GRIPHOLD® make, Heavy Duty, Hex Adapter (Allen Key Socket), in 3/8 Sq. Drive, made from chrome vanadium steel (EN-47) with rust resistant black industrial finish. GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications. They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications. They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out. The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis. The tempering process is given special attention. Design and Hardness are strictly followed as per IS-Standards for Industrial Tools. Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards. Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers. The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Hex Adapter (Allen Key Socket), in 1/2 Sq. Drive, made from chrome vanadium steel (EN-47) with rust resistant black industrial finish. GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications. They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications. They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out. The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis. The tempering process is given special attention. Design and Hardness are strictly followed as per IS-Standards for Industrial Tools. Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards. Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers. The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
We have range of patch fittings suitable for 8-15mm tempered glass doors. 1. Our patch fittings are suitable for 10mm, 12mm tempered glass doors 2. Bottom Patch fitting. 3. Top patch fitting. 4. Side Over panel. 5. Top center 6. Inserts available for most of the floor springs. 7. Aluminum, SS304. 8. Polished Stainless steel, Satin Stainless steel,aluminium oxsilver ,Aluminum Gold color.
1> Feature : Adjustable 2> 90° wall mount hinge , 180° glass to glass 3> Glass thickness : 8 mm~12 mm 4> Max door weight : 36 kg (with 2 hinges) 5> Material : Solid Brass 6> Some models do have auto self-closing function within 25° at both sides 7> Mickey Mouse ear design.
1> Back To Back Towel Bars(with and without metal washers) 2> Pull handled available in various sizes with back to back Towel bars 3> Glass thickness : 6 mm~12 mm 4> Size: 19 x 6"/8"/10/12"/18"/24" C/C 5> Material :304 Stainless Steel / #62 Brass Tubular 6> Chrome plated, Brushed Nickel, Brass Polished, Polished Chrome, Gold Plated, Oil Rubbed Bronze.
1. Available in various shapes and designs 2. Glass thickness : 8 mm~10 mm 3. Size: 45mm x 45mm x 3.2mm, 50mmx50x5.0mm, 50mmx50x3.5mm 4. Material : Solid Brass 5. Glass to Glass, wall to Glass shower brackets 6. Angles 90°, 135°,180°degree. 7. Chrome plated, Brushed Nickel, Brass Polished, Polished Chrome, Gold Plated, Oil Rubbed Bronze.
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Name : Weed control mat/Ground cover/ 1. Weight 2oz/sm - 14oz/sm or 60gsm-150gsm 2. Width 1.6' -20' or 0.5m-6m 3. Roll Length 16', 33', 65', or 5m,10m,20m,25m,50m,100m or as required 4. Color Black,Green,Black-green or as required 5. Weave 8*8,10*10,11*11,12*12,12*16 6. Material 100% PP material 7. UV resistance 3-5 years 8. Sample Avaliable 9. Delivery time About 20 days 10. Min order No limit 11.Terms of payment 1.TT or LC 12. Supply capacity 500 tons per month 13. Packing In rolls with paper core inside and polybag outside or in Carton or as your request 14. Quantity 1x20ft container can load about 11 tons 1x40'HC can load about 26 tons 15.Export market Australia,Canada,Argentina,USA,The Middle East,Europe market ,Japan and so on.
1. Available in different models 2. CNC machined precision pivot pins 3. Glass to Glass, wall to Glass shower door bi-fold hinges. 4. Glass thickness: 6 mm~10 mm 5. Max door weight: 23 kg (with 2 hinges) 6. Feature: 14mm Diameter hole required (non cutout),free swinging 7. Material: SS304 8. Closing angles 180°degree. 9. Straight edges, beveled edges, round edges. 10. Glass preparation- 14mm Diameter hole required. 11. Chrome plated, Brushed Nickel, Gold Plated, Oil Rubbed Bronze.
