Find Verified 316L Ss Bright Finish Round Bar Suppliers, Manufacturers and Wholesalers

Product Details: Thickness/Diameter 2-3 inch, >4 inch, 3-4 inch, 1-2 inch, 3 meter, 0-1 inch Finish Customised, Polished Shape Corrosion Resistant, Round Condition Pharmaceuticals Is It Anodized Anodised Customisation New Is It Corrosion Resistant Anodized Application Construction, Automobiles, Manufacturing Is It Anodised Unpolished Minimum Order Quantity 250 Kilogram Brand Cromonimet Steel Ltd, Imported Payment Terms 100% Advance Against Proforma Invoice. Sorry no credits Third Party Inspection (TPI) Allowed. Charges to be borne by buyer. Test Certificate NABL Government approved laboratory reports can be provided. Grade 316L, AISI 316L, SAE 316, Stainless Steel 316L, Austentic 316L Stainless Steel, SS 316L, SS316L Size 1-10 mm, 10-20 mm, 20-30 mm, 30-40 mm, >40 mm Unit Length 3 m / 6 m Material Stainless Steel We can offer 316L, AISI 316L, SAE 316L, Stainless Steel 316L Round Bar & Rods, 316L round bars, Stainless steel 316L rods, Stainless steel 316L Flat bar, 316Lstainless steel square bar, 316L rectangular bar, 316L rolled bar, 316L forged bar, 316L machined rod. Grade 316L represents the optimum in machinability among the austenitic stainless steels. It is primarily used when production involves extensive machining in automatic screw machines. Machinability Rating (compared to B1212) is approximately 78%. Client can procure smaller quantities of Stainless 316L steel Bar & Rod online ready stock from us at premium prices in any destination by just sending us an email. If any requirements for 316L, AISI 316L, SAE 316L, Stainless Steel 316L Round Bar & Rods, 316L round bars, Stainless steel 316L rods, Stainless steel 316L Flat bar, 316Lstainless steel square bar, 316L rectangular bar, 316L rolled bar, 316L forged bar, 316L machined rod kindly do contact us.

Product Details: Unit Length 3 m, 6 m Material Grade 316,316L Thickness/Diameter 2-3 inch, 3-4 inch, 1-2 inch, 0-1 inch Brand Cromonimet,Steel,Ltd Single Piece Length 3 meter Hardness Soft Surface Finishing Smooth Technique Cold,Rolled Anodised Yes Tolerance As,per,H9,&,H11 Payment Terms After,discussion Third Party Inspection Tpi YES Test Certificate Provided Pipe Fluid Water, Gas, Steam Size >40 mm,1-10 mm,10-20 mm,20-30 mm,30-40 mm,50 mm Material Stainless,Steel Application pharmaceuticals Condition New Features: Easy to use Less maintenance Precise engineering Applications: Ball Valves, Needle Valves, Filter Valves, Connectors, Couplings, Plugs, Hose Ends, Manifolds, Nuts, Bolts

* 316L Stainless steel round bar is commonly used in pulp and paper making equipment, heat exchanger, dyeing equipment, film processing equipment, pipes, materials used for the exterior of buildings in coastal areas, as well as watch chains and case of advanced watches. Standard : JIS, AISI, ASTM, GB, DIN, EN, BS ETC. Material : 316L Specifications : Round bar Diameter : 0.1~500mm Hexagonal bar : Size: 2mm~100mm Flat bar : Thickness : 0.3~200mm Width : 1~2500mm Square bar : Size: 1mm*1mm~800mm*800mm Length : 2m, 5.8m, 6m, or as required. Surface : Black, peeled, polishing, bright, sand blast, hair line, etc. Price Term : Ex-work, FOB, CFR, CIF, etc. Export to : Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc. Delivery Time : Standard size is in stock,prompt delivery or as order's quantity. Package : Export standard package, bundled or be required. The inner size of container is below: * 20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM * 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM * 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM Use of stainless steel round bar: 1. It is used to manufacture self tapping screws such as bolts and nuts; 2. Used for manufacturing rivets; 3. Used for making spring steel wire and transmission mechanism parts; 4. It can be used for filling and strengthening in welding materials; 5. Main parts and components that can be used to manufacture molded articles; 6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe. 7. It is widely used in petroleum, chemical, food and other industries 8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc. 9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells 10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints 11. Widely used in hardware products factories and machinery manufacturers 12. Widely used in various vehicle parts 13. Wide application and furniture decoration industry 14. Widely used in various mechanical equipment 15. Widely used in various pipelines 16. Widely used in various construction machinery 17. Applied to household appliances 18. Applied to electronic communication equipment

