The FiberHTT HSFP3128-LR SFP28 25G LR Duplex 1310nm 10km transceiver is designed to transmit and receive optical data over single mode optical fiber for link length up to 10km.
The module optical connection is duplex LC and shall be compatible with SFP+ 28Gbps and backward compatible with legacy 10G SFP+ pluggable. The SFP28 LR module is a dual directional device with a transmitter and receiver plus a control management interface (2-wire interface) in the same physical package. 2-wire interface is used for serial ID, digital diagnostics and module control function.
The module operates by a single +3.3V power supply. LVCMOS/LVTTL global control signals, such as Module Present, Reset, Interrupt and Low Power Mode, are available with the modules. The SFP28 LR module electrical interface is compliant to OFI CEI-VSR-28G-VSR. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.
Glsun SFP28-25G-BX10U DFB 25.78Gbps SFP28 BiDi transceiver module is designed for use in 25Gb/s data rate over single-mode fiber for link length 10Km. The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for 25Gb/s single lane optical links.
Compatible Cisco Form Factor SFP28
Max Data Rate 25.78Gbps Wavelength TX1270nm/RX1330nm
Max Cable Distance 10km Connector Simplex LC
Transmitter Type DFB BiDi Extinction Ratio 3.5dB
Media SMF Power Consumption
GLsun SFP28-25G-LR single-mode transceiver is SFP28 transceiver module duplex optical data communications support up to 25.78Gb/s. It is with the SFP+ 20 pins connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. It has built-in clock data recovery (CDR). This module is designed for single-mode fiber and operates at a nominal wavelength of 1310nm.
Compatible Cisco Form Factor SFP28
Max Data Rate 25.78Gbps Wavelength 1310nm
Max Cable Distance 10km on 9/125um SMF Connector Duplex LC
Transmitter Type DFB 1310nm Extinction Ratio 3.5dB
Media SMF Power Consumption
Key Prameter
Speed 10GBase-LR
Wavelength 1310nm
Distance 10km
Interface LC Duplex
DOM Support YES
Media SMF
Optical Componets DFB/PIN
TX Power -8.2~-0.5dBnm
RX Power < -14.4dBm
Form Factor SFP+
Protocols MSA Compliant
Temperature Range 0 to 70 (32 to 158)
125 25G Sfp28 Lr 1310Nm 10Km Transceiver Suppliers
Short on time? Let 25G Sfp28 Lr 1310Nm 10Km Transceiver sellers contact you.
25G SFP28 CWDM 10KM DDM optical transceiver
Item NO.: ES2Cxx2X-3LCD10
Date rate: 25G
Wavelength: 1270-1570nm
Distance: 10KM
Connector: LC
DDM:YES
Place of origin: Made in China
Shipping Port: ShenZhen
Package type: Individual package or 10pc/package
Features
1.Hot-pluggable SFP28 form factor/Full-duplex transceiver modules
2.CWDM DML laser and PIN receiver
3.Compliant with SFP28 MSA, 25G Ethernet and CPRI/eCPRI specifications
4.Data rate up to 25.78Gbps/ Wavelength options: 1270nm-1370nm and 1470nm-1570nm (20nm spacing)
5.Reach up to 10km over SMF/ Power consumption < 2W/ Dual LC receptacles
6.Operating case temperature range from 0°C to 70°C (-40°C to +85°C optional)
7.3.3V power supply voltage/RoHS compliant (lead free)
Applications
1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface
2.Switched backplane applications/Router/Server interface
3.Other optical transmission systems
25G SFP28 optical transceiver module, support 25Gb/s and SR up to 100 m transmission, LR 25G SFP28 up to 10 km transmission, and ER 25G SFP28 up to 40 km transmission, it works in high-speed IDC connection solutions, and so on.
Glsun SFP28-25G-BX10D DFB 25.78Gbps SFP28 BiDi transceiver module is designed for use in 25Gb/s data rate over single-mode fiber for link length 10Km. The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for 25Gb/s single lane optical links.
Compatible Cisco Form Factor SFP28
Max Data Rate 25.78Gbps Wavelength TX1330nm/RX1270nm
Max Cable Distance 10Km Connector Simplex LC
Transmitter Type DFB BiDi Extinction Ratio 3.5dB
Media SMF Power Consumption
10g xenpak transceiver
Description:
Poflink's xenpak is a standardized form factor for 10 gb/s fiber optic transponders that is used for data transfer rates from 10.3 gb/s to 10.5 gb/s. It is protocol-specific: either 10g ethernet or 10g fibre channel versions are available. Xenpak transponders are used in datacom optical links only (not telecom). Its electrical interface to the host board is also standardized and is called xaui (4 x 3.125 gb/s).
