7301 Aqm 7302 Aqm Remote Air Quality Monitor Suppliers and Manufacturers

7301-AQM and 7302-AQM Remote Air Quality and Environmental Monitor (CO2, Temp, RH and TVOC) The AQM Series Remote Particle Counter and Environmental Monitor measures 0.3 µm to 25 µm particles with mass concentration and stores indoor air quality measurements of temperature, relative humidity, CO2, and TVOC in the 7302-AQM. This instrument is the most versatile remote Air Monitor available, with advanced power management and the industryâ??s first sleep mode, allowing for battery operation of periods that can exceed a month on a single charge. The AQM Series can be used as a stand-alone battery operated instrument or it can be easily integrated into a building automation and facility monitoring system via Ethernet, USB or (optional) Wireless 802.11 b/g, RS485 or RS232 connection. 7301-AQM/7302-AQM Remote Air Quality and Environmental Monitor Features & Benefits * Measures mass concentration in μg/m³ and indication of PM (Particle Matter) * Measures up to 6 channels of simultaneous data * Measures CO2, Temperature and Relative Humidity with user alarm set-points * Measures TVOC in parts per billion (Model 7302-AQM) * User adjustable single and two point sensor calibration offset * User-selectable channel sizes * Long-life laser diode technology * Internal 0.1 CFM (2.83 LPM) vacuum pump * Large easy-to-use icon driven color touch screen display * Stores up to 45,000 sample records, 1,000 sample locations and 50 recipes * Easy configuration and transferable from instrument to instrument * Connect using Ethernet, USB or (optional) Wireless 802.11 b/g, RS485 or RS232 * Static or dynamic IP address (DHCP) * Displays and externally prints environmental reports * Internal audible alarm with user selectable thresholds for all environmental parameters * User-definable reports * Allows for ASHRAE 62 ventilation testing * Ideal for Ventilation rate monitoring * Complies with ISO 21501-4 and JIS B9921 standards * Easy to clean and wipe down with minimal particle traps * Seamless integration into a facility monitoring system * Lightweight stainless steel enclosure * 2 year warranty, extended warranties available 7301-AQM/7302-AQM Remote Air Quality and Environmental Monitor Specifications * Size Range: 0.3 to 25μm * Flow rate: 0.1 CFM (2.83 LPM) * Battery Run Time: 10 hours * Count Alarms: 1 to 9,999,999 counts * Number of Channels: 6 * Operating Temperature: 41 to 104'F (5 to 40'C) * Operating Humidity: 20% to 95% non-condensing

Product introduction: This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications. Product advantages: All-in-one design, high integration and space saving installationï¼? Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed

> 2 x 2-wire, 4~20 mA or 0~10V DC outputs with RTD resistance output option > Any or both outputs can be assigned to RH or T or Dew point or specific derived physical quantity > RH & T range selection, parameter configuration and calibration with > USB to serial converter (DCC501) > Handheld configurator (HHC202) > Inbuilt LCD and 3 keys >. Health / status (Heartbeat) LED > Calculated physical quantities -Dew point -Absolute humidity -Heat index -Enthalpy -Air density > Isolated RS485 / MODBUS RTU or BACnet MS/TP > Replaceable RH+T sensor > Convenient installation with 2-part housing with fixed back and removable electronics > Stylish housing with vents for air flow across sensor for better accuracy

A single unit, based around a powerful 32-bit floating-point ARM microcontroller, designed to provide a complete analysis of local air quality. The unit deploys four electrochemical sensors, an NDIR CO2 sensor and a laser particle monitor. These combine with a temperature and relative humidity sensor, and GPS is used for accurate location and timestamping.There is also an optional microphone to provide ambient noise information. Data is stored locally and uploaded to a central management site. Specification accurate electrochemical cells (Alphasense A4) monitoring CO, NO, NO2 , and O3 down to ppb levels. Other gases can be sensed if required (eg SO2 ). digital NDIR CO2 sensor (Atmospheric Sensors/Alphasense or SenseAir). laser optical particle counter (Alphasense) to provide PM1, PM2.5 and PM10 readings. PID sensor for volatile organic compounds (VOCs) (Alphasense). temperature and relative humidity sensor (Atmospheric Sensors). high-sensitivity GPS module capable of accurate location and time measurement even inside buildings. microphone to characterise ambient noise, based on a hardware RMS level detector. data can be sampled at high rates, which are normally averaged over 20 seconds, with data transmission every 15 minutes. This can be configured to suit each application. communication link to remote database via GPRS. This includes the ability to 'store and forward' data in times when the network is down or temporarily overloaded. The unit requires a data-capable SIM card service, which can be provided either by Atmospheric Sensors or by other providers by discussion. local storage on 16GB SDCard of extended results from test for later recovery and to act as a backup of results sent over the GPRS link. mains power supply, with waterproof connector. externally visible LED to indicate unit status. the unit may be used either indoors, or outdoors if protected by a Stevenson Screen, or similar enclosure. Wall mount brackets are supplied with each unit, permitting easy installation.

