Average lump size 3 to 8 inches Lump size 3-8 inches.
Antimony Ore.
lithium ore antimony ore copper ore.
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00
Cast iron skulls, cast iron borings and turnings, steels skulls, eaf skulls, plate iron, mill scale, metal scrap, incinerated scrap (e46).
Various types of machinery and production lines. tires and accessories for cars, motorcycles and tractors,ships. food and additives. minerals, metals and alloys. medical equipment, chemicals..
Copper ore.
Plant food products : sugar, wheat, corn. soybeans, rice animal food products : chicken, chicken feet, chicken paws, beef, pork. fertilizers: urea 46, nitrogen, phosphate, potassium mineral ores : iron, copper, manganese, zinc. .
Cenospheres (aluminosilicate microspheres) are hollow aluminosilicate glass ceramic beads ranging in size from 400-500 microns 20-50mkm (most often from 100 to 250 microns), which are formed during high-temperature combustion of pulverized coal. The chemical composition of the main component of the cenospheres is silicon oxide SiO2 (45-60%), aluminium oxide Al2O3 (15-40%), iron oxide Fe2O3 (1.0-10%), calcium oxide CaO (1.5- 4.5%), potassium oxide K2O (2.0-4.5%) and other certain oxides that make up the balance of the content are typically less than 1.0%. Due to the unique set of physical and chemical characteristics of the cenospheres, they are used in the manufacturing of various composite materials. They are used in solving technical issues that require: reduction in the weight material with a low thermal conductivity, high strength, volume efficiency, increased resistance to erosion and aggressive environments.
Mineral Ores.
Industrial Supplies, Minerals.
Light paraffin oil n60 & n40, white spirit, pvc resin, high purity zircon sand, methanol, base oil, linear alkyl benzene, hdpe, vinyl acetate monome xylene, bitumen | asphalt | tar, ethanol, ammonium nitrate, crude iodine prills, mono propylene glycol, mono ethylene glycol, hexylene glycol, di ethylene glycol,di propylene glycol ,n butyl acetate, methylene chloride, dot 3 brake fluid variations, antifreeze c3053, n butanol, isobutanol, ethyl acrylate,ethyl acetate, caustic soda (sodium hydroxide), caustic potash (potassium hydroxide), butyl acrylate, aluminum sulfate, pure cow ghee, petroleum jelly, urea 46% granular & prilled fertilizer, anhydrous citric acid, boric acid, white spirit, xylene , soda ash dense , copper wire.We export deals in export of paraffin wax, caustic soda, hdpe, ldpe, sunflower oil, copy papers, charcoal, corn, soybeans, beans, used oil, chemicals, fresh fruits, oranges, apples, grapes, pomegranates, chicken, frozen meat, lldpe, pet flakes,
Iron ore siderite 87% lump and iron ore hematite 95.4% lump..Export
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.
We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag : 1. >85% Fe Average 600mm Max Fraction 2. >78% Fe Average 20-300mm Fraction The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact