Antifreeze Suppliers and Manufacturers

To be used in car radiator tank. Protects from corrosion and cold, increases boiling degrees. Does not damage plastic, rubber and metals. It protects metal parts against corrosion. Organic Antifreeze Available for size 1.5 Litre 3 Litre Pcs in Box : 12 Pcs

Seahorse Antifreeze is used to prevent freezing of the cooling water at all gasoline and diesel engines for four seasons. Its formula is based on mono-ethylene glycol combined with special additives for superior properties. It prevents freezing of the engine by lowering the freezing point of cooling water in cold climates. But also it prevents boiling of radiator water in hot days by increasing the boiling points of radiator water. Therefore it provides perfect performance of radiator water at all climates and all road conditions. Features / Benefits •Does not corrode metal parts and hoses. •Enhances the efficiency of the cooling water by preventing corrosion and electrolyses •Lowers the engine temperatures and helps high performance operation of the engine. •Helps water circulation pump work efficiency. •Prevents formation of cracks and other damages on the radiator due to cold climates. •Prevents corrosion and foaming inside the cooling system.

Protects all metal and aluminium engines from overheating and corrosion. High protection. Advanced molecular composition for rapid heat dissipation. Special composition significantly the boiling point of water and has excellent antifreeze properties. Not soluble used as it is.

With its long service capacity, it can reduce cost to a important point. Product has continuous capacity until -45 degree. It has superior corrosion protection, with its special additive technology, it prevents calcium residue due to hard water. Does not contain, amines, phosphates, nitrites, glucose, silicates, and it has superior performance on cast iron or aluminum alloy cooling systems. Directions: Dilute 1:1 ratio with water. (%50 water, %50 antifreeze). In extreme cold, to maximize protection from freeze, %60 antifreeze and %40 water can be used. (3:2 ratio) It's not recommended to use over %67 or less than %40 antifreeze-water mixture. Warning: Avoid eye and skin contact, if contacted, wash with plenty of water. Keep far away from children. If swallowed, consult to the closest health center. Do not mix with other chemicals. Storage Conditions: Storage in dry, room temperature rooms and avoid from direct sun light.

Car antifreeze 5.Concentrated glycoxol® plus long life antifreeze –( protection - 30° c diluted in water 1/1).5 year/300.000 km warranty; follows the g12+ protocol color: red recommended for: vw, audi, mercedes, ford, renault, skoda, dacia, opel, fiat, man, scania, iveco, etc. Price: 1 l bottle 2.9 usd/bottle; 12 pcs/box. 3, 5, 10, 20, 60, 220 l packages 2.8usd/l Demineralized water price: 1 l bottle 0.6 usd/bottle. For 5, 10 l packages 0.5 usd/l *prices do not contain vat Minimum order: one forty foot container

By an inhibitor in its formula Domix Antifreeze protects your radiators at winters to freeze, at summers to over heat. Domix Antifreeze, also helps to avoid rust and corrosion formation at your older vehicle motor radiators (car, trucks etc.) by preventing breakdowns before motor system components’ physical life. Consequently by using our antifreeze you can achieve 3 different protection for your radiators.Domix Antifreeze formula doesn’t contain nitrite, amine and phosphate. Domix Antifreeze is producted in packages of 1 lt, 3 lt, 200 lt drum and 1000 lt IBC tank.

It is confidently used both in gasoline and diesel engines water-cooled systems during summer and winter. While it is used pure, it prevents engine freezing until -55 C during winter and rising boiling temperature until +126 C during summer. It protects cooling system against rust, lime and corrosions. It does not harm trunks, joints or engines.

It is confidently used both in gasoline and diesel engines water-cooled systems during summer and winter. While it is used pure, it prevents engine freezing until -55 c during winter and rising boiling temperature until +126 c during summer. It protects cooling system against rust, lime and corrosions. It does not harm trunks, joints or engines.

