Test voltage(contact to contact):: 0.7--2.1 kv rms rated current: 1.5--35 a operating temperature range: - 50¡æ--125¡æ ingress protection: ip50 humidity: up to 95% at 60oc vibration: 10-2000hz, 15g As per specified
K Series Main features: 1. Smart push-pull self-latching system; 2. Multicore types with 2 to 26 pins; 3. Solder or PCB contacts (straight and elbow); 4. High packing density for space saving; 5. Different kinds of keying options to avoid mismatching; 6. 360 degree screening for full EMC shielding; 7. Waterproof connecter (IP66 to 68); 8. Rugged housing for extreme working conditions; 9. Interchangeable with LEMO&ODU connector. Parts of connector: 1) Shell made of copper alloy, stainless steel is used in special occasions, plated with Nickel or Chrome; 2) Pin and jack made of copper alloy, plated with gold; 3) Insulator molded with engineering plastic which is high-temperature endurable and good insulating; 4) Sleeve molded with soft plastic to protect cables
K Series Main features: 1. Smart push-pull self-latching system; 2. Multicore types with 2 to 26 pins; 3. Solder or PCB contacts (straight and elbow); 4. High packing density for space saving; 5. Different kinds of keying options to avoid mismatching; 6. 360 degree screening for full EMC shielding; 7. Waterproof connecter (IP66 to 68); 8. Rugged housing for extreme working conditions; 9. Interchangeable with LEMO&ODU connector.
Metal or plastic push pull circular connector, alternative solution for LEMO.
K Series Main features: 1. Smart push-pull self-latching system; 2. Multicore types with 2 to 26 pins; 3. Solder or PCB contacts (straight and elbow); 4. High packing density for space saving; 5. Different kinds of keying options to avoid mismatching; 6. 360 degree screening for full EMC shielding; 7. Waterproof connecter (IP66 to 68); 8. Rugged housing for extreme working conditions; 9. Interchangeable with LEMO&ODU connector. Parts of connector: 1) Shell made of copper alloy, stainless steel is used in special occasions, plated with Nickel or Chrome; 2) Pin and jack made of copper alloy, plated with gold; 3) Insulator molded with engineering plastic which is high-temperature endurable and good insulating; 4) Sleeve molded with soft plastic to protect cables
1) security of the push-pull self-latching system; 2) multicore types with 2 to 32 pins; high-density installation for space-saving; 3) soldering, crimping and pcb contacts 4) straight or elbow (90 degree) 5) multiple key options to avoid mismating between similar connectors; 6) 360-degree screening for full emc protection 7)keying system(g is standard key) for connector alignment. Custom
1.LEMO connector, mini connector 2.copy of the lemo connector, but the technist can meet the requirement 3.shell size:0,1,2 The circular electronic connector are designed for the connection between sensors and electronic instruments or equipments .The connector is compact and its push-pull elf-laching connecting system allows the connector to be mated simply
Specifications Material Specification: Housing: High Temperature thermoplastics: LCP; Color: Black Contact: Phospor Bronze/Brass Shell: Brass/Phospor Bronze/SUS301 Plated: Contact: gold plated (G/F,5U"/10U''/15U''/30U'') Shell: Gold/Nickel Materials and plating can be changed according to customer definition. Mechanical Characteristics: 1,Insertion Force:35 N Max; 2,Extraction Force:10N Min(Initial) 3,Durability Life:50000 Times. Electrical Characteristics: Contact Current Rating:0.5 Amperes Dielectric Withstanding Voltage: AC 500V r.m.s Insulation Resistance: ¡Ý100M¦¸ Contact Resistance: ¡Ü100m¦¸ Operating Temperature:-25 oC - +85 oC Environmental Spec. Have passed below tests: 1.Salt Fog Test 2.AIR Reflow Soldering Test 3.Mechanical Vibration Test 4.Adhered Tin Test 5.Temperature Cycle Test Application: Computer, MP3 player, MP4 player, digital video and camera, PADs, GPS,flash drive and cable ASSY 1000PCS/Bag,5000PCS/Carton
K Series Main features: 1. Smart push-pull self-latching system; 2. Multicore types with 2 to 26 pins; 3. Solder or PCB contacts (straight and elbow); 4. High packing density for space saving; 5. Different kinds of keying options to avoid mismatching; 6. 360 degree screening for full EMC shielding; 7. Waterproof connecter (IP66 to 68); 8. Rugged housing for extreme working conditions; 9. Interchangeable with LEMO&ODU connector. Parts of connector: 1) Shell made of copper alloy, stainless steel is used in special occasions, plated with Nickel or Chrome; 2) Pin and jack made of copper alloy, plated with gold; 3) Insulator molded with engineering plastic which is high-temperature endurable and good insulating; 4) Sleeve molded with soft plastic to protect cables
