Hot sale Toluene Dissocyanate/TDI Toluene diisocyanate (TDI) is an aromatic diisocyanate that is a clear, pale yellow liquid with a sharp, pungent odor, which is insoluble in water and miscible with most common organic solvents. TDI (CAS No. 26471-62-5) consists of two isomers: toluene-2,4-diisocyanate (2,4-TDI) (CAS No. 584- 84-9) and toluene-2,6-diisocyanate (2,6-TDI) (CAS No. 91- 08-7), which is commercially produced in different ratios. The most common ratio is 80% 2,4-TDI/20% 2,6 TDI. TDI is widely used and accounted for 34% of the global isocyanate market in 2000 Tdi 80/20 is used for Flexible Polyurethane Foam and other other polyurethane applications including elastomers,synthetic leather,coated fabrics,paints and adhesives. It is spray-applied,closed-cell polyurethane foam system with high fire resistance properties.it applies to all kinds of spray-applied thermal insulation engineering,such as building exterior cold rooms,large-scale pipeline,etc.
Hot sale Toluene Dissocyanate/TDI Toluene diisocyanate (TDI) is an aromatic diisocyanate that is a clear, pale yellow liquid with a sharp, pungent odor, which is insoluble in water and miscible with most common organic solvents. TDI (CAS No. 26471-62-5) consists of two isomers: toluene-2,4-diisocyanate (2,4-TDI) (CAS No. 584- 84-9) and toluene-2,6-diisocyanate (2,6-TDI) (CAS No. 91- 08-7), which is commercially produced in different ratios. The most common ratio is 80% 2,4-TDI/20% 2,6 TDI. TDI is widely used and accounted for 34% of the global isocyanate market in 2000 Tdi 80/20 is used for Flexible Polyurethane Foam and other other polyurethane applications including elastomers,synthetic leather,coated fabrics,paints and adhesives. It is spray-applied,closed-cell polyurethane foam system with high fire resistance properties.it applies to all kinds of spray-applied thermal insulation engineering,such as building exterior cold rooms,large-scale pipeline,etc.
China suppliers TDI 80/20 TOLUENE DIISOCYANATE for polyurethane foam Packing: 250kg/drum, 20mt/20'fcl Delivery: within 15 days after payment Aplications: Preparation of Polyurethane and Large Cyclic Crown Ethers, etc.
TDI 80/20 Toluene Diisocyanate for polyurethane foam / PU China suppliers Applications: Preparation of Polyurethane and Large Cyclic Crown Ethers, etc. Packing: 250kg/drum, 20MT/20'FCL Delivery: within 15 days after payment Waiting your early reply.
TDI 80/20 available from Japan and South Korea. COSMONATE T-80 KONNATE T-80 Good rates available to the Americas and Asia TDS and MSDS on request.
Specification : Purity , % : 99.5 min Isomer ratio, % ( 2, 4 -toluene diisocyanate ) : 80 +/- 1 Isomer ratio, % ( 2, 6 toluene diisocyanate ) : 20 +/- 1 Acid content ( as hci ) , ppm : 80 +/-10 Hydrolyzable chlorine, ppm : 100 +/- 20 Total chlorin , ppm : 700 max Color , apha : 15 max Packing in 250 kgs. Drum with pallet total 80 drums in 1x20'fcl.
FAS Hamburg Quantity: 2-4 load per month Origin: Germany Place of Origin: : JAPAN, US, EUROPE Unit : Ton/Tons Minimum Order : 25 Tons Payment Term : T/T 50/50 and L/C 100% at sight Estimate Lead Time : 15 - 20 days Origin: Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Bales
FAS Hamburg Quantity: 3-4 loads/month Place of Origin: : JAPAN, US, EUROPE Unit : Ton/Tons Minimum Order : 25 Tons Payment Term : T/T 50/50 and L/C 100% at sight Estimate Lead Time : 15 - 20 days Origin: Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Bales
Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry. The level of Fe% in the slag has been estimated by water displacement test. This material con offer competitive advantages respect other metal scraps: Price; Stable Chemistry; The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
FAS Hamburg Quantity: 3-4 loads/month Place of Origin: : JAPAN, US, EUROPE Unit : Ton/Tons Minimum Order : 25 Tons Payment Term : T/T 50/50 and L/C 100% at sight Estimate Lead Time : 15 - 20 days Origin: Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Bales
6N toothbrushes in a blister pack 80 such packs in a case 20 such cases on a pallet pallet size 120 x 100 x 135 by air OR 36 such cases on a pallet pallet size 120 x 100 x 231 by sea OR 500 such cases direct on floor without pallet in a 20 dry container OR 1075 such cases direct on floor without pallet in a 40 dry container OR 1300 such cases direct on floor without pallet in a 40 HC dry container
LDPE roll natural 80% color 20% Plastic Scrap MATERIAL : LDPE roll natural 80% color 20% CATEGORY : LDPE TYPE : roll GRADE : natural 80% color 20% SPECIFICATION : LDPE roll natural roll 80%,colored roll 20%.100MT available. ORIGIN : NZ LOADING WEIGHT : 20-22 FOB (USD/Ton) : 600-800
The manufacture of both granulated and powdered garlic is the same, except for the grinding or powdering process. Granulated garlic is coarse while garlic powder is ground extra fine. Whole cloves of garlic are peeled, cleaned and then sent into a machine that slices and chops them into smaller sections. The sections are dried in slow ovens for three to four hours. When the garlic has cooled it is ground to the desired consistency, be it granulated or powdered. The finished products are put through sifters to separate any debris or undesirable pieces. Both are packaged in air-tight containers and stored in a cool, dry place. Granulated and powdered garlic are used to season and enhance the flavor of many foods. Often it is an appropriate substitute when fresh garlic is called for in a recipe. Powdered garlic dissolves almost instantly when incorporated into any dish, hot or cold. Granulated garlic takes a few minutes to become incorporated and release its flavor. We can offer Garlic Granules in 0.5mm to 1.0mm, 40/60 mesh, 26/40 mesh - 20 FCL: 10 Mt (Flakes/Cloves), 14-15 Mt (Minced/Granules/Powder) - 40 FCL H/C: 20 Mt (Flakes/Cloves), 25-30 Mt (Minced/Granules/Powder) Product Packing - 12.5/13/14 Kg Paper Bag inside 1 Poly Bag - 20/25 Kg Cartoon inside 1/2 Poly Bag - 20/25 Kg Cartoon inside 1/2 Aluminium Foil Bag Our range includes: - Dehydrated Garlic Flakes/Cloves (5-10mm) - Dehydrated Garlic Minced (1-3mm, 3-5mm) - Dehydrated Garlic Granules (G1, G2, G3) - Dehydrated Garlic Powder (80-100 mesh) -
Oregano - scientifically named Origanum vulgare by Carolus Linnaeus – is a common species of Origanum, a genus of the mint family (Lamiaceae). It is native to warm-temperate western and south western Eurasia and the Mediterranean region. Oregano is a perennial herb, growing from 20–80 cm tall, with opposite leaves 1- 4 cm long. The flowers are purple, 3–4 mm long, produced in erect spikes. It is sometimes called Wild Marjoram, and its close relative O. majoramum is then known as "Sweet Marjoram". Uses Culinary Dried oregano for culinary use. Oregano growing in a field. Oregano is an important culinary herb. It is particularly widely used in Turkish, Greek, Portuguese, Spanish, Latin American, and Italian cuisine. It is the leaves that are used in cooking, and the dried herb is often more flavourful than the fresh. [2] Oregano [3] is often used in tomato sauces, fried vegetables, and grilled meat. Together with basil, it contributes much to the distinctive character of many Italian dishes. It is commonly used by local chefs in southern Philippines when boiling carabao or cow meat to eliminate the odor of the meat, and to add a nice, spicy flavor. Oregano combines nicely with pickled olives, capers, and lovage leaves. Unlike most Italian herbs, [citation needed] oregano works with hot and spicy food, which is popular in southern Italy. Oregano is an indispensable ingredient in Greek cuisine. Oregano adds flavor to Greek salad and is usually added to the lemon-olive oil sauce that accompanies many fish or meat barbecues and some casseroles. In Turkish Cuisine, oregano is mostly used for flavoring meat, especially for mutton and lamb. In barbecue and kebab restaurants, it can be usually found on table, together with paprika, salt and pepper. Oregano growing in a pot. It has an aromatic, warm and slightly bitter taste. It varies in intensity; good quality oregano is so strong that it almost numbs the tongue, but the cultivars adapted to colder climates have often unsatisfactory flavor. The influence of climate, season and soil on the composition of the essential oil is greater than the difference between the various species. The related species Origanum onites (Greece, Turkey) and O. heracleoticum (Italy, Balkan Peninsula, West Asia) have similar flavors. A closely related plant is marjoram from Turkey, which, however, differs significantly in taste, because phenolic compounds are missing in its essential oil. Some breeds show a flavor intermediate between oregano and marjoram.