TSP-16 Series IAQ Indoor Air Quality Monitor - Designed for hotels, houses and other public places to detect the indoor air quality * Experienced in designing IAQ product for 12 years, long term exportation to Europe and America, powerful performance guaranteed * Real-time detecting indoor PM2.5/PM10, CO2, TVOC, Temperature and relative humidity * Built-in self-owned patent measurements of temperature and humidity compensation technology * Suitable for hotels, residential projectsto analyze indoor air quality, and to control ventilation systems, etc. * Wall mounting, provide Modbus RS485 and WIFI optional * Basic function of indoor air detector TSP-16 Series IAQ Indoor Air Quality Monitor Features * IAQ detector designed for civilian use with affordable price * 24 hours online real-time IAQ detector * Real-time output PM2.5/PM10, CO2, TVOC and humidity data * Using special pattern to ensure the measurement value does not effected by the surrounding * Modbus RS485 interface and WIFI available,suitable for networks in existing and modern buildings * OLED displays real-time data (optional) * Indicators with three different colors to show range of IAQ density * Wall mounting, 24VAC/VDC power supply * With over 12 years' experience in designing IAQ products and long-term exportation to Europe and America, we provide a dozen of different types of IAQ * Products for different applications * RJ45 Ethernet interface product customizable TSP-16 Series IAQ Indoor Air Quality Monitor Main Application * Smart Home Systems * Residential projects * Hotels, class rooms, offices and other public places where need IAQ monitoring with civil level * Air quality monitoring in other public places

AS510 Remote Air Quality Monitor A single unit, based around a powerful 32-bit floating-point ARM microcontroller, designed to provide a complete analysis of local air quality. The unit deploys four electrochemical sensors, an NDIR CO2 sensor and a laser particle monitor. These combine with a temperature and relative humidity sensor, and GPS is used for accurate location and timestamping.There is also an optional microphone to provide ambient noise information. Data is stored locally and uploaded to a central management site. AS510 Remote Air Quality Monitor Specification * accurate electrochemical cells (Alphasense A4) monitoring CO, NO, NO2 , and O3 down to ppb levels. Other gases can be sensed if required (eg SO2 ). * digital NDIR CO2 sensor (Atmospheric Sensors/Alphasense or SenseAir). * laser optical particle counter (Alphasense) to provide PM1, PM2.5 and PM10 readings. * PID sensor for volatile organic compounds (VOCs) (Alphasense). * temperature and relative humidity sensor (Atmospheric Sensors). * high-sensitivity GPS module capable of accurate location and time measurement even inside buildings. * microphone to characterise ambient noise, based on a hardware RMS level detector. * data can be sampled at high rates, which are normally averaged over 20 seconds, with data transmission every 15 minutes. This can be configured to suit each application. * communication link to remote database via GPRS. This includes the ability to â??store and forwardâ?? data in times when the network is down or temporarily overloaded. The unit requires a data-capable SIM card service, which can be provided either by Atmospheric Sensors or by other providers by discussion. * local storage on 16GB SDCard of extended results from test for later recovery and to act as a backup of results sent over the GPRS link. * mains power supply, with waterproof connector. * externally visible LED to indicate unit status. * the unit may be used either indoors, or outdoors if protected by a Stevenson Screen, or similar enclosure. Wall mount brackets are supplied with each unit, permitting easy installation.

