0 5Ms Exposure X Ray System Plx8500E F Suppliers and Manufacturers

FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

1, Safe working load: 200kg 2, The back board folding angle: 70 3, The thigh board folding angle: 30 4.TR/ATR:0-20 5, The four motors automatically realize various positions. The motors are selected from internationally renowned brand Timotion, which are safe and noiseless. 6, Two control methods, operation handle control and guardrail built-in button operation, control handle is clear and easy to operate; built-in buttons on the side rail near headboard, graphic display, clear at a glance. The key has lock function, which reduces the probability of misoperation and locks safely. 7, Side rail: 1),Two side rail in each side of bed. 2),It can be automatically locked when raising, and each guardrail can bear more than 50KG. 3), Guardrail safety switch design, placed under the guardrail to avoid misuse of the patient; 4), Equipped with gas spring for easy operation. 5), The steel structure of the guardrail base is welded on the bed to ensure safety. 6), The 4-pieces guardrail has angle indicator that allows the caregiver to quickly and easily adjust the backrest angle and TR/ATR angle of the bed. 7),It equipped with guardrail built-in button to make it easier for the patient to operate the bed. 8, Casters 1), The four casters use 125mm center control one. 2), Steel structure, precision ball bearings are placed in the rotating head and the caster, the caster frame is equipped with a wheel cover made of synthetic material, suitable for locking the lever with a cam hole. Caster surface material: polyurethan, passed EN 12531 standard, single dynamic (force) load is not more than 175 kg, static load is not more than 200 kg 3),Braking system: Pedal-type synchronous braking arms on both sides of the bed, adopting all-metal structure, compact structure and reliable braking. 9, Shank board can be adjusted manually by simple steel support for convenience position. 10, At the 4 corners of the bed, there is an diameter HDPE anti-collision wheel which intergated on H/F board. 11, There are 1 hook in each side for drainage bag. 12, It equipped with manual CPR for emergency treatment.

Artemisia absinthium, herba High quality dried organic or conventional Absinth wornwood herb for wholesale Preparations from the plant are used to stimulate appetite and improve digestion. The herb is included in choleretic and appetizing teas. Hamazulene, a substance isolated from wormwood, has an anti-inflammatory and antispasmodic effect and is used for X-ray burns, eczema, rheumatism and bronchial asthma.Wormwood is eaten by animals, stimulates appetite and improves digestion, but gives their milk a bitter taste. Bitter wormwood is used in liquor-vodka production to prepare vodka, liqueurs, vermouth, absinthe, but long-term use of such drinks leads to strong excitement of the nervous system. When brewing beer, it is used instead of hops. Country of origin - Ukraine

Product Name Android MiniPOS Aisino A80 OS Android 7.1 Secure operating system Processor 32-bit, Quad-core, 1.1Ghz application processor High performance secure processor Memory RAM: 1GB (optional 2GB) ROM: 8GB (optional 16GB) Display 5 Color screen 1280 720 Touch Screen Capacitive touchscreen Keys 1 Power key 1 Function key 3 Touch keys WIFI 2.4GHz IEEE802.11b/g/n Communications 4G 3G 2G Bluetooth BT 4.X Card Readers IC card reader NFC reader Camera 2 MP Rear Camera 1D/2D barcode scan Optional: 5MP rear zoom camera GNSS GPS GLONASS BeiDou Indicator Lights 4 NFC LEDs 1 Charging indicator Audio Speaker Microphone Card Slots 1 SIM 2 PSAM Battery 3.85V/3000mAh Dimensions 150 75 16mm L W H Weight 220g Peripheral Port 1 USB OTG, Type-C, 5V Environmental Operating temperature: 0 ~ 50 Storage temperature-20 ~ 70 Relative humidity 5%~95%, Non-condensing Optional Configurations ASD18 Bluetooth Printer Docking Station

Product name: Tetrapeptide-30 Other Name: Tegopep; skin lightening peptide Molecular Formula: C22H40N6O7 Molecular Weight: 500.59 Appearance: White powder Purity: >98% CAS NO.: 1036207-61-0 Package: 10MG/bottle; 1G/bottle; 5G/bottle Tetrapeptide-30 is a new peptide that can balance skin tone.There are a variety of mechanisms for brightening skin tone,including reducing or inhibiting tyrosinase activity, preventing the transfer of melanin to keratinocytes and inhibiting melanocyte activation.Tetrapeptide in skin care to inhibits the up-regulation of matrix metalloproteinase-1 (MMP-1) by skin fibroblasts, which are caused by direct exposure to ultraviolet rays or treatment with an ultraviolet-treated keratinocyte-regulated medium.They are suitable for the treatment of inflammatory skin diseases and as active ingredients in skin care products.

