Usage Mainly used for maintaining temperature of molten aluminum alloys, suitable for all the crafting processes, such as pre-aluminum casting degassing, alloy preparation, uniform structure and temperature regulation and so on. â?¢ Energy source can be electricity and gas. Equipment Features â?¢Higher-quality molten aluminum can be obtained. Molten aluminum temperature accuracy, composition uniformity and less hydrogen content can be guaranteed. Flexible production organization. The crucible can be replaced at any time for production of different types of alloys, without contaminating the molten aluminum. Low burning loss of aluminum. The aluminum in the crucible is heated with heat conduction of the crucible, without local high temperature, reducing oxidizing loss and high-temperature volatilization, lowering the burning loss of aluminum to a level below 1.2%. The furnace floor is molded by monolithic casting with a casting material. Moreover, at the bottom of the furnace is a leakage outlet, through which the molten aluminum can outflow once the crucible is broken, reducing the risk of damage to the furnace body. The temperature of the furnace chamber and molten aluminum is controlled by series circuit, ensuring sufficient heating efficiency and preventing overheating of the furnace chamber. The molten aluminum thermocouple protect tube is made from silicon nitride, which is well heat-conducting, resistant to corrosion by the molten aluminum, resistant to thermal and cold shocks and highly strong. The tube can be directly immersed in the molten aluminum to measure its temperature. It has a service life of more than 2 years. Multiple safety protection modes are adopted, such as molten aluminum over-temperature alarm, furnace chamber over-temperature alarm and crucible leakage alarm and so on.
Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps.
Heating energy sources: natural gas, liquefied petroleum gas (LPG). An imported famous-brand automatic burner or gas burner is adopted, ensuring high heating performance, low noise and zero-discharge of fume, meeting the environmental protection requirements. After heating, the hot furnace gas is blown back to the upper mouth of the crucible through the flue; or preheated the combustion air from the flue heater ex-changer to improve the heating efficiency and reduce fuel consumption. Multiple safety protection modes are adopted, such as gas under-pressure, assisted gas under-pressure, flameout alarm and so on. Melting rate in a cold furnace: 3.5h Melting rate in a heated furnace: 2h
Product Name Fashion Consumable Personal Protection Particulate N95 Mask Material Non woven fabric+ Melt Blown Filter+ Non Woven Fabric Shape Molded Cup/Cone Application Farm buildings, Mining, Weaving,Polishing,Pharmacy,Hardware,Cement Size 190*130mm Carton size 310*200*145mm Packing details 50pcs/Carton Product's details Adjustable aluminum nose clip to offer better fit
All type clothes, urea, all type agriculture and food items, all personal and entertainment items, all industrial and automotive items, all construction household and furnishing, all computers electronics and electrical, handicraft, items, npk, fertilizers t shirt, blanket,dry fruits, animal feeds, towel, bedsheets, toys, all grocery, copper wire scrap, copper ore concentrate, zinc ore concentrate, lead concentrate, fly ash, a4 paper, a3 paper, craft paper, occ, ldpe, hdpe , pvc resin, petroleum products, jp54, jet a1, crude oil, blco , biodiesel, diesel, fuel, coal, d2, petcock, pulses, mustard oil, spices , sanitizer, gloves, medical products, cement, core sand, old ships lng, lpg, all groceries items, food products, hms1 and hms2, fish, chicken feet, chicken paws, agri & food processing agriculture products, fertilizers, seeds, farm products grains, fruits, vegetables, river sands, aggregates, pvc electrical wire, rice, charcoal, wheat flour.Export, import, merchant export import
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
Metals ferrous and non ferrous, such as : aluminium ingots a7, copper cathodes 99.9% , copper milberry scrap 99.7%, hms 1&2, iron ore 62 64%, nickel wire etc., rapeseed oil, sunflower oil, corn oil, peanut oil, coal.
These are ideal for downstream users who wish to re-melt this residual form of aluminium in their own furnaces, and then cast it to produce a variety of end products. We supply primary and secondary Ingots and Billets from Middle East, Asia and Far East.
Carbon Blocks used in furnace having a great alternative against Petcoke. As it has high melting power and cheap as compared to Petcoke. Here in India, we are a supplier and exporters of Carbon blocks. Parameters- Total moisture (Mt): 1.80% Ash(Aad): 13.07 Volatile matter (Vad): 13.94 Fixed Carbon (FCad): 77.88 Sulfur (S): 3.10
Cmmdity: Aluminum Fluride (Aluminium fluride) ther name: Aluminum trifluride Frmula:AlF3 M.W.:83.98 Prperties: The prduct is a white needle crystal r pwder. SP. GR. 2.8823.13g/ cm3, sublimatin temp. 1272Celsiur scale.Its slightly sluble in water and greatly sluble in HF liquid. The chemical prperty fr the high density aluminum fluride is very steady, but that cntains certain crystal water will be decmpsed int Al23 at high temperature with HF being released. Specificatin: grade chemical cmpsitin % Physical character F Al N2 Fe2342- P25 LI Bulk dity g/cm3 AF-0 61.0 31.5 0.30 0.10 0.06 0.10 0.03 0.5 1.5 AF-1 60.0 31.0 0.40 0.30 0.10 0.6 0.04 1.0 1.3 AF-2 58.0 29.0 2.8 0.30 0.12 1.0 0.04 5.5 0.7 AF-3 58.0 29.0 2.8 0.35 0.12 1.0 0.04 5.5 0.7 Uses: Its mainly used as an adjusting agent fr electrlyte in aluminum smelting by fused salt electrlysis, als in ceramic glaze, catalyst and flux f nnferrus metal metallurgy etc. Brief Intrductin f the Prductin Technics In the Hydrgen Fluride Reacting Furnace which is heated utside, Vitril reacts with Flurite t create the Hydrgen Fluride Gas and Anhydrus Fluride Plaster by heating in the prcess f prducing Aluminum Fluride, then the Hydrgen Fluride Gas react with dry Aluminium Hydrxide in Fluidized Bed t create t Aluminum Fluride and water. Packaging packed in wven PP bags with plastic film inside. Each bag has net weight f 25kgs, 50kgs, 500kgs and 1000kgs.