We hold immense expertise in making available Copper in many forms including LME registered and non registered cathodes, billets, rods, cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire, insulated wire, mesh and “evaporation slugs”. Copper is one of the most important metals. Copper is reddish with a bright metallic lustre. It is malleable, ductile, and a good conductor of heat and electricity (second only to silver in electrical conductivity). Its alloys, brass and bronze, are very important. Monel and gun metals also contain copper. The most important compounds are the oxide and the sulphate, (blue vitriol

Product Details: Usage/Application Manufacturing Single Piece Length 6 meter, 3 meter Thickness/Diameter 0-1 inch, 3-4 inch, >4 inch, 1-2 inch, 2-3 inch Finish Polished Shape Square, HEX, Round Condition New Customisation Customised Material 304, 304L, 316, 316L Cold Draw Bright Bar available Is It Anodised Anodised Product Details: Minimum Order Quantity 200 Kilogram Thickness/Diameter 0-1 inch, 1-2 inch, 2-3 inch, 3-4 inch Application Manufacturing, Construction Single Piece Length 3 meter, 6 meter We Cromonimet Steel Ltd is one of the leading manufacturers, suppliers and exporter of 316L Stainless Steel Hex bar.These are made up of premium evaluation basic stuff that is sourced from known and trusted vendorâ??s. Our offered hex bars are resistance to corrosion, and has enduring solidness. These hex bars are accessible in diverse stipulations and might be tweaked according to the necessities.Feature: Highly safe Long service life Strongly built Specifications: Standard: AISI, ASTM, JIS, GB,BS Grade: 201, 202, 301, 302, 303, 304, 304L, 310, 316, 316L, 321, 410, 430, 2520 etc Diameter: 10 mm-100 mm Dimensions: 12-250 mm Length: 6m, 4m or as your requirement

Product Stainless Steel coil Surface Finish 2B, BA, NO.1, NO.4, 8K, HL, Embossing, Satin, Mirror, ect Technique Cold Rolled, Hot Rolled Steel Grade 200 series: 201 202 300 series: 301 304 304L 309 310 310s 316 316L 321 400 series: 409 410 410S 420 430 439 443 Duplex:3RE60(Cr18) SAF2304 (Cr23) SAF2205 (Cr22) SAF2507(Cr25) Color Golden, Black, Sapphire Blue, Brown, Rose Gold, Bronze, Silver, ect Processing Type Cutting, bending,stamping,welding,cnc machining Cutting Type Laser cutting;water-jet cutting;flame cutting Application Interior Exterior decoration, Architectur; Evevator; Kitchen, Ceiling, Cabinet, Advertising nameplate, Roof structure, Lead Time 7-15 working days

Product Stainless Steel coil Surface Finish 2B, BA, NO.1, NO.4, 8K, HL, Embossing, Satin, Mirror, ect Technique Cold Rolled, Hot Rolled Steel Grade 200 series: 201 202 300 series: 301 304 304L 309 310 310s 316 316L 321 400 series: 409 410 410S 420 430 439 443 Duplex:3RE60(Cr18) SAF2304 (Cr23) SAF2205 (Cr22) SAF2507(Cr25) Color Golden, Black, Sapphire Blue, Brown, Rose Gold, Bronze, Silver, ect Processing Type Cutting, bending,stamping,welding,cnc machining Cutting Type Laser cutting;water-jet cutting;flame cutting Application Interior Exterior decoration, Architectur; Evevator; Kitchen, Ceiling, Cabinet, Advertising nameplate, Roof structure, Lead Time 7-15 working days

