Acetamiprid 97% Tech Suppliers and Manufacturers

Chemical formula : Na5P3O10 Molecular weight : 367.86 Standard executed : GB9983-2004 Appearance : white powder

Gliss Shampoo Bio-tech Restore 500ml

Product Features The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 21% of the products, their biological effects better. This unique high-tech companies use technology to make our products crystallization, high purity. Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction. coarse particles MDCP in the animals stay in the stomach longer and more conducive to the absorption of calcium phosphate, the product produced by micro-particles MDCP form, without any chemical binder. Specifications Appearance white powder or granule Phosphate  21% min Calcium     15% min Fluorine    0.18% max Arsenic    30ppm max Pb   30ppm max Source of OriginRock Packing and Storage Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.

Monocalcium Phosphate (MCP) Feed grade Product Features The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 22% of the products, their biological effects better. This unique high-tech companies use technology to make our products crystallization, high purity and its harmful impurities significantly below standards:HG28611997 Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction. Specifications Appearance white powder or granule Total P 22%min Ca 13-18% F 0.18% max As 10 ppm max Pb 10ppm max Moisture 4%max Source of OriginRock Packing and Storage Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place

Commodity: Dicalcium phosphate Feed Grade Use DCP is the feed preparation of raw materials, Animal right to supplement calcium needs. Coarse its products more applicable to the preparation hens, ducks feed, concentrate feed and premix. Product Nature Molecular Formula:CaHPO4·2H2O,Molecular weight:172.09,After drying with loose white powdery crystals or granules. Neutral products, the melting acid, water-soluble, hygroscopicity small, heated to 90 around gradually lose water of crystallization. Product Features The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 18% of the products, due to a small amount of MCP, and its biological effects better. This unique high-tech companies use technology to make our products crystallization, high purity and its harmful impurities significantly below standards:HG26362000 Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction. Coarse particle DCP in the animals stay in the stomach longer and more conducive to the absorption of calcium phosphate, the product of Micro-particle DCP granulation from mechanical, without any chemical binder. Specifications Appearance white and gray powder/granule Total P 18% min Calcium 21% min  F 0.18% max As 30 ppm max Pb 30 ppm max Packing and Storage Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.

[Technical Indicators] 1. Industrial grade Indicator Name/Indicator Value Powdered Products (F) Needle Products (Z) Level 92 Level 93 Level 95 Level 92 Level 95 Appearance White or light yellow powder, without caking White or yellowish needle-like, without lumps Active matter,% 92.0 93.0 95.0 92.0 95.0 Free oil,% 1.2 1.2 1.2 2.0 1.5 Inorganic salt,% Sodium sulfate 5.8 4.8 2.5 4.8 2.5 Sodium chloride 0.15 0.15 0.15 0.15 0.15 Moisture,% 2.0 2.0 2.0 4.0 3.0 PH value (1% aqueous solution) 7.5-9.5 7.5-10 Whiteness (WB), 90 2. Toothpaste grade Indicator Name/Indicator Value Toothpaste Grade (Y) (I) Level (II) Level (III) Level Appearance White or yellowish powdery or needle-like, without caking Active matter,% 95.0 93.0 93.0 Free oil,% 1.2 1.2 1.2 Inorganic salt,% Sodium sulfate 2.5 3.2 4.0 Sodium chloride 0.15 0.15 0.15 Moisture,% 2.0 2.0 3.0 PH value (1% aqueous solution) 8-9.3 8-9.3 8-10 Whiteness (WB), 90 Foaming capacity/mm 180 Heavy metal (as Pb)/ (mg/Kg), 15 Arsenic content (as As)/ (mg/Kg), 3 Total bacterial count/ (CFU/G), 100 Total number of molds and yeasts/ (CFU/G), 100 Fecal coliforms/G Not to be detected Pseudomonas aeruginosa/G Not to be detected Staphylococcus aureus/G Not to be detected   3. Latex grade Indicator Name/Indicator Value Latex grade (powder, needle, liquid) Aggregate grade Seed level Liquid K12 Appearance White or yellowish powdery or needle-like, without caking Light yellow transparent liquid Active matter,% 94.0 92 28.5-30.5 Free oil,% 0.8-1.0 1.5-2.0 1.5 Inorganic salt,% Sodium sulfate 3.0 3.0 1.5 Sodium chloride 0.15 0.15 0.05 Moisture,% 3.5 3.5 - PH value (1% aqueous solution) 8-10 7.5-9.5 Whiteness (WB), 90 - Color Klett (30% active), - 60 4. Reagent grade Indicator Name/Indicator Value Reagent grade Level 99% Level 97% Appearance White flaky crystals White powder Solubility (1%, alcohol) Completely dissolved Solubility (10%, aqueous solution) Completely dissolved Chroma APHA (20%, deionized water), 15   - Active matter (%), â?¥ 99 (on dry basis) 97 Petroleum ether soluble matter (%), 0.2 1.0 Sodium sulfate (%), 0.5 1.5 Sodium chloride (%), Moisture (%), 1.0 2.0 PH value (1% aqueous solution) 6.0-8.0 6.0-11 Phosphate, 1ppm - Lead (Pb), 2ppm Iron (Fe), 1ppm Nitrogen, 5ppm - Arsenic (As), 0.1ppm Fraction content (%), 99.0 Absorbance (3%, deionized water) 230nm 0.4 260nm 0.1 280nm 0.1 - 410nm 0.01

