Frequency range:810-960, 1710-2170mhz, Average gain:4dbi,At 810-960mhz, , 5dbi,At 1710-1990mhz, , 5dbi,At 2110-2170mhz, Vswr:
Center Frequency 915MHz Band Width CF ±8MHz Polarization Linear Gain 3dBi V.S.W.R 2.0 Impendance 50 Connector SMA Male
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20 heavy duty container. Please feel free to contact us for further details
A Simple yet Effective designed product used by most of the Paper Mills in India. Uses: Reel Corner Protector
Uses: In AGV. In Supermarkets. In Refrigerators Available both with adhesive and without adhesive
Uses: Advertisement. Sales promotion Automobile signage Crafts Calendars and games Feature: High durability Tensile strength Resistibility to adverse conditions
We have an edge in presenting Convergence Purity Magnet. It is basically a magnetic beam-adjusting device for use in the region of the neck of an in-line type color picture tube and is composed of three pairs of plastic magnet rings. Virtually each pair comprises 2-pole, 4-pole and 6-pole plastic magnet rings. The tool comprises a magnetic field distribution suited to a silky adjustment of the electron beam, as a result permitting centralization and rotation of electron beam in the order of the color picture tube. Neck Dia: 29 mm Size Available: For 14", 20", 21", 29" tubes
We present Plastic Bonded Permanent Magnets that are quite effective as correction magnet in color picture tube and deflection yoke. Size Available: Customized
We present Magnetic Paint, which forms a competent means of sticking the products. Applications: Message board Craft display Planning board Menu boards Instruction board Place to Use: Kids rooms and class rooms Restaurants and garage Hospital and factories Available in: 50 ml - 2.5 ltrs
We manufacture Magnetic Calendars that are offered as per the requirements of the clients. These are available in various designs, styles and forms. Size Available: Customized Die Cut Variety of Configuration: Customized
We produce and provide Magnetic Dots that are used to hold paper or white board. We have offered these products in customized forms and sizes such as 40 mm dia and 50 mm diameter. Besides they have also been offered in variety of configurations such as Vinyl Foam and Foam Magnet. Applications: Used to hold paper Size Available: Customized Die Cut Variety of Configuration: Reflective Vinyl Foam
We have offered our fine range of Magnetic Alphabets & Numericals in a variety of forms such as Reflective Vinyl and Foam Fun. Applications: Instruction Boards Kids Rooms Size Available: Customized Variety of Configuration: Reflective Vinyl Foam
We produce and furnish Printable Magnetic Paper that uncover the following applications: Applications: Inter office memo Decorative magnets Portraits Posters Arts & crafts Size Available: 105 mm X 148 mm 148 mm X 210 mm 210 mm X 297 mm 297 mm X 420 mm Thickness: 0.2 mm - 1.5 mm Variety of Configuration: Plain Printable Vinyl Front (glossy & matt finish)
We present Flexible Magnets in Rolls, Sheets and Tapes form, and these products could be availed on customized basis. Applications: Sales promotion Advertising specialties Automobile signage Crafts Bin markers Menu boards Calendars Graphics Games and alphabets Size Available: Width: 4 mm - 400 mm Thickness: 0.25 mm - 5 mm Variety of Configuration: Plain and un-coated Adhesive back Printable / Reflective Vinyl Front
Fridge magnet, magnet strips and all types of magnets, edge protector, angle board, pet strap, p.p strap, stretch film, core tube..
High quality Thai ICUMSA-45 Sugar has a sparkling white color and is suitable for a wide range of food applications. It is the safest form of Sugar thanks to its refining process, which removes all of the bacteria and contaminants often present in raw sugars. Terms: CIF USD 420+ / mt depending on the qty ITLC / SBLC / TT from a major international bank Shipments: MOQ 12,500 mt Average 4 weeks to first shipment, monthly after that depending on the order volume. Inspection: SGS/TUV/Intertek Inspection and loading supervision is available at buyer's expense Specifications: Standard Shipping Export Quality Fit For Human Consumption Product: Icumsa 45 Refined Sugar Granulation: Crystal Sparkling White MOISTURE: 0.04% MAX POLARIZATION: 99.8 MIN SOLUBILITY: 100% TASTE: NATURAL SMELL: NATURAL COLOR: 45 ICUMSA UNITS MAX INVERT SUGAR: 0.04% MAX SUGAR REDUCTION: 0.05% MAX CONDUCTIVITY ASH: 0.04% MAX CONTAMINANTS (mg): 0.5 MAX SALMONELLA: ABSENT YEAST AND MOLD: 20cfu/10g MAX SULPHUR DIOXIDE: 20mg/Kg MIN RADIATION INSIDE CS-137 of 50 BQ per KG MAGNETIC PARTICLES: mg/Kg 4 MAX PNH STAPHYLOCOCCUS: NIL AS 1 P.P.M. MAX PB 1 P.P.M. MAX CU 3 P.P.M. MAX
Wooden handicrafts such as wooden bowls, wooden animals , bushman statures, wooden spoons, leather belts . types wood normally used as follows, light and hard wood such as teak, mahogany, black ebony, saligina wood, rose wood and also olive wood , pine wood and white light wood, beads work jewelry, necklaces , bangles , earrings, fridge magnets, wooden crafted wall hangers , beads sandals , cushion covers, fabric bags ,african fabrics cushion covers, hand embroidery products, patch work, table clothes and table napkins or serviettes. grass brooms , straw fruit baskets , straw hats , fruits baskets ,natural land scaping stones such as building rocks , slats and sand stone. vintage wood or drift wood of teak and mahogany wood arts such as mirrors , picture frames , glass coffee tables , wood clocks ,stools etc all from driftwood..Shipping
Frequency range (mhz) 850/900/1800/1900/2170 Input impendence (o) 50 V.S.W.R =1.8 Gain (dbi) 9db Polarization type vertical Radiation direction omnidirectional Max input power (w) 50 Mechanical specifications Antenna length (mm) 357±10 Base diameter(mm) 50 Cable (mm) 3000 or customized Connect type sma or customized Mounting ?? magnetic base Radome color ?? black Cableers rg58 or customized Suction(kg) 3.0
Product Name Android MiniPOS Aisino A80 OS Android 7.1 Secure operating system Processor 32-bit, Quad-core, 1.1Ghz application processor High performance secure processor Memory RAM: 1GB (optional 2GB) ROM: 8GB (optional 16GB) Display 5 Color screen 1280 720 Touch Screen Capacitive touchscreen Keys 1 Power key 1 Function key 3 Touch keys WIFI 2.4GHz IEEE802.11b/g/n Communications 4G 3G 2G Bluetooth BT 4.X Card Readers IC card reader NFC reader Camera 2 MP Rear Camera 1D/2D barcode scan Optional: 5MP rear zoom camera GNSS GPS GLONASS BeiDou Indicator Lights 4 NFC LEDs 1 Charging indicator Audio Speaker Microphone Card Slots 1 SIM 2 PSAM Battery 3.85V/3000mAh Dimensions 150 75 16mm L W H Weight 220g Peripheral Port 1 USB OTG, Type-C, 5V Environmental Operating temperature: 0 ~ 50 Storage temperature-20 ~ 70 Relative humidity 5%~95%, Non-condensing Optional Configurations ASD18 Bluetooth Printer Docking Station
