Find Verified 24X24 Matrix Rack Optical Switch Suppliers, Manufacturers and Wholesalers

Describe XH-FSW-24X24 matrix rack optical switches is a product that uses optical switches to realize optical path conversion. The device provides serial port RS-232 and Ethernet RJ45 interface, through the TCP/IP protocol connection to send commands to control optical path switching, and finally realize 24 (input) Ã?? 24 (output) full-switching non-blocking two-way fiber-optic routing Cross-connect plays an important role in optical communication applications. Optical switches are mainly used in multi-channel optical monitoring in optical transmission systems, automatic switching of LAN multi-light sources/detectors, and optical sensing multi-point dynamic monitoring systems; optical testing systems are used for optical fibers, optical devices, networks and field engineering optical cables Testing; Optical device assembly and adjustment Features (1) Ethernet port, serial port communication interface command control. (2) full switching non-blocking two-way cross connection. (3) Equipped with LC Seiko flange, the insertion loss is small. (4) Small insertion loss, fast switching speed, high signal stability, no crosstalk on adjacent channels parameter Parameter Parameter Values Model XH-FSW-24X24-Q Wavelength Range 1260~1650nm Insertion Loss 1.2 dB Repeatability 0.02 dB Return Loss 50 dB Crosstalk 70 dB WDL 0.25 dB PDL 0.05 dB Fiber Type SM 9/125um Lifetime 107 Switching Time 15ms(Adjacent channel) connector FC\PC control RJ45 RS-232 Operating power AC 100~240V Operating Temperature -10 ~ +60 Storage Temperature -40 ~ +85 Dimension 19 4U 483 X 600 X 178

Description: The matrix optical switch module is a kind of optical path control device, which can be arbitrarily interconnected among multiple groups of input ports and multiple groups of output ports. Due to its advantages such as good environmental performance, it is mainly used in optical communication for cross-connection of backbone optical nodes, multi-dimensional online monitoring, etc. Features: Low insertion loss Fast switching Support half-cross/full-cross customization Support input/output port power monitoring customization High stability and high reliability

1 × N rack-mounted optical switch can be manually selected from front panel or control via RS232 port, Ethernet port. It can be controlled to switch step by step or set scanning automatically in certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.

1 128 rack-mounted optic switch is a kind of functional device,with the ability of controlling and switching optical route. It can be manually selected from front panel or controlled via RS232 port, Ethernet port and auto-scanned on certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system. Features Low insertion loss, Fast switching SerialNet, High Reliability, High Stability LCD display panel. Visual display, Convenient operation Transparent transmission signal. High stability and reliability Channel and time interval of automatic scanning can be set up RS232 Control and RJ45 Ethernet Remote Management Applications FITL Automatic Measurement Optical Network Remote Monitoring Cable Monitoring and Maintaining system Parameters Parameters Unit Indicators Unit Type XH- FSW-1X128 Wavelength Range nm 1250~1700nm Test Wavelength nm 1550nm Insertion Loss dB Typ. 0.8dB,Max. 1.5 dB Repeatability dB 0.02 Return Loss dB 50 Crosstalk dB 70 WDL dB 0.25 PDL dB 0.05 Optical Power mW 500 Switching Time ms 12 ms adjacent channel Fiber Type um 9/125 Connector LC/PC Monitoring Port RJ45 & RS-232 Working Power Supply Plug-type 1 128 rack-mounted optic switch is a kind of functional device,with the ability of controlling and switching optical route. It can be manually selected from front panel or controlled via RS232 port, Ethernet port and auto-scanned on certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system. Features Low insertion loss, Fast switching SerialNet, High Reliability, High Stability LCD display panel. Visual display, Convenient operation Transparent transmission signal. High stability and reliability Channel and time interval of automatic scanning can be set up RS232 Control and RJ45 Ethernet Remote Management Applications FITL Automatic Measurement Optical Network Remote Monitoring Cable Monitoring and Maintaining system Parameters Parameters Unit Indicators Unit Type XH- FSW-1X128 Wavelength Range nm 1250~1700nm Test Wavelength nm 1550nm Insertion Loss dB Typ. 0.8dB,Max. 1.5 dB Repeatability dB 0.02 Return Loss dB 50 Crosstalk dB 70 WDL dB 0.25 PDL dB 0.05 Optical Power mW 500 Switching Time ms 12 ms adjacent channel Fiber Type um 9/125 Connector LC/PC Monitoring Port RJ45 & RS-232 Working Power Supply Plug-type V AC:100 240 (50/60Hz) Power Consumption W 10 Operating Temperature -10 60 Size mm 3U:483 x 230 x 134 AC:100 240 (50/60Hz) Power Consumption W 10 Operating Temperature -10 60 Size mm 3U:483 x 230 x 134