Antifreeze coolant in concentrate form for all passenger cars 500ml, 1 ltr, 2 ltrs, 5 ltrs, 20 & 200 ltrs barrels

Antifreeze coolant in ready to use form for all passenger cars 500 ml, 1 ltr, 3 ltrs, 5 ltrs, 20 & 200 ltrs barrel

Coolant - antifreeze KL-A40M" intend for using in cooling system of petrol engine and diesel engine internalcombustion engine of all types vehicle. It is preserve necessary for operating envelope of temperature from 400C to + 1100C. Coolant - KL-A40M characterized by high performance attributes and represents optimal composition first-class monoetylenglikol highpurity, demineralized water and by unique complex anti-foam additives and additives-inhibitors, which averted rust formation and metal corrosion (copper, steel, aluminium, cast iron, brass, solder). High-efficient additives antifreeze parcel KL-A40M provides cooling system protection from incrustation, corrosion, heightened depreciation, cavitation, prevent from rubber swelling. Product not carries phosphates, amines, nitrites.

DYNOPET ANTIFREEZE is an high quality ethylene glycol based silicate and borate free antifreeze containing special additives which provides freeze protection down to -49F (-45C). The long life formula provides protection for all cooling system metals from rust and corrosion. The silicate free, borate free formula helps protect against harmful scale and deposits. Corresponds to approvals / specifications / products: - ASTM D3306, ASTM D4340, ASTM D4985 - SAE J1034 - NATO S759 - VAG TL 774 C (G011 A8C A1)

We are supplying Coolant Antifreeze as the country specification with high quality performance

antifreeze coolant works upto -45 temprature

Product overview This product is combined naphthalene high efficiency water reducing elements with several types of accelerating and anti-freezing components. It is mainly applied in pumping concrete manufactured in winter constructions. This product meets GB8076 and JC473 first-class standard. Benefits Efficiently decrease the freezing point of free water in concrete Accelerate the hydration of concrete in cold weather; enhance the early stage strength of concrete and anti-freezing ability Improve the flow ability workability and pumpability of concrete Small rate of slump loss, no segregation, no bleeding Improve the strength of concrete in every state and increase the duration after hardening. Improve impermeability, anti-freezing ability and durability Low level of alkalis, no corrosion to the steel structures Areas of Application All types of pumping concrete and commercial concrete in winter constructions. Commercial concrete and large-scale concrete structures, such as highway, railway, bridge, harbor, industrial and civil facility projects Applicable condition: NOF®-D1: rated temperature ¡Ý -15¡æ; outdoor temperature ¡Ý -20¡æ NOF®-D2: rated temperature ¡Ý -10¡æ; outdoor temperature ¡Ý -15. Method and cautions Dosage (total cementitious materials): Powder 2.0~3.0%, Liquid 2.0~3.0% Powder admixture can be added with binding materials, liquid with mixing water. Increase mixing time properly. Hot water helps to improve its performance. In winter constructions, no ice, snow or freezing elements in aggregate materials. Raw materials should be pre-heated if possible. After pouring, cover plastic film and enhance thermal insulation curing. The optimum mix design needs to be determined by the requirements of the project, specialties of materials and mixture tests before usage. The feasibility of combination with other admixtures needs to be conformed by mixture tests. This powder product is packed into plastic knitting bags, 50 kg/bag; the liquid product is packed into plastic barrel, 200~250kg/BBL or transported by tankers. During storage, it needs to be prevented from moist, broken packed and high temperature. The effective duration is one year. Expired product needs to be determined by tests. This product is not inflammable or explosive and need to be well kept.