Indian Granite: We can supply Premium Grade to commercial grade. Size and surface and sides finishes can be customized. Finishes: Mirror, Matte, Flame finish etc. Slabs: Length- 6’ to 9’, width: 2’ to 3’, thickness:18mm (+/-1) Tiles: 45x45cm, 60x45,x60x60cm in 10mm. Any other sizes can be customize. Edge finish as per your requirement. Surface finish: we have automated polishing and Semi Automated polishing. 1. Indian Granite-Black 2. Indian Granite-Black Galaxy 3. Indian Granite-Black Pear 4. Indian Granite-Coffee Brown 5. Indian Granite-Coral Gold 6. Indian Granite-Jasemine White 7. Indian Granite-River White 8. Indian Granite-Sappahire Blue 9. Indian Granite-Silver Waves 10. Indian Granite-Steel Grey 11. Indian Granite-Tan Brown 12. Indian Viscon White 13. Indian Granit-Aspen White
Indian Granites: Indian Granite: We can supply Premium Grade to commercial grade. Size and surface and sides finishes can be customized. Finishes: Mirror, Matte, Flame finish etc. Slabs: Length- 6’ to 9’, width: 2’ to 3’, thickness:18mm (+/-1) Tiles: 45x45cm, 60x45,x60x60cm in 10mm. Any other sizes can be customize. Edge finish as per your requirement. Surface finish: we have automated polishing and Semi Automated polishing. 1. Indian Granite-Black 2. Indian Granite-Black Galaxy 3. Indian Granite-Black Pear 4. Indian Granite-Coffee Brown 5. Indian Granite-Coral Gold 6. Indian Granite-Jasemine White 7. Indian Granite-River White 8. Indian Granite-Sappahire Blue 9. Indian Granite-Silver Waves 10. Indian Granite-Steel Grey 11. Indian Granite-Tan Brown 12. Indian Viscon White 13. Indian Granit-Aspen White
1.We use imported base paper from Germany. For solid color, base paper most 80 to 120GSM. For wood base paper is between 70-85 gsm 2. High quality water-base ink- Available over 200 shades in Solid colors and wood grains 3. With clear texture ,high Fidelity meeting international standards. 4. With smooth surface coating 5. Germproof, mould proof, antistatic and wear-resistance. 6. Green environmental protection and Odorlessness which Conforms to the GB18584-2001 standard requirement 7. Can be used for the hot press molding craft, the production efficiency is high. 8. Melamine paper takes shape easily, is widely used for the panel furniture and the decorative yarn. Product Specification: Width: 1230-1260mm or 1300-1800mm Length: 500-1000m For storing: Put it in room to a cool and dry place keep the temperature 20-25°C in room. The best humidity is: 50-60% We can also give you complete decorative solution with Matching Melamine Edge Banding, PU Paper. If you need just need Melamine/prelaminated boards either in MDF / Particle board we can also do so
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
GRIPHOLD® make, Heavy Duty, Hex Adapter (Allen Key Socket), in 1/2 Sq. Drive, made from chrome vanadium steel (EN-47) with rust resistant black industrial finish. GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications. They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications. They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out. The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis. The tempering process is given special attention. Design and Hardness are strictly followed as per IS-Standards for Industrial Tools. Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards. Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice amopng general purpose tools manufacturers. The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
3 Roda Mosquito Qoil - The original product from Indonesia. - Can Expel Mosquito and Insect. - Type Available : - 8 Hours Green - 8 Hours Green Refill - 10 Hours Green - 10 Hours Red - 12 Hours Green
1. coco peat (coir pith), coir rugs, 2. textile chemicals, polysols, binders, thickeners and many other industrial chemicals, 3. sugar confectionary products like lollipop etc. 4. eco friendly, sugarcane and paper packaging products like coffee/tea cups, beverage cups all sizes, takeaway lunch boxes, straws, etc. 5. frozen indian snacks like samosa, patties, mix veggies, all kinds of indian snacks and frozen foods. 6. pvd coated sanitary ware like kitchen sinks, basins, railing, taps, and other furniture with elegant polishes of gold, rose gold, black, silver, multi color, champagne colour, etc in different textures. 7. dehydrated vegetable and fruit powders like, dehydrated garlic powder, ginger powder, chickoo powder, etc. 8. onions 9. all kinds of supermarket items .Export and import
1 ) pp woven bags 2 ) pp woven fabric & pp woven rolls 3) bopp woven sack 4) fibc bag / jumbo bag 5 ) block bottom valve bag 6 ) block bottom bag with open mouth 7 ) jute bag 8 ) wheat flour 9 ) wheat flour maida 10 ) organic wheat flour 11) wheat flour type 55 to 65 12) ashirwad wheat flour.