Product Details: Single Piece Length 3 meter, 6 meter Thickness/Diameter 2-3 inch, 3-4 inch, >4 inch, 1-2 inch, 0-1 inch Condition New Corrosion Resistant Yes Application Construction Finish smooth Hardness soft Is It Anodised Anodised Minimum Order Quantity 500 Kilogram Application Manufacturing, Construction Single Piece Length 3 meter, 6 meter Thickness/Diameter 0-1 inch, 1-2 inch, 2-3 inch Brand Cromonimet Steel Ltd SS Bright Round Bar.Specifications: Condition cold drawn & polished cold drawn, centreless ground & polished cold drawn, centrelessGround & polished (strain hardened) Grades 202, 303, 304, 304l, 310, 316, 316l, 32, 410, 420, 416, 430, 431, 430f & others 304, 304l, 316, 316l Diameter (size) 2 mm to 5mm (1/8" to 3/16") 6mm to 22m (1/4" to 7/8") 10mm to 40mm (3/8" to 1-1/2") Diameter tolerance h9 (din 671),h11 h9 (din 671) h9 (din 671),h11 astm a 484 astm a 484 astm a 484 Length 3/4/5. 6/6 meter 3/4/5. 6/6 meter 3/4/5. 6/6 meter (12/14ft/20feet) (12/14ft/20feet) (12/14ft/20feet) Length tolerance -0/+200mm or -0/+200mm or -0/+200mm +100mm or +50mm +100mm or +50mm (-0 /+1 feet) (-0 /+1 feet or +4 or 2 ) (-0 /+1 feet or +4 or 2 )

Explore the strength and lightweight characteristics of our 6063-T6 aluminum billets, tailored for aerospace applications. With a perfect balance of strength and malleability, these billets provide the foundation for manufacturing components that demand high-performance and reliability in the aerospace industry.

Stainless Steel Strip The properties of stainless steel are corrosion resistance, high ductility, attractive appearance and low maintenance. Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface. Stainless steel products are safe for long-term use with excellent resistance of corrosion fatigue. Other specifications are also available up to request Hot Rolled Strip Available Size Width: 16.0~609.6 mm Thickness: 2.5~10.0 mm Available Steel Grade: 304, 304L, 316L Surface Finish: No.1 Cold Rolled Strip Available Size Width: 4.0~609.6 mm Thickness: 0.1~3.0 mm Available Steel Grade: 201, 202, 204 Cu3, 301, 304, 304L, 310S, 316L, 321, 409L, 410S, 420J2, 430, 439, 441, 444, 445 Surface Finish: 2B, 2D, BA, No.3, No.4, No.5, SB, HL

We are suppliers and exporters of Inconel alloy Rod, Pipes, Tubes, Plate, Fitting, Flanges, Flat etc in the grade Inconel 600, 601, 625, 718, Incoloy 800, 801, 825 etc.

Product Details: Condition New Application Fabrication,Pharmaceuticals Thickness/Diameter 0-1 inch, >4 inch, 2-3 inch, 3-4 inch, 1-2 inch Shape As per customer shape & size Surface Finish smooth Anodised Yes Range 1 mm to 50 mm Finishing smooth & rough depend on thickness Dimensions 500 x 500 x100 Brand Jindal / Outokumpu Is It Anodised Anodised Usage/Application Furnace Surface Finishing CR / HR Single Piece Length 18 meter, 6 meter, 36 meter, 3 meter, >36 meter,kess than 1 mtr cutting also Available shapes: Flats, squares and rounds Tempers: T6, T651, T6511 Specifications: ASTM B211, AMS 4115, AMS 4116, AMS 4117, AMS 4128, AMS-QQ-A-225/8 ASTM B221, AMS4150, AMS 4160, AMS 4161, AMS-QQ-A-200/8 Typical Chemical Composition %Weight %SiFe CuMnMgCrZnTi Each Total Minimum 0.40 0.15 0.80 0.04 Maximum 0.80 0.70 0.40 0.15 1.20 0.35 0.25 0.15 0.05 0.15 Remainder Aluminum Typical Mechanical PropertiesTemper Tensile Hardness Ultimate Yield Elongation Brinell KSI MPA KSI MPA % T6, T651 45 310 21 145 25 65 SHOP 6061 ALUMINUM BAR STOCK

Material * ASTM(1005,1006,1008,1010,1015,1020,1025,1030,1035,1040,1045,1050,1055,1060,1065,1070,1080,1084,1016,1022) * DIN(Ck10,Ck15,Ck22,Ck25,Ck30,Ck35,Ck40,Ck45,Ck50, 30Mn4,40Mn4) * BS(040A04,095M15,045M10,080A40,045M10,080M50) * Thickness : 0.1mm-300mm or as required * Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. * Technique : Hot rolled,cold rolled Surface Treatment * Clean, blasting and painting according to customer requirement Thickness tolerance + 0.1mm * Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. * Shipment time : Within 7-15 workdays after receiving deposit or L/C Export packing : Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity : 250,000 tons/year * Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