K Series Main features: 1. Smart push-pull self-latching system; 2. Multicore types with 2 to 26 pins; 3. Solder or PCB contacts (straight and elbow); 4. High packing density for space saving; 5. Different kinds of keying options to avoid mismatching; 6. 360 degree screening for full EMC shielding; 7. Waterproof connecter (IP66 to 68); 8. Rugged housing for extreme working conditions; 9. Interchangeable with LEMO&ODU connector. Parts of connector: 1) Shell made of copper alloy, stainless steel is used in special occasions, plated with Nickel or Chrome; 2) Pin and jack made of copper alloy, plated with gold; 3) Insulator molded with engineering plastic which is high-temperature endurable and good insulating; 4) Sleeve molded with soft plastic to protect cables
Lemo, mini-lemo: Circular connectors, also called "push-pull" or "quick connect/disconnect", are commonly used in non-destructive testing (ndt), physics, and aerospace, on transducers, flaw detectors, and other applications. This style of connector was pioneered several decades ago by the swiss connector manufacturer lemo. Because of this history, practitioners in the industries that use this connector style still tend to call this a "lemo connector", even though there are now multiple manufacturers making compatible connectors. "lemo" is a registered trademark of lemo usa. We source our connectors from multiple vendors. The connector we provide to you may be made by lemo, or may be a compatible model from an aftermarket manufacturer. Our circular connectors come in two different sizes. The l00 connectors have a diameter of roughly 0.25", and are often used in physics and engineering applications for interconnection between nim/camac modules. If you are looking for the larger 0.5" diameter connector
ECG cables also referred to as an ECG patient cable, is a type of cable connection designed for non-invasive heart monitoring, typically used to help diagnose potential heart issues. The ECG cable connects to electrodes which are positioned at specific locations on the patientâ??s body to detect and record heart muscle electrical activity. The cables then transmit the electrical activity back to the ECG device for analysis and diagnosis by medical professionals. ECG Cable Feature [Multiple Leads]: ECG cables usually have several leads placed in specific areas on the patientâ??s body, such as the chest, arms, and legs, to measure the heartâ??s electrical activity from different angles. [Durability]: ECG cables are constructed from top-quality, sturdy materials that can endure repeated bending, tugging, and twisting without sustaining any damage. This ensures that the cables can withstand the rigors of frequent use and remain reliable over time. [Shielding]: ECG cables are shielded to block out external electrical signals, which can interfere with the accuracy of the readings. [Connector Compatibility]: The ECG cables are available with various connector types, including snap, clip, and banana, to fit different types of ECG machines. [Safety]: ECG cables are designed to meet strict safety standards and regulations to ensure patient safety. This helps to ensure that patients are protected from any potential harm during the monitoring process. [Cleaning and Disinfecting]: The ECG cables are easy to clean and disinfect to maintain hygienic conditions, as they come into contact with the patientâ??s skin. ECG Cable Advantages [Excellent Performance]: ECG cables are built to withstand the rigors of twisting and bending, and have been thoroughly tested to ensure optimal performance. The cables are also equipped with electrical shielding to protect the signal integrity, ensuring accurate readings. [Non-Invasive]: ECG cables are non-invasive, which means that they do not require any incisions or invasive procedures. This reduces the risk of infection and makes the monitoring process much safer for patients. Instead, the cables are simply attached to the patient's skin, making it a quick and painless process.
