white Appearance : farmhouse style Wood Finish Type : Matte Back Type : comfortable back rest with cushion Material : Teak Wood Solid wood arm chair with stripped black and white fabric upholstery. White Cushion included. Any customisation can be done according to requirements of the interior designer or buyer.

Price - Rs 64,300/ Piece Seat Material : Fabric Arm Type : With Armrest Back Type : Medium Back Cushion : Seat & Back Cushion Color : Grey Appearance : Modern Customization : Available Base Style : Stationary Chair Set : Set of 1 Relax lounge chair with wooden stick detail on the back with wooden armrest that envelopes the back. Any customisation can be done according to requirements of the interior designer or buyer

Textured fabric armchair with solid wood legs Price - Rs 45,000/ Piece Frame Material : Wood Seat Material : Fabric Arm Type With : Armrest Seat Material : Fabric Cushion : Seat & Back Cushion Back Type : Medium Back Textured fabric armchair with solid wood legs.Any customisation can be done according to requirements of the interior designer or buyer

Price - Rs 55,000/ Piece Frame Material : Wood Seat Material : Fabric Seat Material : Fabric Cushion : Seat & Back Cushion Color : White Arm Type : Armrest Base Style : Stationary Appearance : Modern Seat Shape : Square Rattan calcutta wooden dining chair with white upholstery. Any customisation can be done according to requirements of the interior designer or buyer

ECG cables also referred to as an ECG patient cable, is a type of cable connection designed for non-invasive heart monitoring, typically used to help diagnose potential heart issues. The ECG cable connects to electrodes which are positioned at specific locations on the patientâ??s body to detect and record heart muscle electrical activity. The cables then transmit the electrical activity back to the ECG device for analysis and diagnosis by medical professionals. ECG Cable Feature [Multiple Leads]: ECG cables usually have several leads placed in specific areas on the patientâ??s body, such as the chest, arms, and legs, to measure the heartâ??s electrical activity from different angles. [Durability]: ECG cables are constructed from top-quality, sturdy materials that can endure repeated bending, tugging, and twisting without sustaining any damage. This ensures that the cables can withstand the rigors of frequent use and remain reliable over time. [Shielding]: ECG cables are shielded to block out external electrical signals, which can interfere with the accuracy of the readings. [Connector Compatibility]: The ECG cables are available with various connector types, including snap, clip, and banana, to fit different types of ECG machines. [Safety]: ECG cables are designed to meet strict safety standards and regulations to ensure patient safety. This helps to ensure that patients are protected from any potential harm during the monitoring process. [Cleaning and Disinfecting]: The ECG cables are easy to clean and disinfect to maintain hygienic conditions, as they come into contact with the patientâ??s skin. ECG Cable Advantages [Excellent Performance]: ECG cables are built to withstand the rigors of twisting and bending, and have been thoroughly tested to ensure optimal performance. The cables are also equipped with electrical shielding to protect the signal integrity, ensuring accurate readings. [Non-Invasive]: ECG cables are non-invasive, which means that they do not require any incisions or invasive procedures. This reduces the risk of infection and makes the monitoring process much safer for patients. Instead, the cables are simply attached to the patient's skin, making it a quick and painless process.