Commodity: Sodium Metabisulphite Molecular formula:Na2S2O5 Molecule Weight:190.10 H.S code:28321000 CAS:7681-57-4 Product Features Appearance : White Or Light Yellow Crystal Powder Odour: Sulfur Dioxide Taste : Salty Melting Poing : 150 Specific Density1.48 Ph : 4.0-4.6 Solubility : Soluble In Water ,insoluble In Alcohol Application: 1. For industry Mordant of printing and dyeing; Dechlorinate of textile after bleaching; Sulphonated agent and reducer of chemical industry and pharmacy; Bleach of paper pulp, bamboo and timber bleach of stapk; Treatment agent of waste water; Rubber solidifying agent ;Perfume industry is served as hydrocarbon perfume aldehyde ; The hide profession employ to do to molt dose and pliable dose and wearproof dose ,The sensitize industry is served as the developing agent reductant and the protection of fixing bath dose and so on; sewage treatment. 2.For food additive Bleach agent (e.g.candies, cake, bamboo shoots, etc);Loose agent (e.g.bread, cracker etc);Antiseptic and germicide (e.g.fruit juice, tinned foodbrews, the cereals food is defended storage etc);Inhibitor and freshen agent (e.g.day lily, seafood, fruit and vegetable etc) Specifications: Na2S2O5 97% min SO2 65% min Fe 0.0015% max water-Insoluble 0.01% max As 0.0001% max PH 4.0-4.6 Packing and Storage Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg/1200kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.

English Name : Ethylene diamine tetraacetic acid (EDTA) Molecular Fomula : C10H16N2O8 Molecular Weight : M=292.24 CASNo. : 60-00-4 Properties : white crystal powder melting point 240(decomposition) insoluble in cold water ,alcohol and general organic solvent, slightly soluble in hot water, but soluble in sodium hydroxide, sodium carbonate and ammonia solution. An agent for complexation, EDTA is mainly used for water treatment, as an additive to detergent, a chemical for photography, paper-making and oil-field. It is also used as detergent for boiler cleaning and reagent in chemical analysis. 1. High molecular chemical industry: EDTA is used as polymetization activator for butyl bezene latex, and polyreaction terminator in acrylic fibre production. 2.Daily chemicals: EDTA is used as additive to detergent, skin cream and hair-conditioner. 3.Paper-making: EDTA is used for treating the steamed fibre. It will promote the whiteness of paper and reduce the incrustation in the steamer. 4.Pharmaceutical industry: Through cyclopolymerization with methyl amide, EDTA is made into ethyl amide, a remedy for psoriasis. It is also a stablizer for some vaccines and an antihaemoagglutinin. 5. Textile dyeing and printing: EDTA will promote colour ability of the dyestuff and brightness of the dyed fabric. Package of Disodium edta zinc chelated Packing: 25KG/bag , Pearly membrane compound bag, with PE inside or according to the customers demand. Storage: Stored in the dry and ventilated inside storeroom, prevent direct sunlight, slightly pile and put down.

CAS NO 0169-02-5  

L-Malic Acid, E296, CAS no.97-67-6, Chemical Formula C4H6O5, food acidulent, manufacturing process through double hydration of maleic anhydride, white crystals or crystalline powder. L-Malic Acid is widely used as acidity regulator. Uses in Carbonated/ Non-carbonated Beverages, Powdered Mixes, Low-Calorie Beverages, Wines, Calcium Supplements, Confectionaries, Hard Candy, Chewing Gum, Acid-Based skin cosmetics,Bakery Products As an experienced L-Malic Acid manufacturer and supplier, we has been supplying and exporting L-Malic Acid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. L-Malic Acid Food Grade Specification DESCRIPTION White crystals or crystalline powder, fairly hygroscopic, dissolving easily in water and alcohol. Chemical Name L-hydroxy butanedioic acid Molecular Formula C4H6O5 Structural Formula Molecular Weight 134.09 SPECIFICATION (GB 13737-2008) Assay(as C4H6O5) 99.0% Min Specific Rotation -1.6~ -2.6 Sulfate 0.02% Max Chloride[Cl] 0.004% Max Arsenic [as As] 2mg/kg Max Heavy Metals(as Pb) 10mg/kg Max Lead 2mg/kg Max Residue on ignition 0.10% Max Clarity test Qualified Fumaric Acid 0.5% Max Maleic Acid 0.05% Max

L-Citrulline DL-Malate, CAS No.54940-97-5, manufactured through chemical synthesis from L-Citrulline and Dl-Malate(1:1) or (2:1) , available as white powder used as nutritional supplements. It used as nutritional supplements in food and beverage industries. As an experienced L-Citrulline DL-Malate manufacturer and supplier, we has been supplying and exporting L-Citrulline DL-Malate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. L-Citrulline DL-Malate Specification CAS Number 372-75-8 Molecular Formula C6H13N3O3 Molecular Weight 175.19 Assay 98.5-101.0% Appearance White crystals or crystalline powder Odor Characteristic Loss on drying 0.2% Max. Dosage 6 grams a day Specification 98%min Main benefits Increase nitric oxide, Reduces Lactic Acid and Ammonia, increase energy Applied industry Sports nutrition,fitness, bodybuilding