EN590 10 ppm diesel available FOB Singapore & Fujairah, Transaction terms are Tank To Tank, Tank To Vessel or Vessel To Vessel, very competitive prices.
Hallo Good day we supplying Jet Fuel A 1 and EN 590 10 PPM and 50 PPM - Origin Kazhakstan and other Non sanctioned Countries Very genuine refinery - we have on going contracts - Long chain brokers please dont contact unless have direct contact with END buyer or Buyer Mandate - Need ICPO from direct buyer to refinery we assure best price and mark up ( conditional ) we can provide TTV, TTT, TTO , CIF , FOB
Dear Buyers, We have EN 590-10 PPM Diesel available in Singapore TANJUNG BRUAS PORT on 27th August 2023. We can share Bill of Lading, IMO number, Entrustment letter. Quantity will be 100,00 MT. Please contact immediately. Regards.
* Quantity MIN 50,000MT x 12 months * Origin: German Origin Specifications: The products are in accordance with the specifications requested by The Buyer or presented by The Seller. * Payment: By MT103/760 * Price/Commissions: Final price to Buyer is the Gross, including all commissions. * Payment is then made by Seller, who carries out all commissions transfers. *Contract: 12 Months with possible rollovers. * Inspection: SGS or similar * CIF SBLC PROCEDURE - Summary of our procurement process:- 1. Buyer issue an RFP (Per attached template -w- specification sheet) 2. We issue a commercial offer with all relevant tacit data 3. Buyer returns signed commercial offer in conjunction with a Banker Signed RWA letter (Verbiage will be attached in the commercial offer) 4. Seller issues the Sales & Purchase Agreement 5. The Contract is formalized and lodged with respective bankers 6. Buyer's Banker issues a Pre-Advice MT799 7 Seller issues the Price Lock Notice (a discount is set on this day per the Platts Assessment of the day) 8. Buyer Banker issues the collateral (MT760) 9. Seller's Banker issues 2% Performance Bond 10. Seller charters the vessel/barges 11 Seller berths the vessel/barges 12. Seller loads the vessel/barges 13. Seller issues Product & Shipping Documentation (Digitally AND via courier) 14. Vessel/Barge departs for destination
Origin: Kazakhstan or non-Embargo Country Specifications: En590-10ppm, Euro 5 Grade with non-Biodiesel content*** Packaging: Bulk Shipment Delivery Method: FOB, CIF Destination: CIF (ASWP), FOB (Rotterdam, Jurong, Houston, Fujairah, China) MOQ: 50,000 MT/mth (12 mth contract); Trial Lift Available) Note: Price FOB/CIF may vary from listed (slight negotiation possible, depending on order volume)
We supply Diesel Fuel 100 ppm EN 590 on FOB and CIF Incoterms. FOB available from Rotterdam, Houston, and Fujairah. Occasionally we have spot deals. PRODUCT ORIGIN: Kazakhstan Contract directly with the Refinery. Send us an LOI to info@odissiglobal.com The EN 590 standard is the European diesel fuel specification for low sulphur content diesel and describes the properties diesel fuel must meet if it is to be used in automobiles. This specification of diesel is the grade required by a diesel-engine road vehicle (DERV) and the majority of agricultural machinery.
Hello dear Buyers !!! My name is Semyon, and I'm a top manager of Rosneft. We are pleased to offer you EN590 10PPM diesel fuel and Jet A-1 aviation kerosene on favorable terms. We allocate volumes for petroleum products and can offer non-sanctioned fuel options. Our prices are as follows: - FOB Novorossiysk 560 $ per metric ton. FOB Rotterdam - EN590 10PPM - $610 per metric ton FOB Rotterdam - Jet A-1 - $85 per barrel. To start cooperation, please send to my mail: LOI, bank account statement, CIS. Contact us to discuss the details and get more information: **Phone**: â?ª+353 83 029 8771â?¬
Dear customer, we invite you to consider Diesel 590 10 ppm. We are direct traders with refineries FOB Rotterdam TTT - $620 Payment - MT 103 From the buyer: 1. CIS companies + ICPO 2. Confirmation of money (possibly BCl) 3. Agreement (TSA) After verification, a commercial invoice and draft contract are immediately provided.
PRODUCT: EN590 10PPM ORIGIN: NON SANCTION ORIGIN QUANTITY: 100,000 MT ( +/- 5% ) SPOT IMMEDIATE CONTRACT QUANTITY: AFTER SUCCESSFUL SPOT COMPLETED 300,000 MT ( +/-5% ) PER MONTH DELIVERY BASIS: CIF ASWP ( EUROPE ) AS INSTRUCTED BY BUYER TERMS OF PAYMENT: BY SBLC MT760 / BANK GUARANTEE BY MT103 ON COMPLETION OF Q&Q INSPECTION BY SGS OR EQUIVALENT PRICE: CIF NWE / BASIS ARA ( CODE : AL0RA00 ) DISCOUNT OF USD$40.00/- PER MT NET TO BUYER
FOB Houston, Rotterdam, Jurong available CIF ASWP available
PRODUCT: EN590 10 PPM DIESEL ORIGIN: NON-RUSSIAN DESTINATION PORT: ASWP QUANTITY MIN.: 100,000 MT TRIAL; 100,000 MT MONTHLY X 12 MONTHS WITH R&E PRICE CIF: US$510/MT GROSS
EN590 10 PPM - TTT (FOB Rotterdam & Houston) Minimum quantity: 25,000 Metric tons per month Maximum quantity: 300,000 Metric tons per month Procedure: 1. Buyer accepts seller's working procedure and issues ICPO to the End seller via Seller's representative. 2. Seller issues a commercial invoice and Buyer signs and returns commercial invoice on the due date along with Buyer TSA. 3. The Seller issues the following PPOP to the buyer for evaluation: a) Statement of Product Availability b) IPA c) Letter of Guarantee Upon receipt of the above PPOP Documents, the buyer provides signed IPA (Injection Programming Agreement) with his tank company to engage in injection Programming. 4. Seller provides the buyer with an Injection program a) Fresh SGS, b) Certificate Of Origin. c) ATSC (Authority to Sell and Collect) d) Tank Storage Receipt (TSR) e) Injection Report, and ATV (Physical Verification) with Unconditional DTA for Dip Test in the seller tank for product reconfirmation before injection into buyer tank. f) NCNDA/IMPFA draft to be signed by all intermediaries to secure commission. 5. Buyer makes 100% payment by MT103 TT wire transfer for the total product and Seller pays commission to all intermediaries involved in the transaction within 24 hours after confirmation of the buyer's payment. 6. Seller issues draft SPA to the buyer to review for R&E monthly deliveries. 7. Buyer reviews and approves the SPA and issues SBLC/IRDLC irrevocable, non- transferable, auto revolving for 12 months shipment value, documentary letter of credit for length of contract and for each lift per schedule. Buyer pays after Dip Test by MT103 Wire Transfer one each monthly quantity. 8. The subsequent delivery shall commence according to the terms and conditions of the contract. 9. Seller pays commissions to all intermediaries as per IMFPA/NCNDA 24 hours after receiving payment from the buyer.