1. Introduction: New Air intelligent controller (KF-800F) can monitor real-time indoor temperature, CO2 concentration. Controller output signal can directly control the startup and speed of ventilator. It can be widely used in residential, commercial and industrial applications, and can effectively improve air quality, create a healthy, comfortable, energy-efficient living and working environment. 2. Buttons function 1. button: timing parameter setting 2. button: parameter increase 3. button: parameter reduce 4. button: setting working mode for controller, press this button slightly, the controller will be switched circularly betweenAUTO MANUAL TIMER POWER OFF. 3. Display explana4. Detailed explanation 1. AUTO (auto mode): high speed: CO2 concentration exceeds the setting concentration value of 300ppm; middle speed: CO2 concentration exceeds the setting concentration value of 100ppm; low speed: CO2 concentration exceeds the setting concentration value; stop: CO2 concentration is below the set concentration value. 2. MANUAL: set the ventilator as OFF(stop)LOW(low speed)MED(middle speed)HIG((high speed))by buttons and , and under this mode, the ventilator will run according to the setting, won¬H be affected by CO2 concentration. 3. TIMER (timing mode): run according to set time & speed, can set from Monday to Sunday, 4 periods every day, and 28 periods in total. 4. Automatic mode Cconcentration value setting when the ventilator starts: under the auto mode, press or button for one second, it will appear CO2 concentration setting value and flicker, then press and buttons to change the number (from 350 ¡§C 600ppm). Controller will return to normal working condition and save setting parameter automatically if you won¬H press any buttons more than 10 seconds during the setting process. 5. Timing parameter setting: press button for 2 seconds to enter parameter setting. First enter ¡ãlocal time adjust¡À, press button to switch week, hour and minute, the corresponding parameter will flicker, change the number by and buttons; after finishing adjusting local time, press button to enter the first period hour setting on Monday, press button to switch hour, minute, and ventilator speed, press and buttons to change the number. After finish the setting, press button to enter the second period hour setting on Monday. Repeat above steps to finish all the 28 periods setting. Controller will return to normal working condition and save setting parameter automatically if you won¬H press any buttons more than 10 seconds during the setting process. 6. Backlight: CO2 concentration less than 500ppm (green backlight), 500-799ppm (yellow backlight), higher than 800ppm (red backlight).

Whether you need additional office space at your corporate location or a portable office on the job site, Miami Conex has the container 10 foot office containers for you! These portable, secure, durable, and modular ground level office containers are a cost-effective and convenient solution for temporary or permanent office space. Miami Conex has four standard models ready to order, but if they do not meet your requirements, we can modify a container into the customized office space you need. Our standard mobile office containers are available in gray or beige, feature steel entry doors, double-pane windows, interior finishing including paneling, flooring, baseboard heat, and more. Thereâ??s even an option to install cable! Choose from a 10-foot, 20-foot, 40-foot, or 40-foot high-cube container, with office space only, or a combination of office and storage space. Miami Conex mobile container offices are fully customized and can be easily transported from one location to another. 10ft Office Containers for Sale Our� 10 foot� office containers have an outside dimension of� 10â?² x 8.5â?² x 8â?², making them an compact choice for all security needs. Our 10â?? office containers feature: Tile floors Doors (front or side) Windows Ventilation Electrical Restroom facilities Framed, insulated and drywall Air conditioning & Heat The 10ft office is also called Guard shack, Monitoring Station, Portable Office Our office containers are made from the same heavy duty steel frame found in our storage containers. These mobile office containers are designed for portable office use or as a construction office but may be moved from site to site and offer a secure portable onsite setup at remote locations. No matter what style of container office you need, Miami Conex can help find a solution to meet your needs and budget! Call us at� 1-(800) 705-5043� for a quick quote or fill out our� quick quote form. We offer these for sale and for rent in selected areas. You can read testimonials from many of our satisfied customers.

18K American Diamond Necklace Set Diamonds are a woman\'s best friend ! They add sparkle to your life. Fine quality american diamond specially curated and hand picked to deliver the best of experience. For a longer life - store the jewellery in an air tight pouch, keep away from water and perfumes. Clean it with dry and soft cloth. **Product colour may slightly vary due to photographic lighting sources or your monitor settings.

Q-988 Q-988E is a kind of universal remote controller for air-conditioners, controlling over 1000 different world famous brands of air-conditioners. It has large LCD monitor display and timmer function.

Indoor air quality monitor desktop carbon dioxide gas co2 meter detector, temperature humidity CO2 monitor Product: Mini Portable CO2 meter air quality monitor Model #: FS-H8 Product Size: 9x7x3.5cm (3.54x2.76x1.38inch) Functions: CO2 monitor + Temperature & Humidity display Power Supply: Built-in 1200mAh battery CO2 Concentration Range: 400PPM~5000PPM (Resolution: 1PPM; Accuracy: �±50PPM�±5%) Temperature Range: 0~70â?? (precision: �±2â??) Relative Humidity Range: 5~90% (precision: �±5%) Input Interface: Type-C (5V) Material: Plastic(ABS) CO2 Sensor: Infrared Warranty: 3 months after shipment Net/Gross Weight: 106/125g Accessories: User manual, USB cable

