Model: JMY680H 1.Product introduction JMY680H is a RFID read/write module with an UART/IIC/RS232C serial port. The module has various functions and supports the ISO/IEC14443A&B and ISO15693 and ISO7816 contactless cards. Users operate the module via simple command. The module embedded with SAM slot that operate contact smart card according to ISO7816. The module builds in antenna. 2.Characteristics PCD model:NXP CL RC632 Working frequency: 13.56MHz Card supported:Mifare 1K/4K, FM11RF08, Ultra Light, DesFire, Mifare ProX, SR176, SRI512, SRI1K, SRI2K, SRI4K, SRIX4K, T=CL smart cards(both ISO14443A & ISO14443B) , TI TagIt, I.Code SLI, ST LRI and other tags according to ISO15693 and ISO7816 SAM cards (both T=0&T=1) Anti collision ability:Full function anti collision; be able to process multi-cards; be able to set operate single card only Auto detecting card:Supported, default OFF SAM slot:1 slot SAM baud rate:9600bps/38400bps ISO7816 PPSS set:supported EEPROM:512 Bytes Power supply:DC 5V Interface:IIC/UART/RS232C (select when place order) Communication rate:IIC:400Kbps UART: 19.2Kbps/115.2Kbps Max. command length:254 Bytes Interface level:UART/IIC: 3.3V (TTL level; 5V tolerance) Power consumption: 150mA Operating distance:150mm (depending on card) Dimension:70mm*50mm*16.5mm Weight:About 120g ISP:Supported Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF RoHS:Supported 3.Protocol There are UART, IIC or RS232C three optional types of interfaces between the host and module. IIC has the advantage of high communication rate and convenient operation. RS232C has long operation distance. Users select the interface according to the special system. 4.Automatic detecting card The automatic detecting card function supports the ISO14443A and ISO15693. This function supports only one card operation. Inner package: box (size: 17.5*14*7cm) Outer package: carton (size: 48*32*24mm) Weight: 330g Terms of delivery: dhl, tnt Delivery time: 5 working days after receive payment.
Key features: Dc3.3v ~5v power supply, uart-ttl interface Compliant with iso14443a/b, iso15693 standard, Support mifare classic 1k /4k, mifare ultralight/ultralight c, mifare pro, iso14443a-4 contactless cpu card, i code sli, ti 2048, etc External antenna, reading range up to 5 ~ 7cm External led and buz available (external driver circuit needed) Technical Parameters: Electrical Specification Power supply DC 3.3V ~ 5V Power consumption Max current
Key features: Dc3.3v ~5v power supply, uart-ttl interface Compliant with iso14443a standard, Read/write or read only uid of mifare classic 1k /4k, mifare ultralight, mifare ultralight c etc Available with e-wallet increment, descrement, backup value, etc External antenna, reading range up to 5 ~ 7cm External led and buz available ( external driver circuit needed) Technical Parameters: Electrical Specification Power supply DC 3.3V ~ 5V Power consumption Max current
Key features: Frequency available with 125khz 3.3v ~ 5v dc power supply, uart-ttl interface R/w or read-only uid of t5577 and its compatible cards; Available to set to read different page or block address with password; Optional output as wg26, wg34 or uart ttl External antenna, reading range up to 5~7cm External led&buz available( external driver circuit needed Technical parameters: Electrical specification Power supply dc 3.3v-5v Power consumption < 45ma Operation frequency 125khz Baudrate 9600~115200 bit/s ( default 9600bps) Interface uart ttl Antenna external, stamp-hole Reading range 50- 70mm (depends on tag and antenna size) Mechanical specifications Dimension 25mmx16.5mmx2.8mm (lxwxh) Weight 3g Material fr-4, blue Model chk102mt Environmental conditions Operation temperature -20 +80 degree Storage temperature -40 +85 degree Humidity relative humidity 595% Supported standard/ tags T5567,T5577 and compatible cards Sdk information Demo software windows, c# program language Files comprotocol document User manual Demo.Exe
Key features: Dc3.3v ~5v power supply, uart-ttl interface Compliant with iso14443a standard, Read/write or read only uid of mifare classic 1k /4k, mifare ultralight, mifare ultralight c etc Available with e-wallet increment, descrement, backup value, etc External antenna, reading range up to 5 ~ 7cm External led and buz available ( external driver circuit needed) Technical Parameters: Electrical Specification Power supply DC 3.3V ~ 5V Power consumption Max current
Card supported: mifare s50, mifare s70, ultralight, and mifare pro Pcd model: rc500 / rc531 / rc632 Power supply: dc 4.5v to 5.5v Max. Power consumption: 150ma (100ma while no beep) Typical operate distance: 100mm (mifare one) Dimension: 123 * 88 * 25 (mm) Sam slot amounts: 2 Software; free sdk Delievry in 5 days after the payment is received. Inner package: plastic foam Outer package: box/carton Weight: 330g Terms of delivery: dhl, tnt, ups Delivery time: 5 working days after receive payment.
Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 80mm (Mifare One, normal distance) SAM card slot: 2 slots, Supported: ISO7816 T=0, Supported: 9600bps&38400bps Interface: RS232C or USB (build-in USB to UART converter) Baud rate: 9600 ~ 115200 bps Power supply: DC5V Power consumption: 180mA Dimension: 141mm¡Á100mm¡Á31mm Weight: about 100g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF. 1 pc/box, box size: 16*12*5cm.
Typical applications: Transportation Government Home -banking Health care 180; medical identification. Signature applications of IC card:
Name mobile express card reader / writer Certification ce,fcc,rohs,mic Explain features -plug and play setup,hot swappable -support usb port power -card supported: 1) ms/ms pro/ms duo/ms pro duo/ms mg pro/ms mg/ms mg duo/ms Mg pro duo/extreme ms pro/extreme iii ms pro/hs ms pro/hs ms Pro duo/ms rom/ms select 2) sd/mini sd/hs mini sd/extreme sd/extreme iii sd/ultra ii sd/sd- Ultra-x/ultra speed sd/sd pro/sd elite pro/hs sd/ xd card 3) mmc/mmc 4.0/hs mmc/hs rs mmc/rs mmc/rs mmc 4.0/mmc Mobile/mmc micro/micro sd/t-flash 4) cf card 5) m2 -auto detect card memory. -up to 480mbps
Key features: Dc5v power supply from usb; usb com port; Compliant with iso14443a/b, iso15693, iso7816 t=1 standard; Support read/write contactless series cards and contact smart sam cards. Embedded with one smart contact card socket under iso7816 t=1 standard; Available to operate desfire picc level, application id create/delete/format, etc Support to create standard datafile&backupfile, and valuefile, recordfile, etc Dimension with 80mmx84mmx12mm, Internal led&buz for status indication, one smart sam card socket. Technical parameters: Electrical specification Power supplydc 5v from usb Power consumption max current
Key Features: 3.3V ~ 5V DC Power supply, RS232 or UART TTL; Compatible with ISO14443 A/B, ISO15693 ,ISO7816 T=0 PSAM card standard R/W MIFARE Classic 1K /4K, MIFARE Ultralight/Ultralight C, MIFARE DESFire, ISO14443A-4 contactless CPU card, I CODE SLI, etc Internal with 4 PSAM socket External antenna with 1.25 2P connector/IPX, reading range up to 5~7 cm Internal BUZ available for indication Technical Parameters: Electrical Specification Power supply DC 3.3V ~ 5V Power consumption < 150mA Operation frequency 13.56MHz Baudrate 9600~115200 bit/s ( default 115200bps) Interface UART TTL or RS232 Antenna External with 1.25 2P connector or IPX Reading range 50- 70mm (depends on tag and antenna size) Mechanical Specifications Dimension 76mmx50mmx2.8mm (LxWxH) Weight 10g Material FR-4, Blue Model CHK362MT Environmental Conditions Operation temperature -20 to +80 degree Storage temperature -40 to +85 degree Humidity Relative humidity 5% to 95% Supported Standard/ Tags ISO14443 A Read/write: MIFARE Classic 1K /4K, MIFARE Ultralight, MIFARE Ultralight C, MIFARE DESFire EV1, MIFARE Smart MX, MIFARE Plus S / X, MIFARE Pro X, NTAG 21x Read UID only: Read UID only of all other ISO14443A RFID tags ISO14443 B SRI4K, SRIX4K, AT88RF020, 66CL160S, SR176 ISO15693 EM4135, EM4043, EM4x33, EM4x35, I-Code SLI / SLIX, M24LR16/64, TI Tag-it HF-I, SRF55Vxx (my-d vicinity) ISO7816 PSAM T=0, T=1 standard SDK information Demo software Windows, C# program language Files Comprotocol document API document User Manual Demo.exe
Act-a6 series motorized card reader/writer supports rf/ic card r/w and magnetic card r, which is a product created from many years of technology and experience accumulation of act and the market demand. Act-a6 is designed based on the development concept that integrates multiple functions. Careful material selection, rational structure and stable circuit design make it a highly reliable product, meanwhile, its bezel is designed with a user-friendly led; all these enable act-a6 to better meet the market requirements for motorized card reader/writer.