1. ashwagandha extract 1.5% 2. zingiber officinale 2.5% 3. glycine powder 4. black seed oil 5. flax seed oil 6. castor oil (clear) 7. black pepper extract 95% 8. curcumin 95% 9. aloe vera 200x 10.. potassium sorbate 11. propylene glycol.
1. carbon black 2. rubber crumb 3. precipitated silica 4. silica quartz ore purity: 98% available, silica quartz powder/purity: 99.9% available, silica lumps purity: 99% available 5. calcium chloride powder 74% cacl2 92% cacl2 94% 6. magnesium chloride flake 7. sodium meta bisulphite (food grade 94 96%) 8. red onion as per your required size. 9. sodium acetate anhydrous 99% sodium acetate trihydrate crystal 99% 10.pet preform & fiber, bottle, flakes, 11.bopp tapes 12. capsicum or bell pepper, ready to eat foods, ready green paste like ginger, garlic paste.We also do logistic work for cif and we have 3rd party facilities like sgs on client chargeable base.
Mace Botanical: Myristica fragrans Family: N.O. Myristicaceae Hindi Name: Mace - Javitri General Description: Nutmeg, spice consisting of the seed of the Myristica fragrans, a tropical, dioecious evergreen tree native to the Moluccas or Spice Islands of Indonesia. Geographical Sources The nutmeg tree, Myristica fragrans, is indigenous to the Moluccas in Indonesia but has been successfully grown in other Asian countries and in the Caribbean, namely Grenada. Banda Islands, Malayan Archipelago, Molucca Islands, and cultivated in Sumatra, French Guiana Composition -> Nutmeg and mace contain 7 to 14 percent essential oil, the principal components of which are pinene, camphene, and dipentene. Nutmeg on expression yields about 24 to 30 percent fixed oil called nutmeg butter, or oil of mace. Dried kernel of the seed. Varieties -> Whole nutmegs are grouped under three broad quality classifications: 1. Sound: nutmegs which are mainly used for grinding and to a lesser extent for oleoresin extraction. High quality or sound whole nutmegs are traded in grades which refer to their size in numbers of nutmegs per pound: 80s, 110s and 130s (110 to 287 nuts per kg), or 'ABCD' which is an assortment of various sizes. 2. Substandard: nutmegs which are used for grinding, oleoresin extraction and essential oil distillation. Substandard nutmegs are traded as 'sound, shrivelled' which in general have a higher volatile oil content than mature sound nutmegs and are used for grinding, oleoresin extraction and oil distillation; and 'BWP' (broken, wormy and punky) which are mainly used for grinding as volatile oil content generally does not exceed 8%. 3. Distilling: poor quality nutmegs used for essential oil distillation.Distilling grades of nutmegs are of poorer quality: 'BIA' or 'ETEZ' with a volatile oil content of 8% to 10%; and 'BSL' or 'AZWI' which has less shell material and a volatile oil content of 12% to 13%. Method of Processing -> When fully mature it splits in two, exposing a crimson-coloured aril, the mace, surrounding a single shiny, brown seed, the nutmeg. The pulp of the fruit may be eaten locally. After collection, the aril-enveloped nutmegs are conveyed to curing areas where the mace is removed, flattened out, and dried. The nutmegs are dried gradually in the sun and turned twice daily over a period of six to eight weeks. During this time the nutmeg shrinks away from its hard seed coat until the kernels rattle in their shells when shaken. The shell is then broken with a wooden truncheon and the nutmegs are picked out. Dried nutmegs are grayish-brown ovals with furrowed surfaces. Large ones may be about 1.2 inches long and 0.8 inch in diameter. Taste and Aroma: Nutmeg has a characteristic, pleasant fragrance and slightly warm taste