Standard : JIS, AISI, ASTM, GB, DIN, EN, BS ETC. Material 201 301304L 309S 316L310S321410 4302205 2507 904L INCOLOY Alloy HASTELLOY MONEL etc Specifications Round bar Diameter : 0.1~500mm Hexagonal bar Size : 2mm~100mm Flat bar Thickness : 0.3~200mm Width : 1~2500mm Square bar Size : 1mm*1mm~800mm*800mm Length : 2m, 5.8m, 6m, or as required. Surface : Black, peeled, polishing, bright, sand blast, hair line, etc. Price Term : Ex-work, FOB, CFR, CIF, etc. Export to : Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc. Delivery Time : Standard size is in stock,prompt delivery or as order's quantity. Package : Export standard package, bundled or be required. The inner size of container is below: * 20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM * 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM * 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM Use of stainless steel round bar: 1. It is used to manufacture self tapping screws such as bolts and nuts; 2. Used for manufacturing rivets; 3. Used for making spring steel wire and transmission mechanism parts; 4. It can be used for filling and strengthening in welding materials; 5. Main parts and components that can be used to manufacture molded articles; 6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe. 7. It is widely used in petroleum, chemical, food and other industries 8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc. 9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells 10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints 11. Widely used in hardware products factories and machinery manufacturers 12. Widely used in various vehicle parts 13. Wide application and furniture decoration industry 14. Widely used in various mechanical equipment 15. Widely used in various pipelines 16. Widely used in various construction machinery 17. Applied to household appliances 18. Applied to electronic communication equipment

* Ordinary low alloy steel is a kind of ordinary alloy steel containing a small amount of alloy elements (in most cases, the total amount of w does not exceed 3%). This kind of steel has high strength, good comprehensive properties, corrosion resistance, wear resistance, low temperature resistance, and good cutting and welding properties. * Under the condition of saving a lot of rare alloy elements (such as nickel and chromium), usually 1 t ordinary low alloy steel can be used for 1.2-1.3 carbon steel, and its service life and scope of use are much longer than carbon steel. Ordinary low alloy steel can be smelted in open hearth furnace and converter with general smelting method, and the cost is close to that of carbon steel. Material : API5L Thickness : 0.1mm-300mm or as required Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique : Hot rolled,cold rolled Surface Treatment : Clean, blasting and painting according to customer requirement Thickness tolerance : �±0.1mm Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time : Within 7-15 workdays after receiving deposit or L/C Export packing : Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity : 250,000 tons/year * Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts.

192 is the steel of carbon structural steel, which is a kind of alloy steel and carbon steel. The carbon content is about 0.05%~0.70%, and some can reach up to 0.90%. It can be divided into ordinary carbon structural steel and high-quality carbon structural steel. Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs. Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction. Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed. Material A192 Thickness 0.1mm-300mm or as required Standard AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique Hot rolled,cold rolled Surface Treatment Clean, blasting and painting according to customer requirement Thickness tolerance �±0.1mm Application It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time Within 7-15 workdays after receiving deposit or L/C Export packing Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity 250,000 tons/year Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts. Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

Performance and application of material ST37: the material has good performance, that is, through cold rolling, it can obtain cold rolled strip and steel plate with thinner thickness and higher precision, with high straightness, high surface finish, clean and bright surface of cold rolled plate in Taiwan Strait, easy to be coated, various varieties, wide application, high stamping performance, non aging, and low yield point. Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs. Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction. Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed. Material ST37 Thickness 0.1mm-300mm or as required Standard AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique Hot rolled,cold rolled Surface Treatment Clean, blasting and painting according to customer requirement Thickness tolerance �±0.1mm Application It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time Within 7-15 workdays after receiving deposit or L/C Export packing Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity 250,000 tons/year Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts.

Product Details: Material Grade : Super Duplex DIN 1.4462 Round Bars Single Piece Length 6 meter, 3 meter Thickness/Diameter : 2-3 inch, 1-2 inch, 3-4 inch, >4 inch, 0-1 inch Shape : Round Grade : Super Duplex DIN 1.4462 Round Bars Packing Type : Loose / wooden Pilot packing Surface Treatment : Black or Export Broght Diameter 10 mm to 100 mm Weight : depends upon length & size Finishing : Smooth Bright finish Steel Grade : Super Duplex DIN 1.4462 Round Bars Surface Finish : Cold Rolled Tolerance : H7,H11 Customisation Customised Color : Export Bright Material : Nickel Alloy Condition : New Super Duplex DIN 1.4462 Round BarsProduct Details: Thickness/Diameter : 0-1 inch Material Grade : Duplex and Super Duplex rods Application : Manufacturing Single Piece Length 3 meter