We are supplying TDI 80/20 used in foam manufacturing. We are authorised distributors for KPX Korea for supplying TDI in Middle East and Africa. 250 kg new steel drums.
1 101-68-8 4,4'-Diphenylmethane diisocyanate 2 9016-00-6 Poly(dimethylsiloxane) 3 26471-62-5 Tolylene diisocyanate 4 100-42-5 Styrene 5 141-32-2 Butyl acrylate 6 107-13-1 Acrylonitrile 7 106-99-0 Buta-1,3-diene 8 75-38-7 1,1-difluoroethylene 9 9-38-9 Chlorotrifluoroethylene 10 111-44-4 2,2'-Dichlorodiethyl ether 11 1187-93-5 Trifluoromethyl trifluorovinyl ether 12 21645-51-2 Aluminum hydroxide 13 116-14-3 Tetrafluoroethene 14 116-15-4 Hexafluoropropylene 15 126-99-8 Chloroprene 16 103-11-7 2-Ethylhexyl acrylate 17 140-88-5 Ethyl acrylate 18 78-79-5 Isoprene 19 96-33-3 Methyl acrylate 20 1300-21-6 Dichloroethane
S.N CAS No. Item 1 100-21-0 Terephthalic acid 2 67763-03-5 Silsesquioxanes 3 9003-01-4 Acrylic acid 4 1333-86-4 Carbon black 5 80-62-6 Methyl methacrylate 6 61788-97-4 Haloperidol 7 75-38-7 1,1-difluoroethylene 8 100-42-5 Styrene 9 9002-84-0 Poly(tetrafluoroethylene) 10 124-04-9 Adipic acid 11 107-21-1 Ethylene glycol 12 126-30-7 Neopentyl glycol 13 85-44-9 Phthalic anhydride 14 106-89-8 Epichlorohydrin 15 9003-08-1 Amino resin 16 9006-03-5 Chlorinated rubber 17 13463-67-7 Titanium dioxide 18 12227-89-3 Iron Oxide Black 19 922-67-8 Methylpropiolate 20 538-24-9 Trilaurin 21 9011-05-6 Urea formaldehyde 22 79-41-4 Methacrylic acid 23 1314-13-2 Zinc oxide 24 80-05-7 Bisphenol A 25 121-91-5 Isophthalic acid
Commodity: Calcium carbide Molecular formula:CaC2 Molecule Weight: 64.10 H.S code:28491000 CAS: 75-20-7 UN NO.1402 HAZARD CLASS: 4.3 Application: It is a kind of basic material for organic synthesis, and can produce acetylene gas for cutting and welding, also be material for calcium cyanamide. Appearance: Grey, black solid, purple when its purity is more than 90%. Granule:4-25mm / 15-25mm / 25-50mm / 50-80mm /25-80/ 80-120mm Package: Net in 100kg or 50kg new iron drums with nitrogen. Specification: GB10665-2004 Specification Superfine Grade First Grade Second Grade Gas yield(L/kg)L/kg 305 295-305 285-295 PH3 content in acetylene (PH3%) 0.06 0.08 0.08 H2S content in acetylene (H2S%) 0.1 0.1 0.1 Loading weight in 1 x 20fcl:22.5mt
Botanical name Arachis hypogaea Taste Typical Odor Odourless, no foreign odours Color red/pink with skin – typical Production area 5000 Tons Calibers 38/42, 40/50, 50/60, 60/70, 70/80 Packing White polypropylene packaging bag of 25 kg y 50 kg, Big Bag 1250 kg Loading 20 feet: 19 metric tonnes ANALYSIS VALUES Purity 99.50% min Foreign bodies 0.50% max Moisture 9.00% max Broken 10.00% max Other color 1.00% max
