Our shunts have very good quality with ROHS, CE, etc. The accuracy can be produced at Class0.1~Class0.5, 50mV, 55mV, 60mV, 75mV, 100mV, etc.; shunts are nickel plated, end fittings of copper/brass, resistor bars of manganin.
We are involved in production of shunt Reactor. It is used in Large Reactor Transformers. We offer shunt reactor in built form / full column as per Customer Specification. We are using unique technology of Edge Chamfering. We can supply cakes with OR without edge chamfer as per customers requirement. Edge Chamfer reduces vibration, noise and in turn improves performance of shunt reactor.
Unique and state of the art edge chamfering technology.
Shunt reactors are produced upto 2500 mm height in single column.
Columns above 2500 mm height will be supplied in 2 parts.
Max. Column Diameter 1200 mm
We use ceramic spacers to maintain air gap.
Steatite and high Alumina ceramics are used.
We make cores up to 400 MVAR 1200 kV class.
***5-Port 10/100TX Slim Industrial Ethernet Switch***
| Extended Operating Temperature -40° ~ 80° C (-40° ~ 176° F) | Store and Forward Switching Architecture | Flow Control on Full-Duplex | Back Pressure on Half-Duplex | Supports Auto MDI/MDI-X Function | Wide-Ranging Redundant Power Design | UL Class I, Division 2 Certified | DIN-Rail and Wall Mount Design | Slim IP-30 Case Design |
This type CT is designed for easyinstallation in tight spaces and environment without removing the main busbaror cable .The connector uses the holding pressure of folding structure. Safetyisolation to protect the user from direct contact with the electrifiedbody.Meet the 600V,CATIII secure degree.
Features:
.Flexibleand light weights,exquisite appearance
.Easily&quick installation in tight spaces
.Excellentlinearity
.Maximummeasuring current up to 550A
Applications:
.Power quality monitoring
.Smart logger
.Distributed measurement systems
Mechanical Dimension:
462.png
Technical index:
Item
Parameter
Rated Primary
500A AC
Output voltage
1Mv AC/A
Amplitude Accuracy
±0.3%rdg. ±0.01%f.s.(f.s:500A,45Hz-66Hz,primary conductor in the center)
Phase Accuracy
±0.5º(10-100%IIn )(45Hz-5kHz)
The Amplitude Frequency Characteristic
±1%(45Hz-5kHz)(Deviation Accuracy)
Conductor Impact
±0.5%(off-center)
The influence of external electromagnetic fields
=0.1A(In AC 400A/m electromagnetic fields)
Maximum input current
550A AC Continuous (45-66Hz,Ambient temperature50º C
Temperature Coefficient
0.02%reading data /º C
Dielectirc strength
5312V ACrms/continue15seconds(circuits-iron core)
The Maximum rated voltage
600V crms
Operating temperature &humidity
0 to 50º (32-122º F), =80%RH(NO condensate)
Storage temperature &humidity
-10º C to60º C(14-140º F), =80%RH(NO condense)
Indoors operating environment ,UP to 2000m above sea level
Applicable Standards
Safety:EN 61010-2-032:2002,CATIII ,Contamination II
EMC:EN 1326:1997+A1:1998+A2:2001+A3:2003(classA)
Measurable conductor diameter
=Ø46mm
Cable Length
About3M
Dimension
About 79W*159H*40Dmm (Excluding Protruding parts)
Weight
About 380G
Especially PARENTNashik is expert of making various type of custom laminated copper flexible shunt | links in different shape & sizes to suit your applications even in switchgear industries.Â
Made from electrolytic copper foil of requisite thickness
Manufactured by stacking foils and applying high current under pressure for metal bonding without any filler material
Metal diffusion gives homogenous bond and constant cross section across length
Offer equivalent current carrying capacity like solid busbar
Gives flexibility in connection, drilling, brazing, welding is possible
Processed studying customer requirements and application
Used as Flexible Expansion Joint in an electrical circuit to bear thermo-dynamic stresses.
Liquid Cooled Charging Cables are electric vehicle charging cables that utilize liquid cooling to achieve high-speed charging. These cables feature a 500A current rating and a 1000V voltage rating for charging speeds up to 500KW.
Container made of stainless steel plate.
Polypropylene film is treated with double side rough processing for easy impregnation.
Polar plate is made of ultra thin aluminium foil.
Internal fuses protects the capacitor in case of breakdown or failure.
Conforming Standard: IEC 60871
Capacitance tolerance : -3%~+5%
Frequency: 50/60 Hz
Running no longer than 8 hours out of every 24 hours under 1.1 times of Un.
Running under stable over current, highest value of which reaching 1.3 times of In, caused by over voltage and high harmonic. As for capacitor with max positive deviation, the value of stable over current can be as 1.43 times high of In.
Current shunt resistor FL2-75mV
YOYIK, a Chinese brand that is also influential in the international market, has demonstrated the strength of "Made in China" by exporting high-quality power station equipment and accessories. The company's products are exported to Europe, America, Southeast Asia and other places, not only because of their excellent performance, but also because of the company's strict compliance with international standards and the international layout of the service system. YOYIK seeks development and shares results with global partners with an open attitude.
Yoyik can offer many spare parts for power plants as below:
#DF-Current shunt resistor FL2-75mV-DF
DETECTOR LEAK KQF1500
Rotation Speed Sensor DF6101-005-065-01-03-00-00
SPEED SENSOR TURBINNE & GENERATOR CS-1(G-065-02-01)
Flow indicator LZG15-20
Voltage transducer CE-VM01-52MS1-0.2 300V/4~20mA. 12VDC
Communicate cable RVVP 4*0.3mm2
Auxiliary power PSMU-1-5V/480W
Sensor DF310580-50-10-00
Conductivity meter electrode probe 4073
Position Monitor DM-9
LVDT Sensor ZD-2000TDA
Aluminized light-proof film BRS-300
eddy current position sensor WTO110-A00-B00-C05-D10
Thermal expansion sensor TD-02-25
Eddy Current Sensor PR6424/100-140
SPEED PICKUP,SENSOR,MAGNETIC T03S
speed sensor CS-1G-100-02-01
Eddy Current Sensor PR6422/003-041
Eddy Current Sensor PR6424/102-010
PRESSURE SWITCH TBN JACKING OI 9NN-EE45-M4-C1A-X371
SPEED MONITOR XJZC-03A/Q
Monitoring protection card MPC4 200-510-SSS-1Hh
DEH CONTROL CARD FBMSVH
Bolt heater DC120 ZJ20-310RC
connector M1PC1A 0.6-1.4a
Limit switch DXP-T21GN
transmitter XCBSQ-02-300-02-01
Remote I/O collection box DY-24C
indicator RC861CZ090HSSYR
PRESSURE SWITCH BH-003001-003
Dold Emergency Stop and Safety Gates LG 5925.48/6X
AMMETER 6L2-A
Steam turbine bolt electric heating rod ZJ-20-T20
Eddy Current Sensor PR6422/104-030
LVDT sensor TD-1 0-100mm
Flame amplifier 2653-206-01
Current shunt resistor FL2-75mV
MY-DFYL-2025-3-5
Technical Parameter
Model: 500A
Max. drill depth: 400m
Drill diameter: 110-450mm
Working air pressure:1.05-3.45Mpa
Air consumption:16-85 m3/min
Drill rod length: 3m
Drill rod diameter: 89mm;108mm; 114mm;140mm;
Reverse drill rod: 108mm,127mm
Axial pressure: 5t
Lifting force: 20t
Slow lifting speed: 4.2m/min
Slow feed speed: 5.2m/min
Fast lifting speed: 30m/min
Fast feed speed: 37m/min
Rotation torque: 8500Nm;4250Nm
Rotation speed:0-90r/min;0-180r/min
High landing leg travel distance:1400mm -Optional
Penetration rate:10-25m/h-Down hole drilling with hammer
Travel speed:2.5Km/h
Weight:11.5 t
Whole dimension:6.5x2.1x2.8m
Application formation: Unconsolidated layer or bedding rock
Application: Water well or Pilling engineering
Drill method: Mud or downhole hammer drilling
Hammer: Intermediate or high air pressure series
Rated Capacitance: 1 kvar-200 kvar
Rated Voltage: 0.13 kVac- 2 kVac
Application: Power Factor Correction (PFC) capacitors are widely used for reducing the reactive power which is created by production machines.CABO produces 1 or 3-phase PFC-Capacitors up to 50 kvar. All capacitors are equipped with an overpressure fuse andfilled either with oil or gas for highest quality and safety.
Nominal system voltage
Rated current
Rated power
Rated reactance
Rated reactance rate
Mode of installation(horizontal or stacked)
Working environment(indoors or outdoors)
Angle between inlet and outlet
Dry type air core series reactor, dry type air core current limiting reactor, dry type air core filter reactor, dry type air core shunt reactor, dry type air core smoothing reactor.
Decade Resistance Box are precision instruments intended for general laboratory use, R&D and educational purposes. These are used as a multiplier, shunt, substitution resistor, or as an arm for AC or DC bridges.
Specifications
Metal Film Resistor Accuracy 1%
Power Rating 1Wat
Maximum Working Voltage 500 Volts.
371 500A Shunt Suppliers
Short on time? Let 500A Shunt sellers contact you.