Module no.: mr701shk/uh Interface: rs232/usb Protocol support: iso14443a+iso14443b+iso15693 Card supported: mifares50, mifares70, mifare ultralight, mifare pro, st sr176, st srix4k, atmel at88rf020, sle66cl160s-b, other contactless cpu card compliant with iso14443-4 type-b, tag-it hf, i.Code sli, other tags compliant with iso15693. Pcd model: rc500 / rc531 / rc632 Power supply: dc 4.5v to 5.5v Max. Power consumption: 150ma (100ma while no beep) Typical operate distance: 100mm (mifare one) Dimension: 123 * 88 * 25 (mm) Weight: about 100g Sam slot amounts: 2 Data flash: 0 Display digits: 0 Led: 1 tricolor Isp: supported Free sdk Inner package: box (size: 17.5*14*7cm) Outer package: carton (size: 48*32*24mm) Weight: 330g Terms of delivery: dhl, tnt Delivery time: 5 working days after receive payment.
Jmy501 series rf module includs:jmy501a, jmy501c, jmy501d, jmy501e, jmy501g, jmy501h, jmy501m. Each model has its own characteristics. Model: jmy501h 1.Introduction Jmy501h is a rfid read/write module with an uart and iic serial port. The module supports iso/iec14443a&b and iso/iec15693 contactless cards. The module has various functions. User operates the module via simple commands. The module has excellent performance and stability. The antenna is separated from the module. 2.Characteristics Pcd model:nxp cl rc632 Working frequency: 13.56mhz Card supported:mifare 1k/4k, fm11rf08, ultra light, desfire, mifare prox, sr176, sri512, sri1k, sri2k, sri4k, srix4k, t=cl smart cards(both iso14443a & iso14443b) , ti tagit, i.Code sli, st lri and other iso15693 tags Anti collision ability:full function anti collision; be able to process multi-cards; be able to set operate single card only Auto detecting card:supported, default off Eeprom:512 bytes Power supply:dc 5v Interface:iic & uart (selected by sps pin, recommend to use iic) Communication rate:iic:400kbps, uart:19.2kbps/115.2kbps Max. Command length:254 bytes Interface level:3.3v(ttl level; 5v tolerance) Power consumption: 70ma Operating distance:100mm(depending on card and antenna design) Dimension:42mm¡Á21mm¡Á8mm Package:dip32 Weight:about 15g Isp:supported Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF Rohs:supported 3.Antenna We supply the antennas. There are three models: tx500, tx501 and tx502. The antenna customization is welcomed. Outer package: carton (size: 48*32*24mm) Weight: 100g Terms of delivery: dhl, tnt Delivery time: 5 working days after receive payment.
Key features: 3.3v ~5v power supply, uart-ttl interface; Tiny size, single-face laying components with stamp-hole Compliant with iso14443a/b, iso15693, iso18092 standard Support iso7816 standard psam/cpu card; Read/write or read uid only working mode Support to create standard data file, back-up data file, value file, linear record file, cyclic record file and transaction mac file) Support key authenticate, get key version, change key, etc; Available to operate desfire picc level, application id create/delete/format, etc Support for standardized encryption algorithms (des, 3des, and aes, mac), etc External led and buz available (external driver circuit needed) Technical Parameters: Electrical Specification Power supply DC 3.3V ~ 5V Power consumption Max current
Product Description CJT-A6 series motorized card reader/writer supports RF/IC card R/W and magnetic card R, which is a product created from many years of technology and experience accumulation of ACT and the market demand. CJT-A6 is designed based on the development concept that integrates multiple functions. Careful material selection, rational structure and stable circuit design make it a highly reliable product, meanwhile, its bezel is designed with a user-friendly LED; all these enable CJT-A6 to better meet the market requirements for motorized card reader/writer. Product Features *EMV and PBOC certified. *Supports ISO7810/7811 magnetic card reading only. *Supports ISO7816-2 contact IC card reading/writing. *Supports ISO14443-A Mifare Type A/B card reading/writing. *Jitter card-in function: effectively precludes unauthorized card reading. *Protruding bezel: for anti-theft is available *Bezel with LED light: provides card insertion indication and/or lighting and prevents the card being left inside. *Independent sensor design: makes reader maintenance easy. *Dustproof sensor lens: prevents sensor from dust and/or the other foreign materials. *Mechanical shutter for protection against dust and/or the other foreign materials in the bezel position: enhances the reliability of the card reader. *Four-set driving wheels: ensure the card transmission stability and liability and prevent card jam or block. *One group of driving wheels in front of mag-head: enables automatic re-reading, which increases success rate of card reading. *Card detecting function: automatically handles abnormal cards (broken card, incomplete card, etc.) and is able to eject card in case of power failure. *Self-balancing mag-head reading function: provides stable reading and easy maintenance. *High-performance plastic materials: ensure reading precision and product consistency. CUSTOMIZABLE We can make products according to your needs.