Poflink offers the whole series of 10g xenpak, including:
Xenpak 10gbase-sr 300m (mmf om3);
Xenpak 10gbase-lr smf 10-20km;
Xenpak 10gbase-er smf 40km;
Xenpak 10gbase-zr smf 80km
Features:
Hot pluggable x2 msa form factor
Low total power consumption
Rohs-6 compliant (lead-free)
Temperature range 0¡ãc to 70¡ãc
Transmission distance 300m, 10km, 40km, 80 km
Cooled 1550nm eml or uncooled directly modulated distributed feedback (dfb)
Sc connector, single mode fiber
Full duplex transmission mode
Digital optics monitoring (dom)
Power supply: +5.0 v, +3.3 v
Xaui electrical interface 4 x 3.125 gb/s ethernet(ftlx1841e2)
Management and control via mdio 2-wire bus
De-latch mechanism with low extraction force
Application:
Xenpak 10gbase-sr 300m (smf om3);
Xenpak 10gbase-lrm mmf 220m;
Xenpak 10gbase-lr smf 10-20km;
Xenpak 10gbase-er smf 40km;
Xenpak 10gbase-zr smf 80km
25G SR,LR SFP28 optical transceiver with the features of IEEE802.3by, SFF-8472 low consumption and high reliability,suitable for data center,25G Ethernet and fiber channel.
25G SFP28 850nm 300M SR with DDM Transceiver
Item NO.:ESP852A-3LCD03
Date rate: 25G
Wavelength:850nm
Distance:300M
Connector:LC
First:MM
DDM:YES
Place of origin: Made in China
Shipping Port: ShenZhen
Package type: Individual package or 10pc/package
Features
Supports 25Gbps data rateï¼?70m on OM3 MMF and 100m on OM4 MMFï¼?
850nm VCSEL laser and PIN photo-detectorï¼?
Inter CDR on both Transmitter and Receiver channelï¼?
Duplex LC receptacleï¼?Single 3.3V power supplyï¼?Power dissipation < 1Wï¼?
DDMÂ functions are available via the I2C interfaceï¼?RoHS-6 compliantï¼?
Commercial case temperature range: 0°C to 70°C.
Applications
1.Gigabit Ethernet 2.Fiber Channel 3.Switch to Switch interface
4.Switched backplane applications 5.Router/Server interface
6.Other optical transmission systems
Data rate:10G
Wavelength:1310nm
Distance:10KM
Interface:LC
Fiber:SM
Place of origin:Made in China
Port:Shenzhen
Working temperature: Commercial:0°C to +70°C;Industrial:-40°C to +85°C
Optical module used in Ethernet, SDH, Sonet,Can be compatible with CISCO 2900 Series,CISCO 4000 Series, CISCO 5000 Series,HUAWEI, the pole into, D-Link, ZTE, HP, juniper and other equipment.
Our products require strict testing standards,standard packing form,to provide customers with quality service and timely delivery cycle.
Function:Photoelectric conversion module
Scope of application: switch, Ethernet, data center, SDH, SONET, ATM
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
1310nmDFBtransmitter, PIN photo-detector
SMF links up to10km
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface
Power Supply :+3.3V
Power consumption
Features
Up to 11.3Gb/s data links
1310nm DFB transmitter and PIN receiver
with CDR supported 9.95 to 11.3Gb/s reference-free
Up to 10km on 9/125µm SMF
Hot-pluggable SFP+ footprint
Duplex LC/UPC type pluggable optical interface
Metal enclosure, for lower EMI
RoHS compliant and lead-free
Support Digital Diagnostic Monitoring interface
Single +3.3V power supply
Maximum power consumption 1.5W
Compliant with SFF+MSA and SFF8472
Case operating temperature
Commercial: 0 ~ +70oC
Extended: -10 ~ +80oC
Industrial: -40 ~ +85oC
Applications
10GBASE-LR/LW & 10G Ethernet
SDH STM64
Other Optical Links
Features
- Compliant with SFF-8431 SFP+ MSA
- Compliant with IEEE802.3ae 10G BASE-LW/LR
- 1310nm DFB transmitter
- PIN photo-detector
- 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers
- All-metal housing for superior EMI performance
- Low power consumption
- Advanced firmware allow customer system encryption information to be stored in transceiver
- Cost effective SFP+ solution, enables higher port densities and greater bandwidth
- RoHS Compliant
Applications
- High-speed storage area networks
- Computer cluster cross-connect
- Custom high-speed data pipes
GLSUN SFP-25G-CWDM-1270-10-T02, CWDM 25.78Gbps SFP28 transceiver is designed for use in 25Gb/s data rate over single-mode fiber for link length 10Km.
The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for 25Gb/s single lane optical links.
Compatible Cisco Form Factor SFP28
Max Data Rate 25.78Gb/s Wavelength 1270nm~1370nm
Max Cable Distance 10km Connector Duplex LC
Transmitter Type DFB CWDM Extinction Ratio 3.5dB
Media SMF Power Consumption
GLsun's DWDM-SFP25G-10-C17-T02 single-mode transceiver is SFP28 25G DWDM 10KM transceiver for duplex optical data communications support up to 25.78Gb/s. It is with the SFP+ 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I C. It has built-in clock and data recovery (CDR). This module is designed for single-mode fiber.
