Product characteristics: 1.Superlubrication Lift engine power more than 12%! The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%. 2.The ultimate wear resistance Save fuel up to 15%! The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%. 3.Shock absorption and noise reduction Effectively reduce noise by more than 6%! The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced. 4.Deep repair Effectively repair engine wear, prolong engine life by 2 times! Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times. 5.Cleaning and energy saving Remove more than 85% of oil mud carbon, reduce the number of engine cleaning! The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost. 6.Extension period Extend the oil exchange cycle by more than double. Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice. 7.Green environmental protection CO (carbon monoxide) emissions decreased by 90% . The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.
Terry towels, textile made ups, agriculture products, essential oils, sugar icumsa 45, sugar s 30, copper cathodes, copper concentrate, copper ore, iron ore, cobalt, zinc, bauxite, limestone, cement etc..Exporters
[Alias] foaming powder; sodium lauryl sulfate; sodium lauryl sulfate; sodium dodecyl sulfate, sodium dodecyl sulfate [English name] Sodium dodecyl sulfate. [Abbreviation] SDS [CAS No.] 151-21-3 [Molecular formula] ROSO3Na R = C12alkyl, C12-C14alkyl [Molecular weight] 288.38 (R = C12alkyl), 296 (R = C12-C14alkyl) [Grade] It can be divided into industrial grade (GB/T15963-2008), toothpaste grade (QB/T2900-2012), latex grade and reagent grade according to application fields and standards. [Technical Indicators] [Performance and Applications] This product is a white or yellowish sticky substance, commonly used in detergents and textile industry. Belon to an anionic surfactant.It is easy to dissolve in water, has good compatibility with anions and nonions, and has good emulsification, foaming, penetration, decontamination and dispersion properties. It is widely used in toothpaste, shampoo, shampoo cream, shampoo, washing powder, liquid washing, cosmetics and plastic demoulding, lubrication, pharmaceutical, papermaking, building materials, chemical and other industries. (1) Used as detergent and textile auxiliaries, also used as toothpaste foaming agent, mine fire extinguishing agent, emulsion polymerization emulsifier, wool detergent, etc. (2) Used as anionic surfactant, emulsifier and foaming agent (Use 3) GB 2760-96 stipulates that it is a processing aid for food industry. Blowing agent; emulsifier; anionic surfactant. Used for cake, beverage, egg white, fresh fruit, fruit juice beverage, edible oil, etc. (4) It is used as an emulsifier for drugs, cosmetics and synthetic resins. Foaming agent for toothpaste and fire extinguisher. Used as a detergent for fine silk and wool fabrics. Flotation agent for metal beneficiation. (5) Used as detergent and textile auxiliaries, also used as toothpaste foaming agent, fire extinguishing foam liquid, emulsion polymerization emulsifier, pharmaceutical emulsion dispersant, shampoo and other cosmetics, wool detergent. (Use 6) Biochemical analysis, electrophoresis, ion pair reagent
* Packing Unit: 1L/12Box * Type: VHVI-Based 100% Synthetic Premium Engine Oil * Features: - Developed for Catalyst Compatible Oils - API SP, ACEA C2/C3 * Available Capacities: 1L, 4L, 6L, 20L, 200L (For MOQ and pricing, please inquire) * SAE Grade: 5W-30
* Packing Unit: 1L/12Box * Type: 100% synthetic premium engine oil based on PAO * Features: - Excellent low temperature fluidity - API SP, ACEA C2/C3 * Available Capacities: 1L, 4L, 6L, 20L, 200L (For MOQ and pricing, please inquire) * SAE Grade: 0W-30
* Packing Unit: 1L/12Box * Type: 100% VHVI-Based Synthetic Engine Oil * Key Benefits: - Prevents Low-Speed Pre-Ignition (LSPI) - Extends Oil Change Intervals - Improves Fuel Economy - Ensures Superior Engine Cleanliness and Durability * Compatibility: Suitable for All Gasoline and LPG Engine Vehicles * Available Capacities: 1L, 4L, 6L, 20L, 200L(For MOQ and pricing, please inquire) * SAE Grade: 5W-30
* Packing Unit: 1L/12Box * Type: 100% VHVI-Based Synthetic Engine Oil * Features: - BMW Longlife-04 - MB-Approval 229.31 / 229.51 / 229.52 - Opel OV0401547-D30 / G30 - RN0700 / 0710 - API SP, ACEA C2/C3 * Available Capacities: 1L, 4L, 6L, 20L, 200L (For MOQ and pricing, please inquire) * SAE Grade: 5W-30
* Packing Unit: 1L/12Box * Type: Top Quality Diesel Engine Oil (EURO 6) * Features: - Optimized for EURO 6 standards - Reduces emissions - Maintains high engine performance output - API CK-4, ACEA E11 / E7 certified * Available Capacities: 1L, 4L, 6L, 20L, 200L (For MOQ and pricing, please inquire) * SAE Grade: 10W-40
* Packing Unit: 1L/12Box * Type: Premium Diesel Engine Oil * Features: - Provides excellent engine protection and satisfaction - Maintains superior engine performance - Promotes superior engine cleanliness - API CI-4, ACEA E7 Certified * Available Capacities: 1L, 4L, 6L, 20L, 200L (For MOQ and pricing, please inquire) * SAE Grade: 10W-40
* Packing Unit: 1L/12Box * Type: 100% Low Viscosity Synthetic Premium Engine Oil * Key Benefits: - Formulated with High-Performance Additives - Full Synthetic (100% Group 3 Base Oil) - API SP, ILSAC GF-6B / GF-6A Certified * Available Capacities: 1L, 4L, 6L, 20L, 200L(For MOQ and pricing, please inquire) * SAE Grade: 0W-20
Product Description Texol Ultra Max 5W30 API SP is a fully synthetic oil formulated with a balanced additive component system designed to deliver outstanding engine protection. It meets and exceeds the industry's toughest standards and requirements. It provides protection against the potential for pre-ignition in the (TGDI) engine. Fully meets the requirements of the ILSAC GF-5, API SP and GM: dexos1 Gen 3 specifications. Applications Texol Ultra Max 5W30 SP is designed to use in modern gasoline powered engines, turbo charged engines and multi-valve injected engines. Features and Benefits Delivers enhanced performance in the areas of wear protection, piston cleanliness, and fuel economy. Delivers quick cold starts with outstanding low-temperature Properties. Reduces the friction to maximize the horsepower. High Resistance to oil degradation. Provides Turbocharger cleanliness and Turbo coolant temp control Specifications and Approvals GM: dexos1 Gen 3 API: SP ILSAC: GF-5 Health and Safety Detailed health and safety information for this product is provided in a Material Safety Data Sheet which is available upon request from our Texol sales office.
PAO 4 - 10 CST Product Uses: The 4-10 CST PAOs are used as synthetic base fluids for high-performance industrial and automotive lubricants (e.g., gear oils, compressor oils, hydraulic fluids, greases, engine oils) and functional fluids (e.g., dielectric, heat transfer, drilling). Almost all products go into lubricant applications.
FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47
We are exporter of Arabic Gum Or (Acacia Gum). Organic Gum Arabic (Acacia) is an emulsifier for flavor oils and essential oils, making them stable in water-based compounds. A 30/70 ratio of gum to water is recommended as the best starting point for a Gum Arabic solution. It can be mixed at a 6/1 ratio of gum to oil. It can be used in cosmetics, baking, and as a fiber supplement. Organic Gum Arabic (Acacia) is vegan, kosher, and gluten-free. The Sudanese Organic Gum Arabic Acacia Senegal Heshab is the best in quality all over the world.
GraThick is a Physically Modified starch, Vegan, Gluten-Free, Plant-based, Non-GMO starch. It is produced by Physical modification of starch to enhance its thickening and stabilizing properties. It is used as functional food ingredient to improve the consistency of RTC gravies and gravy bases. As Thickener: GraThick is primarily used as thickener for RTC Gravies and gravy bases. It improves the consistency of gravies without hindering taste and flavour components. The starch granules in GraThick absorb liquid when added to the product. The granules starts swelling when heated, and then burst, releasing starch into liquid. The granules swell up to 30 times their original size resulting in increased thickness and consistency of the product. As Stabilizer: RTC (Ready â??To- Cook) gravies and gravy bases usually undergo retort packaging to increase the shelf life. GraThick helps to maintain the stability of the product while retort packaging. RTC gravies will be reconstituted with water before using. GraThick maintains the consistency and thickness of the product while reconstitution also. ï?· GraThick can be used in the preparation of all types of RTC Veg and Non- veg gravies ï?· It can also be used in gravy â?? bases of all cuisines(Traditional and International) ï?· It can also be used in RTU Gravy masalas DOSAGE Use 1 to 3% GraThickTM of total batch size. For excellent results, maybe use upto 5% GraThickTM of total batch size.
Contains omega-3 (up to 12%) and omega-6 (up to 19%), eicosanoic acid (up to 14%), erucic acid (up to 50%), oleic acid (up to 30%). Contains vitamin complex: group B vitamins, vitamins E, K, D, A, P. Helps to stay away from coronary heart diseases It can be used as an antibacterial oil Helps to detoxify human body Helps to reduce hair fall through improved blood circulation if it is massaged on scalp Stimulates digestion, circulation and excretory system It can be used as an irritant for stimulating sensation in senseless organs and muscles. Irritants are also useful for driving up muscles. Helps preventing fungal growth, thus it can be used as anti-fungal Helps in winter for making body warm and
Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
Quick Details Type:Rapeseed Oil Product Type:Nut & Seed Oil Processing Type:Refined Refined Type:Hydrogenated Oil Cultivation Type:Organic Packaging:Bulk, Can (Tinned), DRUM, Gift Packing, Glass Bottle, Mason Jar, Plastic Bottle, Vacuum Pack Purity (%):100 Grade:A Volume (L):5 Brand Name:Refined Canola Oil Model Number:Refined Canola Oil High Quality 100% Refined Canola Oil:Cooking Oil Product name: Rapeseed Oil Canola Oil:100% Refined Rapeseed Oil:100% Refined Rapeseed Cooking Oil Keywords:Canola Food Oil Use:Cooking Food Quality:100% Nature Application:Home Cooking Sunflower Meal Protein: 35.5% Min Fiber: 21% Max Moist: 12% Max Fat: 2.0% Max Packaging Plastic Bottle, Bulk, Can (Tinned), Drum, Flexi tank in transparent PET bottle----1L, 2L, 3L, 4L and 5L (With Handle). In jerry can---- 5L, 10L, 20L, 25L and 220L. In metal tin----16L, 14kg (with or without carton), 15L /15 kg, 16 kg (with or without carton), 17L/17kg, 18L /18 kg, 20L metal tin with bung hole (Round or Square) In metal drum---- 200L In flexi tank---- 20MT/20 FCL Buyer makes 40% T/T deposit upon signed Proforma Invoice. 30% T/T against full shipping document. Then a balance of 30% T/T to be paid upon confirmation of the arrival of goods at buyers destination port.
Specification Material Mix Coconut Shell Hardwood Charcoal Ash Content 20 Calorie 6000 6500 kCalkg Burning Time 5 6 hours Volatile Meter 2357 Fix Carbon 50 60 Application Barbeque We can produce barbeque briquettes according to customers desired custom specifications Variants 5X10 cm 1kg 6pcs 5X20 cm 1kg 3pcs Min Order 1 X 20 FCL Packing custom packaging one color Price 950ton for a mix coconut hardwood 750ton for 100 hardwood Price for FOB Jakarta Indonesia Prices are Negotiable
Specification Material 100 Coconut Charcoal Ash Content 23 Moisture Max 7 Calorie Max 7700 kCalkg Burning Time 2 25 hours Smell No Odor No We can produce shisha briquettes according to the customers desired custom specifications Variants 20X48 mm 1kg 64pcs Min Order 1 X 20 FCL Packing inner plastic inner box master box full color Price 135