Commodity: Synthetic Cryolite Formula: Na3AlF6 M.W.: 209.95 Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively. Specifications: Appearance white powder F 52% min Al 12% min Na 33% max SiO2 0.36% max Fe2O3 0.08% max CaO 0.5% max P2O5 0.03% max SO4 0.6% max H2O 0.4% max Loss on ignition 2 % max Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels. Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.
Commodity:Avobenzone CAS No. 70356-09-1 Molecular Formula C20H22O3 Molecular Weigh 310.39 EINEC No. 274-581-6 Specification Quality standard: USP36 Appearance Off-white powder Assay 95.0-105.0% Melting range 81.0~86.0 Impurities Any individual impurity: 3.0% The sum of all of the impurities: 4.5% Loss on drying 0.5% Packaging and storage: 1kg/aluminum foil bag. 25kg/barrel, pharmaceutical packaging barrel. Sealed, stored in dark, with a shelf life of 2 years. Reference dosage: The hygiene standards for cosmetics stipulate that the maximum amount added shall not exceed 5%, and the general dosage is 1-4%. Usage: Sunscreen agent-1789 is the most effective fat soluble UVA filter and is a safe and effective UVA sunscreen approved by the US FDA for sale on the counter. It can effectively block UVA, thereby increasing the SPF value of sunscreen products. It can improve the efficacy of sunscreen products when used in combination with UVB filters, and BL-200 has the best effect when used in combination with octyl methoxycinnamate. BL-200 can increase its stability in the product. It has an extremely effective protective and repairing effect on human skin. Application: This product is soluble in oil and can be formulated into a cream using the usual method. However, the product turns red when it encounters metal ions, so other components such as formula water should not introduce metal ions. The equipment should be made of pure stainless steel, and an appropriate amount of EDTA-2Na should be added to the formula water phase to chelate with metal ions.
The holding furnace is used for the refine, drossing, standing and temperature rising of Aluminum and molten Aluminum during or before casting. The furnace applies direct combustion burner, which is featured with high temperature rising ratio and the temperature of molten Aluminum could be precisively manipulated. The end product of this furnace (molten Aluminum) is fully qualified for the condition before casting.
The holding furnace is used for the refine, drossing, standing and temperature rising of Aluminum and molten Aluminum during or before casting. The furnace applies direct combustion burner, which is featured with high temperature rising ratio and the temperature of molten Aluminum could be precisively manipulated. The end product of this furnace (molten Aluminum) is fully qualified for the condition before casting.
Aluminum scrap Density: 2.702g/cm Melting point: 660.37 Boiling point: 2467.0 Color: silver white
Specifications Brands: Al99.85, Al99.80, Al99.70 1, Aluminum ingot manufacture. 2, high standard. 3, High quality. 4, Competitive price The main models are as follows: AL99.90, AL99.85, AL99.70A, AL99.70, AL99.60, AL99.50, AL99.00, Applications: 1. mainly used for melting ingot 2. discontinuous melting with scrap 3. easy control and operation 4. fast melting 5. Used for industry such as automobile,pinning and weaving,electron broadly and so on The main models are as follows: AL99.90, AL99.85, AL99.70A, AL99.70, AL99.60, AL99.50, AL99.00, and below
Specifications Brands: Al99.85, Al99.80, Al99.70 1, Aluminum ingot manufacture. 2, high standard. 3, High quality. 4, Competitive price The main models are as follows: AL99.90, AL99.85, AL99.70A, AL99.70, AL99.60, AL99.50, AL99.00, Applications: 1. mainly used for melting ingot 2. discontinuous melting with scrap 3. easy control and operation 4. fast melting 5. Used for industry such as automobile,pinning and weaving,electron broadly and so on The main models are as follows: AL99.90, AL99.85, AL99.70A, AL99.70, AL99.60, AL99.50, AL99.00, and below
Technical parameters: Model (ton/furnace)Furnace hearth size (m)Energy consumption (kg/h) 30.14*1.6*2.0150 50.45*2.0*2.4200 80.49 *2.4*3.0200 100.49*2.8*4.5250 120.55*2.8*4.5250 150.55*3.0*5.0300 Technical parameters: Model (ton/furnace)Furnace hearth size (m)Energy consumption (kg/h) 30.14*1.6*2.0150 50.45*2.0*2.4200 80.49 *2.4*3.0200 100.49*2.8*4.5250 120.55*2.8*4.5250 150.55*3.0*5.0300