Compatible Cisco Form Factor SFP28
Max Data Rate 25.78Gb/s Wavelength 1563.86nm~1528.77nm
Max Cable Distance 10km Connector Duplex LC
Transmitter Type 1563.86nm EML Extinction Ratio 3.5dB
Media SMF Power Consumption
Product Features
4 WDM lanes MUX/DEMUX design
4 WDM channels are 1296, 1300, 1305 and 1309 nm
Hot-pluggable CFP2 footprint
RoHS compliant and Lead Free
Up to 10Km link length
Power dissipation
Quick details
Place of origin:, guangdong, china (mainland)
Brand name:, hdv
Model number:, sfp+-10gb-1310-20km
Data rate:, 10g
Connector:, lc
Distance:, 20km
Wavelength:, 1310nm
Certification:, rohs directive-compliant
Compatible:, cisco, huawei , hp
Warranty:, 3 years
Temperature:, 0 to 70
Packing:, sfp
Type:, sfp
Packing and delivery
Packing details: according to quantity, we can offer 1 by one in box, or 5 pairs in plastic box or 10 pairs and we can do as customer required
Delivery time: shipped in 7 days after payment
10g sfp+ 20km, 1310nm, bidi transceiver module
10g base-lr, sfp+, transceiver, module, for, smf, , 1310-nm, wavelength, , lc, duplex, connector
Ascent optics, 10g base, sfp+, modules, offer, customers, wide, variety, of, 10, gigabit, ethernet, connectivity, options, for, data, center, , enterprise, wiring, closet, and, service, provider, transport, applications
Smallest, 10g, form, factor
Supports, 10g base, ethernet, and, otu2/otu2e
Hot-swappable, input/output, device, that, plugs, into, an, ethernet, sfp+, port, of, switch
Provides, flexibility, of, interface, choice,
Supports, pay-as-you-populate, model
Supports, digital, optical, monitoring, capability
Optical, interoperability, with, 10g base, xenpak, , 10g base, x2, and, 10g base, xfp, interfaces, on, the, same, link
, 2. Main features
, 1.10, 8, 4, 3, 2.5, 1.25g, 155m all rate
, 2.Sfp+, xfp, sfp, sff, csfp are customizable
, 3.Perfectly compatible with famous switch, cisco huawei
, 4.Ddm
, 5.Choice from single mode, muli-mode
, 6.Choice from dual fiber lc, single fiber sc/lc
, 7.Low power consumption and high sensitively
, 8.Programmable of no light alarm function
, 9.Complying rohs directive-compliant standard
, 10.Working temperature
Quick details
Place of origin:, guangdong, china (mainland)
Brand name:, hdv
Model number:, sfp+-10gb-1310-20km
Data rate:, 10g
Connector:, lc
Distance:, 20km
Wavelength:, 1310nm
Certification:, rohs directive-compliant
Compatible:, cisco, huawei , hp
Warranty:, 3 years
Temperature:, 0 to 70
Packing:, sfp
Type:, sfp
Packing and delivery
Packing details: according to quantity, we can offer 1 by one in box, or 5 pairs in plastic box or 10 pairs and we can do as customer required
Delivery time: shipped in 7 days after payment
10g sfp+ 20km, 1310nm, bidi transceiver module
10g base-lr, sfp+, transceiver, module, for, smf, , 1310-nm, wavelength, , lc, duplex, connector
Ascent optics, 10g base, sfp+, modules, offer, customers, wide, variety, of, 10, gigabit, ethernet, connectivity, options, for, data, center, , enterprise, wiring, closet, and, service, provider, transport, applications
Smallest, 10g, form, factor
Supports, 10g base, ethernet, and, otu2/otu2e
Hot-swappable, input/output, device, that, plugs, into, an, ethernet, sfp+, port, of, switch
Provides, flexibility, of, interface, choice,
Supports, pay-as-you-populate, model
Supports, digital, optical, monitoring, capability
Optical, interoperability, with, 10g base, xenpak, , 10g base, x2, and, 10g base, xfp, interfaces, on, the, same, link
, 2. Main features
, 1.10, 8, 4, 3, 2.5, 1.25g, 155m all rate
, 2.Sfp+, xfp, sfp, sff, csfp are customizable
, 3.Perfectly compatible with famous switch, cisco huawei
, 4.Ddm
, 5.Choice from single mode, muli-mode
, 6.Choice from dual fiber lc, single fiber sc/lc
, 7.Low power consumption and high sensitively
, 8.Programmable of no light alarm function
, 9.Complying rohs directive-compliant standard
, 10.Working temperature
125 25G Sfp28 Lr 1310Nm 10Km Transceiver Suppliers
Short on time? Let 25G Sfp28 Lr 1310Nm 10Km Transceiver sellers contact you.
