1400Ma Constant Current Dali Driver Suppliers and Manufacturers

1. Input voltage: 110-240V/AC 2. Output voltage: 9-40VDC 3. Output current: 1050mA/1200mA/1400mA*1Channel 4. Dimension: L185*W55*H36MM 5. Dimming type: DALI/PUSH-DIM 6. The current can be selectable by DIP switch

Lt-401-cc cc dimming driver Input signal,Dali digital dimming signal Input voltage,Dc12v,161;,171;dc48v Output voltage,Dc3v~dc46v Output current,Cc 350/700/1050ma 3 in 1,161,1ch Driving leds,1-13 leds in series connection( 1w/3w/5w) Dimming range,0,161;,171;100%

1. Input voltage: 110-240V/AC 2. Output voltage: 9-26VDC 3. Output current: 350mA*1Channel 4. Dimension: L142*W45*H27 5. Dimming type: DALI/PUSH-DIM

1. Input voltage: 110-240V/AC 2. Output voltage: 9-40VDC 3. Output current: 700mA*1Channel 4. Dimension: L162*W45*H30MM 5. Dimming type: DALI/PUSH-DIM

1. Input voltage: 110-240V/AC 2. Output voltage: 9-40VDC 3. Output current: 1000mA*1Channel 4. Dimension: L162*W45*H30MM 5. Dimming type: DALI/PUSH-DIM

1. Input voltage: 110-240V/AC 2. Output voltage: 9-26VDC 3. Output current: 450mA*1Channel 4. Dimension: L142*W45*H27 5. Dimming type: DALI/PUSH-DIM

1. Input voltage: 110-240V/AC 2. Output voltage: 9-40VDC 3. Output current: 450mA*1Channel 4. Dimension: L162*W45*H30MM 5. Dimming type: DALI/PUSH-DIM

12v 50w ultra thin slim led driver constant voltage constant current led driver supplier Ultra thin led driver price constant current led driver led driver Specifications Model Number OTMSS50-12 Input Voltage 100-240V AC Output Power 50W Output Voltage 12V dc Output Current 4.16A Efficiency >  86% PF >0.9 Current Accuracy 5% THD 0.95 5. Non flickering CV led driver 6. LED driver height less than 16.5mm,22mm 7. 3 years warranty 8. Professional datasheet and drawing available. 9. Laser print customers logo free on the led driver 10. Ultra thin led driver free sample can be support   At present, our 60W can be with height 16.5mm. Few other supplier in this line can do it!!!!  FAQ about OTTIMA LED driver 1. What the difference of constant voltage led driver and constant current led driver? Constant current means the output current is a relatively fixed value. Such as 350mA, 500mA, 700mA Constant voltage means the output voltage is a fixed value, such as 12Vdc, 24Vdc, 36Vdc, 48Vdc 2. How to choose led driver? You can tell me what led light you will use for, what output voltage and what output current need, then we will recommend you suitable led driver. Or you can ask your LED light supplier to send us a led light sample, then we will test the spec and match the suitable led driver. 3. What led driver you can supply? We can supply constant current led driver, constant voltage led driver, dimmable led driver and non dimmable led driver, indoor led driver, outdoor led driver, open frame led driver, IP20 LED driver, IP67 led driver, round led driver, ultra thin led driver. LED tube driver. 4. What dimmable led driver you can supply? We can supply triac dimmable led driver, 0/1-10v dimmable driver, PWM dimmable driver, DALI driver, push dimmable driver, DALI+push led driver, 5 in one dimmable led driver. 5. Can you add the plug for the led driver for me? Yes, we can add plug you need to our led driver. Such as AU plug, UK plug, Euro plug, America Plug. You can ask your plug supplier delivery the plug to us. We can also purchase plug and add it to our led driver.  We are a worldwide supplier of LED Driver established in 2006. Our products such as LED Driver, LED Power and LED Adaptor are CE, ROHS, SAA, C-tick, RCM, FCC and ETL approved. For more information about LED adaptor, please click here. https://www.ottima-power.com/

Place of Origin Guangdong, China (Mainland) Brand Name Brightstar Model Number MSD-CC-200W PF >0.97 Capacitor Ruby Efficiency >0.89 Isolation YES Input voltage(V) 90-260V /50/60HZ Output voltage(V) 30-36V Current(A) 1.8A Certification CE/RoHS Waterproof IP68 Customized YES Parameters : PF >0.98 Efficiency >0.89 Isolation YES Input voltage(V) 85-265V /50/60HZ Output voltage(V) 20-60V Current(A) 1-3A Capacitor Ruby Certification CE/RoHS Waterproof IP68 Customized YES Aging time >24hs Protection Short circuit&Over voltage and Over load protection Warranty 3years MOQ No. Packed by small box for each one respectively first, then packed with carton. 240*70*40 Carton size:32*25*27.5cm 18pcs /carton.

1. Input voltage: 12-24V/DC 2. Output voltage:12-24VDC 3. Output current: 10A*1Channel 4. Dimension: L142*W45*H27 5. Dimming type: DALI/PUSH-DIM

1. Input voltage: 110-240V/AC 2. Output voltage: 24VDC 3. Output current: 2.8A*1Channel 4. Dimension: L185*W55*H36MM 5. Dimming type: DALI/PUSH-DIM

1. Input voltage: 110-240V/AC 2. Output voltage: 12VDC 3. Output current: 5.5A*1Channel 4. Dimension: L185*W55*H36MM 5. Dimming type: DALI/PUSH-DIM

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".

Lt-701-cc cc 0/1-10v dimming driver Input signal,0/1-10v or push-dim Input voltage,Dc12v~dc48v Output voltage,Dc3v~dc46v Output current,Cc 350/700/1050ma 3 in 1¡¨¢1ch Driving leds,1-13 leds in series connection( 1w/3w/5w) Dimming range,0~100%

Model No.: HSD-80310-CC Size: L258xW35xH25mm Weight:300gm Ac input Voltage range: 90-265V Output Voltage: 32-80V Max output power: 25W Max output current: 310mA PF: í¦0.95 Operating temperature: -20 to +45C Storage temperature: -40 to +85C Short circuit/Overload/Over Voltage/Over Temperature IP 67 design for indoor or outdoor installations 100% full load burn-in test Voltage Resistance: AC 1.5KV/5mA 1Min(Input to Output & housing) Suitable for LED lighting and sign applications 2 year warranty Safety: CE / RoHS Compliance to EN61347-1: 2001 / EN61347-2-11.2001; Compliance to EN55015, EN61547 Compliance to EN61000-3-2, -3 SELV It have been designed specifically to operate LED with a current of 700mA or 350mA: It provides a maximum output of 60W at a voltage range from 5-85VDC and 5V dimming input. To give our customer a perfect solution for dimming control, we also provide waterproof potentiometer, it is installed in a flush-mounted box and connected to dimmable power supply directly, easy and simple to use, you can control many PCS of LED power supply in one Potentiometer.