Find Verified 4 5Mm Cortical Screw Self Tapping Suppliers, Manufacturers and Wholesalers

Solid brass with chrome plated one half has m6 304ss pin length 40mm with tapered end 22mm exposed balance inside hinge Other halve has hole for m6 pin, screw holes to be chamfered 4 screws mild steel m6 hex x 8mm long posi drive per hinge (anti vibration screws) Weight :90gms include ss pins

1. Hand Rail Bracket 2. SS304, SS316 3. Satin Finish, Mirror Polished 4. Two caps plates with Nylon spacer-Diameter of the cap plates in 38mm,including one curve plate(suitable for 50.8mm) and one flat plate, with suitable counter sunk screws.

1> Feature : Adjustable 2> 90° wall mount hinge , 180° glass to glass 3> Glass thickness : 8 mm~12 mm 4> Max door weight : 36 kg (with 2 hinges) 5> Material : Solid Brass 6> Some models do have auto self-closing function within 25° at both sides 7> Mickey Mouse ear design.

1. self adhesive paper (roll & sheet form) 2. printed & blank labels (roll & sheet form) 3. hologram sticker (roll & sheet form) 4. holographic stamping labels & alike products..

Stainless steel screws grade 304,316,202,204 phillips head,csk,pan phillips

Phosphate Self-Tapping and anti-corrosion screws are used for drywall fastening. They are used to fix plasterboards to light gauge steel framings of up to 0.7mm in thickness. The length of screw used should allow for a nominal 10mm penetration into metal framing. Advantages: Partition System Lining System Ceiling System

Hardened sheet metal screws

Fasteners with a tapered shank (self-tapping screws) chipboard screw & particle board screw Similar to a drywall screw except that it has a thinner shank and provides better resistance to pull-out in particle board, while offset against a lower shear strength. The threads on particle board screws are asymmetrical. concrete screw& Tapcons & masonry screw & confast screw & blue screw & self-tapping screw & Titen A stainless or carbon steel screw for fastening wood, metal, or other materials into concrete or masonry. Concrete screws are commonly blue in color, with or without corrosion coating. They may either have a Phillips flat head or a slotted hex washer head. Heads sizes range from 0.1875 to 0.375 in (4.763 to 9.525 mm) and lengths from 1.25 to 5 in (32 to 127 mm). Typically an installer uses a hammer drill to make a pilot hole for each concrete screw. deck screw Similar to drywall screw except that it has improved corrosion resistance and is generally supplied in a larger gauge. Most deck screws have a type-17 (auger type) thread cutting tip for installation into decking materials. They have bugle heads that allows the screw to depress the wood surface without breaking it. double ended screw & dowel screw & hanger bolt Similar to a wood screw but with two pointed ends and no head, used for making hidden joints between two pieces of wood. A hanger bolt has wood screw threads on one end and machine threads on the other. A hanger bolt is used when it is necessary to fasten a metal part to a wood surface. drive screw & hammer drive screw Chiefly used for attaching manufacturers data plates to equipment. Smooth round or mushroom headed with a multi-start thread on the shank, beneath which is reduced diameter shank that acts as a pilot. The screw is fastened by hitting the head with a hammer and is not intended for removal drywall screw Specialized screw with a bugle head that is designed to attach drywall to wood or metal studs, however it is a versatile construction fastener with many uses. The diameter of drywall screw threads is larger than the grip diameter. eye screw & screw eye & vine eye Screw with a looped head. Larger ones are sometimes called lag eye screws. Designed to be used as attachment point, particularly for something that is hung from it. A vine eye (in the UK at least) is similar to a screw eye, except that it has a proportionally longer shank and smaller looped head. As the term suggests vine eyes are often used for attaching wire lines across the surface of buildings so that climbing plants can attach themselves.

Self tapping screw Material:Carbon steel C1022 Diameter:3.5-6.3mm Length:13-150mm Finished:Tempered Phosphate:black, gray Galvanized:bluewhite,white,yellow Slot:Phillips Headï¼?pan head,CSK head,modified truss head,pan framing head, hexagon hea Point: Sharp

Self-tapping screws have a wide range of tip and thread patterns, and are available with almost any possible screw head design. Common features are the screw thread covering the whole length of the screw from tip to head and a pronounced thread hard enough for the intended substrate, often case-hardened.

Material Carbon Steel Drive System :External Hex Item Dimensions: all dimensions available Exterior Finish Zinc Thread Size: all sizes

our company mainly produces various series of drywall screw, chipboard screw, self-tapping screw, machine screw, all kinds of non-standard goods. Products are exported to Japan, Colombia, France,Brazil Korea,Germany and other Europe and Americ, and praised by the majority of customers!

A self-tapping screw is a screw that can tap its own hole as it is driven into the material. Self-tapping screws come with a sharp, piercing tip or a flat, blunt tip. More narrowly, self-tapping is used only to describe a specific type of thread-cutting screw intended to produce a thread in relatively soft material or sheet materials, excluding wood screws. The sharp-tipped screws are designed for drilling their own hole into softer materials such as wood and plastic so they don't need a pilot hole. Other specific types of self-tapping screws include self-drilling screws and thread rolling screws. The advantage of the flat-tipped screw is that it won't get stuck in the material and break off.

self tapping screw

Various types of Self-tapping screws

Drive: phillips, slotted, Headstyles: Binder, Fillister, Flat, Oval, Pan, Round Materials: Steel Grade: C-1022, C-1035,etc. Finishes: Black, zinc, yellow zinc, black zinc, gray zinc M2.5-M20 in diameter; 6mm-220mm in length