Introduction 2xN rack-mounted optical switch is a kind of functional device,with the ability of controlling and switching optical route. It can be manually selected from front panel or controlled via RS232 port, Ethernet port and auto-scanned on certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system. Features Low Insertion Loss and Fast Switching SerialNet, High Reliability, High Stability LCD Display RS232 Control and Ethernet Remote Management Applications FITL Automatic Measurement Optical Network Remote Monitoring Cable Monitoring and Maintaining system

XH-FSW-8-8 rack-mounted optical switch is a kind of functional device,with the ability of controlling and switching optical route. It can be manually selected from front panel or controlled via RS232 port, Ethernet port and auto-scanned on certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system. Features: Low insertion loss, Fast switching SerialNet, High Reliability, High Stability LED display panel. Visual display, Convenient operation. Transparent transmission signal. High stability and reliability. Channel and time interval of automatic scanning can be set up. RS232 Control and Ethernet Remote Management Applications: FITL Automatic Measurement Optical Network Remote Monitoring Cable Monitoring and Maintaining system Specifications Parameters Unit Indicators Channel No. 8-8 Wavelength Range nm 1260~1650 Test Wavelength nm 1310/1550 Insertion Loss dB 2.5 dB Repeatability dB 0.04 Return Loss dB 50 Crosstalk dB 55 WDL dB 0.50 PDL dB 0.1 Optic Power mW 500 Fiber Type SM 9/125um Connector FC/APC Monitoring Port RJ45 RS-232 Working Power Supply Plug-type V AC:100ï½? 240 (50/60Hz) Power Consumption W 30 Operating Temperature -10 60 Size mm 4U:483 x 500 x 178

Introduction 1xN rack-mounted optical switch is a kind of functional equipment,with the ability of controlling and switching optical route. It can be manually selected from front panel or controlled via RS232 port, Ethernet port and auto-scanned on certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system. Features: Low Insertion Loss and Fast Switching SerialNet, High Reliability, High Stability LCD Display RS232 Control and Ethernet Remote Management Applications: FITL Automatic Measurement Optical Network Remote Monitoring Cable Monitoring and Maintaining system

Glsun 1*2h optical switch - features low insertion loss wide wavelength range low crosstalk high stability, high reliability epoxy-free on optical path latching and non-latching Glsun 1*2h optical switch - applications r&d in laboratory system monitoring oadm man (metropolitan area network) Glsun sun-fsw-1*2h optical switch, which is famous for its high performance, low insertion loss and compact dimension: (l)22.5*(w)11.8*(h)10.2mm. It is an ideal component for oadm, oxc, system monitoring and protection. With compact package, it can be easy to integrate into a high density optical communication system. Glsun 1*2h optical switch - specifications Model : sun-fsw-1*2h Wavelength range 850+/-40 / 1300+/-40 1260 ~ 1650 Test wavelength 850 / 1300 1310 / 1550 Insertion loss1, 2 typ:0.8 max:1.2 typ:0.8 max:1.0 Return loss1, 2 mm = 30 sm = 50 Crosstalk 1 mm = 35 sm = 55 Pdl =0.05db Wdl =0.25db Repeatability =0.02db Operating voltage: 3v or 5v Durability= 10 million Switching time =8ms Optical power =500mw Operating temperature -20 ~ +70? Storage temperature -40 ~ +85? Relative humidity 5 ~ 95% Weight 14g Dimension (l )22.5*(w)11.8*(h)10.2 *0.2mm Note: 1 within operating temperature and sop. 2 excluding connectors

1x2 optical switch-micro optical switch low insertion loss wide wavelength range low crosstalk high stability,high reliability epoxy-free on optical path latching and non-latching applications: r&d in laboratory system monitoring oadm man (metropolitan area network) Sun-fsw-1x2 optical switch, which is famous for its high performance, low insertion loss and compact dimension. With compact package, it can be easy to integrate into a high density optical communication system. 1x2 optical switch - specifications Wavelength Range : 850 / 130 �±40 1260 ~ 1650 Test Wavelength : 850 / 1300 1310 / 1550 Insertion Loss 1, 2 : Typ: 0.8 Max: 1.2 Typ: 0.6 Max:0.8 Return Loss 1, 2 : MM 30 SM 50 Crosstalk 1 : MM 35 SM 55 PDL : 0.05 WDL : 0.25 Repeatability :0.02 Operating Voltage : 3.0 or 5.0V Durability : 10 Million Switching Time : 8 ms