This tag is uhf frequency(include 860~868mhz and 902~928mhz), it can support iso18000-6c(epc gen2) protocol to read and write, the read range depends on the reader.It made by pu material, the size is 68*80*2mm. We also can provide oem service, such as print on the tags according customer's specific requirement. Package:100pcs/packet Weight:1.5kg/packet
This tag is uhf frequency(include 860~868mhz and 902~928mhz), it can support iso18000-6c(epc gen2) protcol to read and write, the read range can up to 10~12m if use our uhf long range reader at the normal environment. The size is 110mm*45mm*0.3mm, we also can help customer customize different size according customer's specific requirement. It made by self-adhesive paper, can be fixed on the car windshield directly, mainly used for vehicle management in parking application. Package:200pcs/box.500 or 1000pcs as one roll
Key Features: 3.3V ~ 5V DC Power supply, RS232 or UART TTL; Compatible with ISO14443 A/B, ISO15693 ,ISO7816 T=0 PSAM card standard R/W MIFARE Classic 1K /4K, MIFARE Ultralight/Ultralight C, MIFARE DESFire, ISO14443A-4 contactless CPU card, I CODE SLI, etc Internal with 4 PSAM socket External antenna with 1.25 2P connector/IPX, reading range up to 5~7 cm Internal BUZ available for indication Technical Parameters: Electrical Specification Power supply DC 3.3V ~ 5V Power consumption < 150mA Operation frequency 13.56MHz Baudrate 9600~115200 bit/s ( default 115200bps) Interface UART TTL or RS232 Antenna External with 1.25 2P connector or IPX Reading range 50- 70mm (depends on tag and antenna size) Mechanical Specifications Dimension 76mmx50mmx2.8mm (LxWxH) Weight 10g Material FR-4, Blue Model CHK362MT Environmental Conditions Operation temperature -20 to +80 degree Storage temperature -40 to +85 degree Humidity Relative humidity 5% to 95% Supported Standard/ Tags ISO14443 A Read/write: MIFARE Classic 1K /4K, MIFARE Ultralight, MIFARE Ultralight C, MIFARE DESFire EV1, MIFARE Smart MX, MIFARE Plus S / X, MIFARE Pro X, NTAG 21x Read UID only: Read UID only of all other ISO14443A RFID tags ISO14443 B SRI4K, SRIX4K, AT88RF020, 66CL160S, SR176 ISO15693 EM4135, EM4043, EM4x33, EM4x35, I-Code SLI / SLIX, M24LR16/64, TI Tag-it HF-I, SRF55Vxx (my-d vicinity) ISO7816 PSAM T=0, T=1 standard SDK information Demo software Windows, C# program language Files Comprotocol document API document User Manual Demo.exe
Key features: Dc5v power supply from usb; usb com port; Compliant with iso14443a/b, iso15693, iso7816 t=1 standard; Support read/write contactless series cards and contact smart sam cards. Embedded with one smart contact card socket under iso7816 t=1 standard; Available to operate desfire picc level, application id create/delete/format, etc Support to create standard datafile&backupfile, and valuefile, recordfile, etc Dimension with 80mmx84mmx12mm, Internal led&buz for status indication, one smart sam card socket. Technical parameters: Electrical specification Power supplydc 5v from usb Power consumption max current