K Series Main features: 1. Smart push-pull self-latching system; 2. Multicore types with 2 to 26 pins; 3. Solder or PCB contacts (straight and elbow); 4. High packing density for space saving; 5. Different kinds of keying options to avoid mismatching; 6. 360 degree screening for full EMC shielding; 7. Waterproof connecter (IP66 to 68); 8. Rugged housing for extreme working conditions; 9. Interchangeable with LEMO&ODU connector. Parts of connector: 1) Shell made of copper alloy, stainless steel is used in special occasions, plated with Nickel or Chrome; 2) Pin and jack made of copper alloy, plated with gold; 3) Insulator molded with engineering plastic which is high-temperature endurable and good insulating; 4) Sleeve molded with soft plastic to protect cables
K Series Main features: 1. Smart push-pull self-latching system; 2. Multicore types with 2 to 26 pins; 3. Solder or PCB contacts (straight and elbow); 4. High packing density for space saving; 5. Different kinds of keying options to avoid mismatching; 6. 360 degree screening for full EMC shielding; 7. Waterproof connecter (IP66 to 68); 8. Rugged housing for extreme working conditions; 9. Interchangeable with LEMO&ODU connector. Parts of connector: 1) Shell made of copper alloy, stainless steel is used in special occasions, plated with Nickel or Chrome; 2) Pin and jack made of copper alloy, plated with gold; 3) Insulator molded with engineering plastic which is high-temperature endurable and good insulating; 4) Sleeve molded with soft plastic to protect cables
K Series Main features: 1. Smart push-pull self-latching system; 2. Multicore types with 2 to 26 pins; 3. Solder or PCB contacts (straight and elbow); 4. High packing density for space saving; 5. Different kinds of keying options to avoid mismatching; 6. 360 degree screening for full EMC shielding; 7. Waterproof connecter (IP66 to 68); 8. Rugged housing for extreme working conditions; 9. Interchangeable with LEMO&ODU connector. Parts of connector: 1) Shell made of copper alloy, stainless steel is used in special occasions, plated with Nickel or Chrome; 2) Pin and jack made of copper alloy, plated with gold; 3) Insulator molded with engineering plastic which is high-temperature endurable and good insulating; 4) Sleeve molded with soft plastic to protect cables
K Series Main features: 1. Smart push-pull self-latching system; 2. Multicore types with 2 to 26 pins; 3. Solder or PCB contacts (straight and elbow); 4. High packing density for space saving; 5. Different kinds of keying options to avoid mismatching; 6. 360 degree screening for full EMC shielding; 7. Waterproof connecter (IP66 to 68); 8. Rugged housing for extreme working conditions; 9. Interchangeable with LEMO&ODU connector. Parts of connector: 1) Shell made of copper alloy, stainless steel is used in special occasions, plated with Nickel or Chrome; 2) Pin and jack made of copper alloy, plated with gold; 3) Insulator molded with engineering plastic which is high-temperature endurable and good insulating; 4) Sleeve molded with soft plastic to protect cables
K Series Main features: 1. Smart push-pull self-latching system; 2. Multicore types with 2 to 26 pins; 3. Solder or PCB contacts (straight and elbow); 4. High packing density for space saving; 5. Different kinds of keying options to avoid mismatching; 6. 360 degree screening for full EMC shielding; 7. Waterproof connecter (IP66 to 68); 8. Rugged housing for extreme working conditions; 9. Interchangeable with LEMO&ODU connector.
K Series Main features: 1. Smart push-pull self-latching system; 2. Multicore types with 2 to 26 pins; 3. Solder or PCB contacts (straight and elbow); 4. High packing density for space saving; 5. Different kinds of keying options to avoid mismatching; 6. 360 degree screening for full EMC shielding; 7. Waterproof connecter (IP66 to 68); 8. Rugged housing for extreme working conditions; 9. Interchangeable with LEMO&ODU connector. Parts of connector: 1) Shell made of copper alloy, stainless steel is used in special occasions, plated with Nickel or Chrome; 2) Pin and jack made of copper alloy, plated with gold; 3) Insulator molded with engineering plastic which is high-temperature endurable and good insulating; 4) Sleeve molded with soft plastic to protect cables
K Series Main features: 1. Smart push-pull self-latching system; 2. Multicore types with 2 to 26 pins; 3. Solder or PCB contacts (straight and elbow); 4. High packing density for space saving; 5. Different kinds of keying options to avoid mismatching; 6. 360 degree screening for full EMC shielding; 7. Waterproof connecter (IP66 to 68); 8. Rugged housing for extreme working conditions; 9. Interchangeable with LEMO&ODU connector. Parts of connector: 1) Shell made of copper alloy, stainless steel is used in special occasions, plated with Nickel or Chrome; 2) Pin and jack made of copper alloy, plated with gold; 3) Insulator molded with engineering plastic which is high-temperature endurable and good insulating; 4) Sleeve molded with soft plastic to protect cables
K Series Main features: 1. Smart push-pull self-latching system; 2. Multicore types with 2 to 26 pins; 3. Solder or PCB contacts (straight and elbow); 4. High packing density for space saving; 5. Different kinds of keying options to avoid mismatching; 6. 360 degree screening for full EMC shielding; 7. Waterproof connecter (IP66 to 68); 8. Rugged housing for extreme working conditions; 9. Interchangeable with LEMO&ODU connector. Parts of connector: 1) Shell made of copper alloy, stainless steel is used in special occasions, plated with Nickel or Chrome; 2) Pin and jack made of copper alloy, plated with gold; 3) Insulator molded with engineering plastic which is high-temperature endurable and good insulating; 4) Sleeve molded with soft plastic to protect cables