Introduction: 1x1 optical switch - features low insertion loss wide wavelength range low crosstalk high stability, high reliability epoxy-free on optical path latching and non-latching 1x1 optical switch - applications r&d in laboratory system monitoring oadm man (metropolitan area network) Sun-fsw-1x1 optical switch, which is famous for its high performance, low insertion loss and compact dimension: (l)27.0x(w)12.6x(h)8.2mm. It is an ideal component for oadm, oxc, system monitoring and protection. With compact package, it can be easy to integrate into a high density optical communication system.

Optical switch have a wide range of applications in fiber communication systems, and their implementation technologies are diverse, including: mechanical optical switch, thermo-optic switch, acousto-optic switch, electro-optic switch, magneto-optical switch, and MEMS optical switch, etc. The MEMS optical switch is a high-tech product based on MEMS(Micro-Electro-Mechanical System) technology. It has the characteristics of small size, low power consumption, and good expandability. It is widely used in optical network scenarios such as ROADM, iODF and fiber sensing etc.

GLSUN 2x2 Optical Switch - Features 2x2 Optical Switch - Micro Optical Switch 2x2 SM Optical Switch / 2�2 MM Optical Switch Low Insertion Loss Wide Wavelength Range Low Crosstalk High Stability, High Reliability Epoxy-free on Optical Path Latching and Non-latching GLSUN 2x2 Optical Switch - Applications R&D in Laboratory System Monitoring OADM MAN (Metropolitan Area Network) GLSUN SUN-FSW-2x2 Optical Switch, which is famous for its high performance, low insertion loss and compact dimension: (L)28.5x(W)12.6x(H)8.7mm (SM); (L)27.0x(W)12.6x(H)8.2mm (MM). It is an ideal component for OADM,OXC,system monitoring and protection. With compact package, it can be easy to integrate into a high density optical communication system. 2x2 Optical Switch - SM Specifications SUN-FSW-2x2-S Wavelength Range 1260 ~ 1650 Test Wavelength 1310 / 1550 Insertion Loss 1, 2 Typ: 0.8 Max: 1.0 Return Loss 1, 2 = 50 Crosstalk 1= 55 PDL=0.05 WDL=0.25 Repeatability:0.02 Operating Voltage 3.0 or 5.0V Durability= 10 Million Switching Time =8ms Optical Power=500mW Operating Temperature -5 ~ +70? Storage Temperature -40 ~ +85? Relative Humidity 5 ~ 95% Weight 16g Dimension (L)28.5x(W)12.6x(H)8.7 x0.2mm Note: 1 Within operating temperature and SOP. 2 Excluding Connectors. GLSUN 2x2 Optical Switch - MM Specifications SUN-FSW-2x2-M Wavelength Range 850 / 1300; 1470 ~ 1650 Test Wavelength 850 / 1300 1550 Insertion Loss 1, 2 Typ: 0.8 Max: 1.2 Typ: 0.8 Max: 1.0 Return Loss 1, 2 = 30 Crosstalk 1 = 35dB PDL=0.05dB WDL=0.25dB Repeatability 0.02dB Operating Voltage 3.0V or 5.0V Durability = 10 Million Switching Time =8ms Optical Power=500mW Operating Temperature -5 ~ +70? Storage Temperature -40 ~ +85? Relative Humidity 5 ~ 95% Weight 14g Dimension (L)27.0x(W)12.6x(H)8.2 x0.2 mm Note: 1.Within operating temperature and SOP. 2.Excluding Connectors.

Product description 2x2b optical bypass switch - introduction Sun-fsw-22b fiber optical bypass switch, which is famous for its high performance, low insertion loss and compact dimension: (l)27.0(w)12.6(h)8.2mm. It is an ideal component for oadm, oxc, system monitoring and protection. With compact package, it can be easy to integrate into a high density optical communication system. 2x2b optical bypass switch - features Low insertion loss Wide wavelength range Low crosstalk High stability, high reliability Epoxy-free on optical path Latching and non-latching Application R&d in laboratory System monitoring Oadm Sensing area Man (metropolitan area network)

Flyin optronics’ 1x2 mechanical optical switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical control signal. All flyin optronics’ 1x2 mechanical optical switch support all wavelength at 1260nm~1650nm, it offers ultra-high reliability, low insertion loss, fast switching speed as well as bi-directional performance. The optical switches are widely used for optical network, protection, transmitter and receiver protection, network test system and instrumentations. Features Unmatched low cost Low insertion loss High channel isolation High stability, high reliability Epoxy-free on optical path Latching and non-latching Applications Optical network Protection/restoration Optical singnal routing Configurable optical add/drop Transmitter and receiver protection Network test system