1. Introduction: New Air intelligent controller (KF-800E) can monitor real-time indoor temperature, humidity, VOC concentration. Built-in air quality sensor can monitor ammonia, formaldehyde, benzene, xylene, hydrogen, alcohol, carbon monoxide, methane, propane, Gan alkyl, styrene, propylene glycol, phenol and other Volatile organic compounds as well as wood, paper, cigarette smoke and a dozen combustion gasesController output signal can directly control the startup and speed of ventilator. It can be widely used in residential, commercial and industrial applications, and can effectively improve air quality, create a healthy, comfortable, energy-efficient living and working environment. 2. Monitoring objects 1. Volatile organic compounds (VOC) concentration¡¡100ppm Real-time monitoring indoor air whether including formaldehyde, benzene, ammonia, hydrogen, alcohol, carbon monoxide, methane, propane, Gan alkyl, styrene, propylene glycol, phenol, toluene, ethylbenzene, xylene and other volatile organic gas, such as cigarettes, wood , paper burning smoke or not. 2. Indoor temperature: 0---- +50 3. Indoor humidity: 5 H----95%RH 3. Function & Feature: 1. Real-time display indoor concentration of volatile organic compoundsVOC) 2. Display the current indoor air pollution levels 3. Real-time display the indoor temperature 4. Real-time display indoor humidity 5. According to temperature, humidity and VOC concentrations, automatically adjust the ventilator operation 6. Display the new air system ventilator statusStop, slow, medium and high speed, working modeManual, automatic, timing 7. Automatic mode±bè ` the intelligent controller detect indoor air quality become worse, the new air system can automatically adjust the ventilator speed 8. Manual mode  e can control the startup & speed of ventilator by ¡ãmode button on the controller panel or ¡ãRF remote control

Indoor Air Quality (IAQ) Monitor Airthinx's Indoor Air Quality monitor is the first Internet of things (IoT) device that delivers simultaneous real-time measurements of Particles (PM 1, PM 2.5, and PM 10), Gasses (VOCs, CO2, and CH2O), and Environmental Conditions (Temperature, Humidity, and Pressure) with the level of accuracy of an industry standard reference instrument, at a fraction of the cost. The portable monitor packs all of these sophisticated features into a modern lightweight product designed to work right out of the box-no need for configuration. Once mounted to any wall, it is always connected to the cloud and provides the user with access to all their data anytime, anywhere directly from the web. The Airthinx IAQ solution is developed and powered by Netronix's IoT platform and that ensures the highest standards of security, reliability, and scalability of the network. This enables the rapid deployment of devices in any indoor environment regardless of the infrastructure of the building. Indoor Air Quality (IAQ) Monitor Application * Buildings * Healthcare * Residential *Transportation Indoor Air Quality (IAQ) Monitor Specifications * PM1, PM2.5, PM10: 0.3~1.0; 1.0~2.5; 2.5~10 μm * CH2O Effective Range: 0~1 mg/m3 * CO2 Effective Range: 0~3000 ppm * TVOC Effective Range: 1 ~ 30 ppm of EtOH * Temparture Range: 0 - 99'C * Humidity Range: 0-99 %RH * Input Voltage: 5 VDC (micro-USB)

Indoor Air Quality Monitoring System measures the Quality of Air in the space we live in.

Indoor Air Quality Monitoring System measures the Quality of Air in the space we live in.

A wearable air quality monitoring system that makes use of a complementary range of sensing technologies to provide a complete and reliable assessment of the air quality in the immediate vicinity of the wearer. Electrochemical cells, a laser optical particle monitor, temperature and humidity sensors are included in the system, which also incorporates a highly-sensitive GPS receiver and 3 axis accelerometer. A microphone is fitted to monitor ambient noise. A basestation provides a docking unit to store the sensor unit at night and to allow access to a regulated 12V supply to power the battery charging circuit.The basestation is fitted with a GPRS modem, patch antenna and SIM card, which are used to transmit the data that are saved on the unit during the day to a central monitoring site. Specification accurate electrochemical cells (Alphasense A4) monitoring CO, NO, NO2, and O3. Other sensors available on request. optical particle counter (Alphasense). temperature and relative humidity sensor (Atmospheric Sensors). MEMS 3-axis accelerometer to detect movement. GPS module with integrated antenna microphone to detect ambient noise level. high-capability 32-bit ARM microcontroller. bi-colour LED to indicate battery state-of-charge and correct operation of the unit. battery and compatible charger circuit to give 24 hours running and some contingency (two 18650 lithium-Ion cells). SD Card storage up to 32GB. supplied with a shoulder strap and belt clip so can be worn in different ways.

Air quality monitor, fresh air machine.Transportation