Alnico magnets are manufactured by a cast or sintered process. Production level cast Alnico magnets are produced by conventional foundry methods using resin bonded sand molds. The magnetic characteristics for some exotic grades of Alnico magnets are achieved during the casting operation and are due to the unique crystalline grain orientation developed during the process. Sintered Alnico is a powdered metal and it is manufactured by compacting finely milled Alnico powder in a metallic mold. The resulting geometry is not fully dense and it must be sintered in a furnace to achieve a solid state. Properties of all anisotropic or oriented cast and sintered Alnico magnet alloys are optimized during a heat treatment process. The direction of orientation is determined in this phase of the manufacturing process which involves heating the alloy above its curie temperature, then cooling at a controlled rate in the presence of a directional magnetic field. Some cast and sintered Alnico magnets are isotropic or un-oriented and they skip the orientation process. These grades of Alnico magnets usually have lower energy products compared to the anisotropic grades, but they lend themselves to specialized magnetizing. The surfaces of cast Alnico magnets are usually dark grey, have wide tolerances, and have a rough finish. Critical dimensions are abrasively cut or ground in order to maintain close tolerances and improve the fit and finish. Sintered Alnico magnets usually require minimal grinding because they can be produced with tighter dimensional tolerances. It is usually desirable to have features developed in the casting or sintering operations because conventional machining methods are difficult to employ when fabricating Alnico magnets. According to our customer.
Sintered ND Feb, Bonded ND Feb, Ferrite Magnet (for Motor), Rubber Magnet, SmCo Magent, Alnico Magnet.
We have strong sintered AlNiCo permanent magnet production scale, can produce the performance of Alnico2-8 grades. And annual output nearly 800 tons. AlNiCo magnet is suitable for producing complex, light, thin, and small products, and is widely used in instrumentation, communications, magnetoelectric switches, and various sensors. AlNiCo products are mainly used in automotive parts, instrumentation, electroacoustics, motors, nuclear power, teaching, aerospace and other fields. It has the characteristics of low temperature coefficient, high temperature resistance, humidity resistance, not easy to oxidize and good working stability.
Alnico Characteristics 1. High energies and relatively low coercive force 2. High magnetic flux density and resistance to demagnetization from vibration and shock 3. Both isotropic and anisotropic are available. 4. Excellent resistance to high temperature alnico has the lowest temperature coefficient of any commercial magnet material, providing for excellent stability over a wide temperature range. A properly designed circuit using alnico magnets will have a stable flux output during temperature fluctuations. The maximum working temperature for alinico is 510c (950f). Common applications Magnetos, separators, mri, sensors, holding magnets, security system, relays, volt-amp meters, industrial motors
Ainico magnet is an alloy of aluminum-nickel-cobalt, has excellent temperature stability and corrosion resistance, it can be used in motor, sensor, separator, loudspeaker and holding system
Alnico magnet is mainly having Al, Ni, Co, Fe and others metal, is mainly used in Motors, Meters, Odometer, Speakers, Sensors, Guitar, Education, etc.
Product name : Alnico magnet, LNG37 Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Cast Alnico Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Grade : LNG37 LNG40 LNG4 LNGT40 Tolerance in size : +/-0.05 mm
Product name : Alnico magnet Custom Super Strong permanent LNGT60 Magnets Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Cast Alnico Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Grade : LNG37 LNG44 LNGT28, LNGT40, LNGT72 Tolerance in size : +/-0.05 mm
1. Alnico magnets are composed of aluminum, nickel, cobalt and iron. 2. They are manufactured using a process of either casting or sintering to create various shapes, and they are also very resistant to high temperatures.
Ainico permanent magnet is an alloy magnet made from ai, ni, co fe and other trace metal elements and may be produced through either sintering or casting process. The product has remarkable resistance against corrosion and high temperature, and is mainly used in certain precision instruments.
Alnico magnet: iso/ ts16949/ iso9001/ iso14001 We have cast alnico magnet, sintered alnico magnet; Our alnico property: alnico 2, alnico 3, alnico 4, alnico 5, alnico 5dg, alnico 5c, alnico 6, alnico 7, alnico 8, alnico 9, alnico 5-7, alnico 8hc Our alnico field: electric motors, electric guitar pickups, sensors, loudspeakers, cow magnets, automotive and electronic sensors, actuators, hall effect sensors, magnetron, reed switches, twt amplifiers, communication; Our alnico market: europe, america, japan, korea, china, russia Alnico characteristics: 1) high residual induction 2) excellent temperature stability 3) wide range of working temperatures, up to 550c 4) good corrosion resistance 5) wide range of complex shapes and sizes available 6) can be plated or painted 7) easy of magnetization 8) high field strengths at medium prices 9) lower initial tooling cost Carton
Fle1: NdFeB, $12USD/kg, 2:SmCo, $65usd/kg 3: Alnico: $12USD/kg,4:hard ferrite magnets, $1.00 USD/kg,5:flexible magnet: 1.00USD/kg 6: Y25, speaker magnet,D
Magnet Standard carton
Kinds of figures and kinds of magnetic property.
Alnico magnets
Alnico magnets Grade ln9-lngt82, lngt36j Mmpa equivalent alnico2-alnico9, alnico8hc Carton 36x27x14mm, 32x23x25mm, 34x20x30mm, etc.
0.1mg magentic analytical scale Analytical Balance analytical density scale Humanized design, novel design, five-side full- transparent windbreak. Automatic error correction, four point linear calibration, overload protection Much bigger backlight LCD display takes clearer and more comfortable visual sense Model : FA-B/C Model FA1004C FA1604C FA2204C FA1004B FA2004B FA2204B FA2104S Capacity 0-100g 0-160g 0-220g 0-100g 0-200g 0-220g 0-60g/60-210g Readability 0.0001g 0.0001g/0.001g Repeatability
HPMG start with alnico magnets, covers all applications.More than 10, 000 mouldings.1500 tons /year, share 40% of the world market. Covers all grades from alnico2~alnico9 Skin package waterproof
HPMG start with alnico magnets,with 35 years manufacturing experience covers all applications, more than 10,000 moudlings. capacity 1500 tons/ year, share 40% of world market.
Product Name : Magnetic/Non-Magentic Dry Erase Board With Colored Frame With Whiteboard Marker18.5x26cm Item No : AF-2117 Price of product ( USD price or FOB price) : 0.112 Product Origin : China Minimum Order Size and Packgaing details : MOQ: 5CTNS 24pc/opp bag 240pcs/ctn