Product overview This product is combined several types of anti-freezing organic and inorganic anti-freezing components with accelerating components. It is mainly applied in fresh concrete and precast concrete units in winter constructions. This product meets JC473 standard. Benefits Efficiently decrease the freezing point of free water Accelerate the hydration of concrete in cold temperature; enhance the early stage strength of concrete and anti-freezing ability. Characteristics of accelerating, enhancement, water reducing and air-entraining Can function as early strength admixture Improve the physical mechanic ability and duration index of concrete. Low level of alkalis, no corrosion to the steel structures. Areas of Application All types of pumping concrete and commercial concrete in winter. Commercial concrete and large-scale concrete structures, such as highway, railway, bridge, harbor, industrial and civil facility projects Can be combined with water reducers to manufacture plasticizing and pumping concrete. Applicable condition: NOF®-D3: rated temperature ¡Ý -15¡æ; outdoor temperature ¡Ý -20¡æ NOF®-D4: rated temperature ¡Ý -10¡æ; outdoor temperature ¡Ý -15¡æ Method and cautions Dosage (total cementitious materials): Powder 2.0~3.0%, Liquid 2.0~3.0% Powder admixture can be added with binding materials, liquid with mixing water. Increase mixing time properly. Hot water helps to improve its performance. In winter constructions, no ice, snow or freezing elements in aggregate materials. Raw materials should be pre-heated if possible. After pouring, cover plastic film and enhance thermal insulation curing. The optimum mix design needs to be determined by the requirements of the project, specialties of materials and mixture tests before usage. The feasibility of combination with other admixtures needs to be conformed by mixture tests. This powder product is packed into plastic knitting bags, 50 kg/bag; the liquid product is packed into plastic barrel, 250kg/BBL or transported by tankers. During storage, it needs to be prevented from moist, broken packed and high temperature. The effective duration is one year. Expired product needs to be determined by tests. This product is not inflammable or explosive and need to be well kept.

It is suitable for all kinds of concrete that needed to be constructed under the degree of -5 to -15.It has the features of antifreezing, early strengthening, water reducing, plastic securing and so on. There is less loss in slump, good adaptability to a variety of cement and mixed materials. It is of chlorine-free and low-alkali, non-ammonia type and without harmful substances, no rust on the steel, and considered as a environmentally friendly products. 25Kg, Bags

Ethylene glycol antifreeze Coolants109680 ltrs Hub oil 3400 ltrs Gear oil 20895 ltrs Lube oil gear 20865 ltrs Grease 2890 kgs Lube/aero 199 ltrs Cutting fluids 730 ltrs In 205 ltr drums / 25 ltr cans / 5 ltr cans

Description YL-15 is naphthalene-based non-corrosive, non-chlorine compound antifreeze admixture which compounded with water-reducing, early-strength, reducing the freezing point, preventing freezing damage etc. ingredients, powder, it has early-strength, water-reducing, air-entraining, anticorrosion etc. functions. It is mixed to the concrete according to the request, can obviously improve the configuration of the capillary pores and reduce free-water and the freezing point of the concrete effectively. And it can accelerate cement hydration and concrete hardening under the low temperature condition, enhance the early strength greatly and make the strong more and more by time, is ideal admixture for construction in winter. Uses YL-15 is suitable for the winter construction (in ambient temperatures ranging from -5 degree to -20 degree) of common concrete, pumping concrete, large volume concrete and ready mixed concrete. Advantage YL-15 is a new generation of high efficient anti-freezing admixture. Small dosage, completely water soluble, low alkali, apparent reducing effect on the alkali-aggregate reaction. It can improve the workability, pumping properties and early strength of the concrete. YL-15 is suitable for concrete and precast below C50 but also the concrete above C50 with a addition of our high range water reducing admixture. Specifications Item Norm Item Norm Appearance Lark powder Fluidity of cement 120-160mm Moisture ¹10% Chlorine content Non PH value 7-9 Alkali content % 2.2 Technical Data Sheet Item JK-15 C10 JK-15 C15 JK-15 C20 Dosage 2.0% 3.0% 4.0% Lowest Daily Temperature -5degree -10 degree -15 degree Setting Time Difference (min) Initial -+120 Final Compressive Strength (Mpa) 1 day 8 2 1 3 days 25 20 10 7 days 40 30 15 28 days 60 50 40 Shrinkage (%) 28 days 20 Steel-bar Corrosion None Cautious 1.After the pouring construction covers the surface using the plastic sheeting and the grass curtain, do not let it to freeze immediately or blow the winds excessively caused the crack. Entering the mold temperature control above 5 degree. 2.Required heating curing at the early strength fast-enhancement. After the concrete formed, if the surface iced up, this phenomenon does not cause any the freezing damage. The intensity will remain enhancing rapidly, when the ambient temperature increasing. Package, Storage & Shelf Life For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg. It should be stored in a dedicated warehouse that is well-ventilated and dry and keep away from moisture. Shelf Life: Minimum 12 months. After the expiration date, it can be used if testing results is qualified. For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg.