4A Molecular Sieve Suppliers and Manufacturers

4a molecular sieve Size: bead, 1.5-1.7mm/ 2-4mm Sphere, 1.6mm/ 3.2mm

Introduction Chemxin molecular sieve type 4a is an alkali alumino silicate; it is the sodium form of the type a crystal structure. 4a molecular sieve has an effective pore opening of about 4 angstroms (0.4nm). Chemxin type 4a molecular sieve will adsorb most molecules with a kinetic diameter of less than 4 angstroms and exclude those larger. Such adsorbable molecules include simple gas molecules such as oxygen, nitrogen, carbon dioxyde and straight chain hydrocarbons. Branched chain hydrocarbons and aromatics are excluded. Regeneration Chemxin molecular sieve type 4a can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes. To remove moisture from a 4a molecular sieve, a temperature of 250-280°c is required. A properly regenerated molecular sieve can give moisture dew points below -100°c. The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process Size 4a - zeolites are available in beads of 1-2 mm(10x18 mesh), 2-3 mm(8x12 mesh), 2.5-5 mm(4x8 mesh) and as powder, and in pellet 1.6mm, 3.2mm. Attention To avoid damp and pre-adsorption of organic before running, or must to be reactivated.

Item limits test method Ignition loss(800¦, 1h) 201% q/qzh01-94, 5.4 C.E.C ca ion exchangecapacity 32010mgcaco3/g qb 1768-93 Mgcaco3(dry) White grade(w=y) 970.5% gb/t13176.1 Grain size(micron meter) 2.1-2.6um D50(average grain size) Less than 4um 90% q/qzh01-94, 5.5 Less than 1um n1% Sieve residue(wet sieve) < 0.2% q/qzh01-94, 5.6 . Package: 40kgs export standard plastic woven bag 40kgs/bag, 450bag/18tons/20'fcl.

Molecular Sieve 4A 3~5mm for air dryer Description: A kind of alkali metal alumino-silicate,in the sodium form of the Type A crystal structure.It could absorb the molecules which critical diameter is not more than 4 angstroms. The selective adsorption performance of water is higher than any other molecules. It is one of the most used molecular sieve varieties in industry. Chemical Molecular Formula: Na2O·Al2O3·2SiO2·4.5H2O. (SiO2 : Al2O3 2). Technical Parameter: Properties Unit Bead Cylinder Diameter mm 1.6-2.5 3.0-5.0 1.6 3.2 mesh/inch 8*12 4*8 1/16 1/8 Bulk density g/ml 0.7±0.02 0.70±0.02 0.68±0.02 0.68±0.02 Crushing strength N/pce 35.0 80.0 30.0 80.0 Size ratio up to grade wt% 98.0 98.0 96.0 96.0 Static H2O adsorption wt% 21.5 21.5 21.5 21.5 Static CH3OH adsorption wt% 15.0 15.0 15.0 15.0 Package Moisture wt% 1.5 1.5 1.5 Wear ratio wt% 0.2 0.2 0.40 0.40 Application: Drying and removing of CO2 from natural gas, LPG, air, inert and atmospheric gases, etc. Drying of pharmaceutical packaging, electronic components and perishable objects. Dry air Drying of organic liquids such as refrigerants, LPG, and gasoline. Package: 800kg super sack 55gallon(150kg) steel drum 25kg Carton box/Paper drum

Molecular Sieve 3A/5A/13X/13X-APG/13X-HP/Li-X/CMS Molecular Sieve are so named because there are uniform pores inside the particles of molecular sieves, which can separate molecules of different sizes according to the size of the pores. Zhongci, as a professional production factory for more than 20 years, produces many types of zeolite molecular sieve adsorbents. Some of the more common molecular sieve types include Molecular Sieve 3A, Molecular Sieve 4A, Molecular Sieve 5A, Molecular Sieve 13X, Molecular Sieve 13X-APG, Molecular Sieve 13X-HP, Molecular Sieve Li-X, Carbon Molecular Sieve, Nay Molecular Sieve, XH-7/9 Molecular Sieve etc.

A molecular sieve is a material with tiny, uniform pores that is used to adsorb gases and liquids. Unlike common filters, the molecular sieve operates on a molecular level. It only could adsorb molecules which are small enough to pass through the pores, such as water molecules. Because of this, the molecular sieve is usually used as a desiccant, which can adsorb water up to 22% of its own weight. Molecular sieves often consist of aluminosilicate minerals, clays, zeolites, active carbons, synthetic compounds, etc. that have pores which small molecules can pass through. Usually, a 4 to 8 mesh sieve is ideal for gas phase applications, and a 8 to 12 mesh sieve is perfect for liquid phase applications. The powder forms of the 3A, 4A, 5A and 13X sieves are used in specialized applications. Xiangrun is an experienced molecular sieve manufacturer in China. To ensure our customers could find the product they are looking for, we offer four types of molecular sieves, which are listed below carton packing, drum packing

Molecular sieve 3a, also known as molecular sieve ka, with an aperture of about 3 angstroms, can be used for drying of gases and liquids as well as the dehydration of hydrocarbons. It is also widely used for the complete drying of petrol, cracked gases, ethylene, propylene and natural gases. Sphere Diameter Mm 1.5-1.7 3.0-3.3 1.7-2.5 3.0-5.0 Size ratio up to grade % ¡y98 ¡y98 ¡y96 ¡y96 Bulk density G/ml ¡y0.60 ¡y0.60 ¡y0.64 ¡y0.64 Wear ratio % ¡¨¹0.20 ¡¨¹0.25 ¡¨¹0.10 ¡¨¹0.10 Crushing strength N ¡y45/cm ¡y80/cm ¡y45/p ¡y70/p Static water adsorption % ¡y21 ¡y21 ¡y21 ¡y21 Packing water % ¡¨¹1.0 ¡¨¹1.0 ¡¨¹1.0 ¡¨¹1.0 Our package 150kg sealed steel drum, inner baking paint, Shape: |¦ì595mm¡¨¢860mm, as requirements of consumers

Activated alumina, desiccant, adsorbent, catalyst & carrier, molecular sieve, inert balls, calcined alumina powder, chemical aluminium oxide, etc. Activated alumina, desiccant, adsorbent, catalyst & carrier, molecular sieve, inert balls, calcined alumina powder, chemical aluminium oxide, etc.

1. 3A/4A/5A/13X molecular sieve; 2. PSA/VPSA oxygen enrichment and high performance Lithium molecular sieve; 3. Binderless 5A moelcular sieve for hydrogen purification; 4. JLOX-300, a UOP APG-III molecular sieve for cryogenic air separation, more energy than 13X-APG; 5. Activated alumina. 6. Synthetic zeolite powder: 3A/4A/5A/13X/MSX-takes 50% China market; 7. Activated zeolite powder for polyurethane moisture scavenger; 8. XH series for refrigerant; 9. Molecular sieve for Air Brake System;

5A-Pressure swing adsorption. Air cleaning dehydration and carbon dioxide. 4A-air, gas, alkanes, refrigerant gas and liquid depth and dry. Argon gas making and purification. pharmaceutical packaging, electronic components and metamorphic material static and dry. paint, fuel, as dehydrating agent in the coating. 3A- all kinds of liquid (such as ethanol) dry 2, air dry 3, refrigerant drying 4, natural gas, methane gas is dry 5, unsaturated hydrocarbon and cracking gas, ethylene, acetylene, propylene, butadiene, dry. Note: Molecular sieve before use shall prevent the adsorption of water, gas or liquid, organic otherwise, shall be renewable. 25 kg carton packing or 55 gallon drums

Molecular sieve We supply 3a, 4a, 5a and 13x molecular sieves, which are used for the drying and purification of industrial gases As usual

The molecular sieve 4a, molecular sieve 5a, molecular sieve 13x, activated alumina, silica gel.

Summary Molecular sieve is a kind of cubic crystal aluminosilicate compounds. Molecular sieve has the advantages of uniform porous structure, the diameter of the aperture size uniform, these holes to the adsorption of molecules smaller than the diameter of the cavity to the internal, and the polar molecules and unsaturated molecules has a preferential adsorption capacity, and are better able to different degrees, different saturation degree, molecular size and the boiling point of different molecules are separated, that is "screening" molecular, the so-called molecular sieve. Molecular sieve has the advantages of high adsorption capacity, high thermal stability, and so on, so that the molecular sieve is widely used. Molecular sieve classification 3A molecular sieve Chemical formula:, 1/3Na2O, Al2O3, 2SiO2, 9/2H2O, 2/3K2O Silicon aluminum ratio: SiO2/ Al2O3 = 2 Effective aperture: about 3A Application: mainly used for all kinds of liquids (such as ethanol dry, gas drying, dry methane gas, refrigerant drying, unsaturated hydrocarbon and pyrolysis gas, ethylene, acetylene, propylene, butadiene drying, alcohol and all kinds of solvent dehydration. 4A molecular sieves Chemical formula: Al2O3, 2SiO2, Na2O, 9/2H2O Silicon aluminum ratio: SiO2/ Al2O3 = 2 Effective aperture: about 4A Application: mainly used for natural gas and chemical gas and liquid, refrigerants, pharmaceuticals, electronics and materials and volatile substances dry, purified argon, methane, ethane, propane separation. 5A molecular sieves Chemical formula: 3/4CaO, 1/4Na2O, Al2O3, SiO2 2, 9/2H2O Silicon aluminum ratio: SiO2/ Al2O3 = 2 Effective aperture: about 5A Application: it is mainly used for the separation of the isomers of alkanes, oxygen and nitrogen separation, chemical industry, petroleum and natural gas, ammonia decomposition gas and other industrial gases and liquids. 13X molecular sieve Chemical formula: Al2O3 2.45SiO2 6.OH2O Na2O Application: industrial gas drying and purification, can also be used as a carrier. Purification of raw gas for air separation unit (simultaneous removal of H2O and CO2). Desulfurization of liquid hydrocarbons and natural petroleum gas (removal of hydrogen sulfide and thiol).

Molecular sieve information : Shape:Kernel. Colour:Light brown,light red,light yellow,light gray. Storage:Save in a cool place. Weight:2.5kg. Size:3A,4A,5A,13X. Molecular Sieve 3A Recommended Application 1.Dehydration of refrigerant. 2.Drying of highly polar compounds,such as methanol and ethanol. 3.Drying of unsaturated hydrocarbons (e.g.ethylene, propylene , butadiene). 4.Static,(non-regenerative)dehydration of insulating glass units,whether air filled or gas-filled. 5.Drying of natural gas, if COS Minimization is essential or a minimum co-adsorption of hydrocarbons is required. Molecular Sieve 4A Recommended Application 1.Dehydration of electronic element, pharmaceutical , food,etc. 2.Drying and removing of CO2 form natural gas,LPG,air,insert and atmospheric gases,etc. 3.Removal of hydrocarbons,ammonia and methanol from gas streams (ammonia syn gas treating). 4.Dehydration of refrigerant and air in the air break unit of buses,trucks and locomotives. Molecular Sieve 5A Recommended Application 1.Separation of normal-and iso-paraffins. 2.Production of high purity N2,O2,H2 and insert gases from mixed gas streams . 3.Remove water,CO2,H2S from sour natural gas streams , while decreasing COS formation. Molecular Sieve 13x Recommended Application 1.Separation of enriched oxygen from air. 2.Production of medical or bulk oxygen in PSA units. 3.Removal of co2 and moisture from air (air pre-purification)and other gases. 4.Catalyst protection , removal of oxygenates from hydrocarbons(olefin streams) 5.Removal of mercaptans and hydrogen sulphide from hydrocarbon liquid streams such as LPG, butane, propane etc.

Ningxia huiheng activated carbon sales co. Ltd., , specificationof zeolite molecular sieve 3a 4a 13x for adsorption, , 1, has a very high, deep dry separating degree;, produced during the 2, can effectively avoid the separation of adsorption phenomenon, improve the product yield;, 3, can be done in the same system at the same time drying and purification of materials;, 4, under the condition of high temperature, also has certain adsorption capacity;, 5, molecular sieve system than other dry and separation devices, low equipment investment, operation cost is low.Current molecular sieves in chemical industry, electronics, petrochemical, natural gas and other widely used in industry., ningxia huiheng activated carbon sales co. Ltd.Welcome customer purchase.

----------- ZEOLITE SPECIFICATION------------ Item Limits Test Method Ignition loss(800íµ,1h) 20í+1% Q/QZH01-94,5.4 C.E.C Ca Ion exchangecapacity 320í+10mgCaCO3/g QB 1768-93 mgCaCO3(dry) White grade(w=y) 97í+0.5% GB/T13176.1 Grain Size(Micron meter) 2.1-2.6um D50(Average grain size) Less than 4um í¦90% Q/QZH01-94,5.5 Less than 1um í_1% Sieve residue(wet sieve) < 0.2% Q/QZH01-94,5.6. Grain Size(Micron meter) 2.1-2.6um.

Zeolite specification Item Limits Test Method Ignition loss(800íµ, 1h) 20ía1% q/qzh01-94, 5.4 C.E.C ca ion exchange capacity 320ía10mgcaco3/g qb 1768-93 Mgcaco3(dry) White grade(w=y) 97ía0.5% gb/t13176.1 Grain size(micron meter) 2.1-2.6um D50(average grain size) Less than 4um í²90% q/qzh01-94, 5.5 Less than 1um ín1% Sieve residue(wet sieve) < 0.2% q/qzh01-94, 5.6 Packing:40kgs/bag,450bag/20"FCL,18MT/20"FCL

4a zeolite, detergent powder, molecular sieves powder 4A, soap powder.