Transaction algorithm: 1. The Customer provides the LOI to the Supplier for consideration and decision-making on possible cooperation. 2. The Supplier, having considered the LOI, sends a Soft Corporate Offer to the Customer. 3. The Customer, having considered the SCO, provides the supplier with an ICPO confirmed by the bank, which will take part in the transaction as a guarantor of the transaction on the part of the Customer. 4. The Supplier accepts the Customer's ICPO and submits the Full Corporate Offer (FCO) for review by the customer. 5. The Supplier submits to the Customer a Sample General Contract for the supply of goods for study and adjustments. 6. After agreeing on the general contract, the Supplier and the Customer carry out the procedure for signing the contract and its verification. At the time of signing the contract, the parties exchange the documents, which are confirmed by banks that serve the parties and conduct transactions on the transaction. 7. The customer issues Proof of Funds (POF) confirmed by the customer's bank, the Supplier transfers to the customer Proof of Product (POP) confirmed by the Supplier's bank. 8. When signing an annual contract, the Customer provides the Supplier with an annual bank guarantee in the form of a Standby Letter of Credit from a bank with an international credit rating of at least A +, this guarantee is equivalent to the cost of the monthly volume of delivery of goods and is a guarantee of payment of funds for the goods in the event of force majeure. 9. To open the Customer's bank guarantee, the Supplier shall provide a Performance Bond determined as a percentage of the price. 10. After carrying out the procedures indicated above, the process of accumulation of goods in the Port begins, the charter of the vessel is provided and the delivery of goods is carried out in accordance with the schedule of deliveries and quality and quantity checks under contractual obligations. 11. After the arrival of the goods at the port of the Customer, the quality and quantity of the goods are checked and controlled. 12. The Customer, having received the goods at the port, pays by direct payment MT 103 to the Supplier's bank account for the full amount of the cost of the goods delivered in a specific period of time. Payment is made no later than 3-5 days from the date of receipt of the goods. Supplier's Guarantee Bank: JP Morgan Chase New York (AAA credit rating). The customer's bank must meet international standards and have an international credit rating of at least A +. If the Customer's bank has a credit rating below A +, then the transaction is possible only if there is confirmation of the guarantees of a bank with a low rating by an international bank with a rating not lower than A +. In other cases, the transaction will not be implemented. The following deliveries are carried out according to the schedule, which is an integral part of the general contract.
Malaysian Diesel, EN590 10 PPM. 100,000,000 metric tonnes for sale. Please contact me for more information if interested.
Can supply 10 ppm diesel to meet european specifications from fob houston. Contact if interested and qualified.
Can supply 10 ppm diesel to meet european specifications from fob houston. Contact if interested and qualified.
Product: EN590 10PPM - Quantity: 50,000 MT - Price: $680 Net per MT FOB Fujairah (Tank to Tank or Tank to Vessel) FOB Procedure DIP & PAY Fujairah: 1. Buyer issues ICPO with full banking information along with full KYC. 2. Seller issues Invoice (CI) for the available quantity in the Sellerâ??s Storage Tank to the Buyer. Buyer signs and returns the CI to the Seller. 3. Buyer issues MT199 as proof of funds, CPA/TSA to Sellers account from prime 50 top bank/ bank to bank verification (companythat will send ICPO must be the same that will issue the MT 199, no JVâ??s with exits, or other agreement with end buyers accepted). 4. Seller presents the following documents to the Buyer to conduct Dip Test in Sellerâ??s tank: A. Unconditional Dip Test Authorization (DTA); B. TSR; C. Certificate of Origin. 5. Buyer conducts Dip Test in the Sellerâ??s Tank and upon successful Dip Test immediately provides the Seller with Q88 or valid verifiable TSR. 6. Seller signs NCNDA/ IMFPA with intermediaries for non disclosure and payment if commissions to be paid out immediately upon receipt of payment from the buyer. 7. Buyer issues 100% MT103/TT Wire Transfer payment to the Seller. 8. Seller signs Tank To Vessel Injection Agreement (TTVIA) or tank to tank (TTIA) to commence injection of product into the Buyerâ??s vessel or TSR FROM BUYER TO COMMENCE INJECTION OF PRODUCT TO BUYER'S TANK with Full coordinates. Seller transfers the Title of the product Ownership to the Buyer. 9. Buyer and Seller sign a long term contract for the consistent supply for a mutually agreeable quantities.