Created by Stephen Technologies Co.,LTD, The STE-228-X3X1 is a layer 2 fiber switch that offers along with multiple layer 3 features. The STE-228-X3X1 fiber optic switch is especially designed for telecom grade applications. It offers 24 10/100mbps fiber(SM or MM fiber), together with 4 gigabit combo ports. The combo ports of STE-228-X3X1 can be either 4 port gigabit copper, or 4 port gigabit sfp/gbic modules. It can also be configured as 2 10/100/1000Base-Tx ports, plus 2 gigabit SFP module ports. 1pc/box

Created by Stephen Technologies Co.,LTD, The STE-228-X3X1 is a layer 2 fiber switch that offers along with multiple layer 3 features. The STE-228-X3X1 fiber optic switch is especially designed for telecom grade applications. It offers 24 10/100mbps fiber(SM or MM fiber), together with 4 gigabit combo ports. The combo ports of STE-228-X3X1 can be either 4 port gigabit copper, or 4 port gigabit sfp/gbic modules. It can also be configured as 2 10/100/1000Base-Tx ports, plus 2 gigabit SFP module ports. 1pc/box

A water-cooled acousto-optic Q-Switch for use in high-power Nd:YAG laser systems. Combining top grade fused silica with high quality optical finishing and in-house anti-reflection coatings, this Q-Switch exhibits very low insertion loss and high damage threshold. Through an innovative design and manufacturing process, RF powers up to 100W may be applied. Standard options include a choice of frequencies (24 to 68MHz), active apertures (1 to 8mm), acoustic modes (compressional for linear polarisation, shear for unpolarised) and water connectors. Customised housings are available for OEMÆs.

XH-FSW-1X200 rackmount optical switch is a kind of optical path control equipment, which can control optical path manually, proximity and remote via keypad, serial communication and Ethernet communication. The FSW-1X200 rackmount optical switch is a kind of optical path control equipment, which can control optical path switching manually, near-range and remotely through keypad, serial communication and Ethernet communication. It plays an important role in optical communication applications. Optical switches are mainly Optical switch is mainly used in optical transmission system for multiple optical monitoring, LAN multiple light sources / detectors automatic switching and optical sensing multi-point dynamic monitoring The optical switch is used in optical fiber, optical device, network and field engineering optical cable testing; optical device installation and adjustment. Features (1) With small insertion loss and fast switching speed, etc. (2) The internal circuit of the optical switch is self-detecting, and the fault alarm informs. (3) The serial port adopts FT-232 industrial-grade USB to RS-232 chip. (4) LCD display is adopted to display the status of the optical circuit very intuitively, which is convenient for the userâ??s operation. (5) Can send commands through the key and serial port, network port to control the light path switching settings. And the key operation can be locked through the serial command. Performance Parameter Parameter Values Model XH-FSW-1XN-U Wavelength Range 1260~1650nm Insertion Loss 1.2 dB Repeatability 0.02 dB Return Loss 50 dB Crosstalk 70 dB WDL 0.25 dB PDL 0.05 dB Fiber Type SM(9/125um) connector FC\PC Monitoring port RJ45,RS-232 Operating power AC:100~240V Operating Temperature -10 ~ +60C Operating Temperature -40 C ~ +85 C Dimension 19 1U(483 X 230 X180)

XH-28-D1X2 OPTICAL SWITCH EQUIPMENT Features It has the characteristics of low insertion loss and fast switching speed. It can be controlled by RJ45 Ethernet or RS-232 serial port command. 28 independent control optical switch buttons, easy to operate. Two different colors of LED display lights, showing the status of the light path. Equipment power supply supports AC: 85~265V AC power supply. Performance Name Parameter Model XH-28-D1X2-U Working wavelength 850/1310nm Test wavelength 850nm Insertion loss 1.5 dB Repeatability ±0.02 dB Return loss 35 dB Crosstalk 50 dB Wavelength dependent loss 0.25 dB Polarization dependent loss 0.05 dB Switching time 10 ms Adjacent channel Fiber type MM 50/125um) Connector form LC\PC customizable Monitoring port RJ45 RS-232 Working power AC 85~265V Operating temperature -5 ~ +55 Storage temperature -40 ~ +85 Chassis size 270mm X 190mm X 135mm