INCI Name: FERULIC ACID Molecular Formula: C10H10O4 Molecular Weight: 194.18 Appearance: slightly yellow powder Purity: 98% CAS NO.: 1135-24-6 EINECS No.: 214-490-0 Application: cosmetics and skin care products Supplier: ZHENYIBIO Ferulic acid used in the skin care industry is mainly based on the whitening and antioxidant effects of ferulic acid. Ferulic acid can inhibit or reduce the proliferation activity of melanocytes.A 0.1-0.5% ferulic acid solution can make melanocytes,The quantity is reduced from 117�±23/mm2 to 39�±7/mm2;ferulic acid can also inhibit the activity of tyrosinase.A ferulic acid solution with a concentration of 5mmol/L can inhibit tyrosinase activity as high as 86 %. Even if the concentration of ferulic acid solution is only 0.5mmol/L,its inhibition rate of tyrosinase activity can reach about 35%.Ferulic acid also has the ability to scavenge oxygen free radicals and good anti-oxidation.Ferulic acid has sun protection ability.Ferulic acid can effectively absorb ultraviolet rays in the wavelength range of 290-330nm to prevent or reduce the damage of this wavelength of ultraviolet rays to the skin. Main Function: 1. Ferulic acid can protect skin against sun The chemical black name of ferulic acid is 4-hydroxy 3-methoxycinnamic acid. Among them, the commonly used sunscreen is "Ethylhexyl Methoxycinnamate (OMC)". Therefore, both of the cinnamic acid family, ferulic acid also has the effect of absorbing ultraviolet rays and sunscreen. It is also recognized as one of the sunscreens in Japan. 2. Ferulic acid can resist oxidation Ultraviolet rays will create a variety of free radicals with electrons on our skin, which will cause a series of cell damage and make the skin age down.This is photo-aging.Compared with general sunscreens, ferulic acid can also resist oxidation and eliminate free radicals. 3. Ferulic acid can be anti-inflammatory On the one hand, ferulic acid can cut off the key link in the inhibition of inflammation, such as affecting the metabolism of arachidonic acid, inhibiting the synthesis of prostaglandin PEG2, and can also calm the immune system and reduce the activation of mast cells, which can play an anti-inflammatory and anti-allergic effect. 4. Ferulic acid can whitening skin Tyrosinase is the most critical enzyme needed by melanocytes to produce melanin.Ferulic acid can inhibit the production and activity of tyrosinase,so as to achieve the whitening effect of reducing the production of melanin.

Specifications Engine Type 16-Valve DOHC Direct-Action In-line 4 Displacement 2670 cc Bore x Stroke 94x6.2 mm Recommended Max RPM 5000-6000 Lubrication System Wet Sump Fuel Management EFI Ignition TCI Starter System Electric Alternator Output 12V - 37A with Rectifier Regulator Operation Method Remote Control Trim & Tilt Method Power Trim & Tilt Digital Network Gauges with Fuel Management Standard Gear Ratio 2.00:1 OEDA Emission Rating ???? Scavenging Double Overhead Camshaft Fuel Management EFI Oil Pan Capacity (litres) 5.8 Spark Plug LFR5A-11 Gear Shift F-N-R Exhaust system Through Propeller Hub (Jet) Prop. Engagement Spline

Specifications Engine Type 16-Valve DOHC Direct-Action In-line 4 Displacement 2670 cc Bore x Stroke 94x6.2 mm Recommended Max RPM 5000-6000 Lubrication System Wet Sump Fuel Management EFI Ignition TCI Starter System Electric Alternator Output 12V - 37A with Rectifier Regulator Operation Method Remote Control Trim & Tilt Method Power Trim & Tilt Digital Network Gauges with Fuel Management Standard Gear Ratio 2.00:1 OEDA Emission Rating ???? Scavenging Double Overhead Camshaft Fuel Management EFI Oil Pan Capacity (litres) 5.8 Spark Plug LFR5A-11 Gear Shift F-N-R Exhaust system Through Propeller Hub (Jet) Prop. Engagement Spline

Type: Outboard Motor Year: Current Model: F40 HP Jet Drive Model Number: F40JEHA Series: Four Stroke Jet Drive HP: 40 Engine Type: 3 Cylinder Displacement: 45.6 ci (747 cc) Borex Stroke: 65 x 75 mm (2.56 x 2.95in) Prop Shaft Horsepower: 30 @ 5500 RPM Compression Ratio: 9.4 RPM Range: 5000-6000 Fuel Induction System: EFI (SOHC) Fuel Type: Unleaded gasoline (minimum pump octane 87) Exhaust: Thru prop Ignition System: TCI Microcomputer CARB Rating: 3-Star Alternator Outputat WOT: 16A Starting System: Electric Lubrication: Wet Sump Oil Capacity: 2.1 quarts Recommended Engine Oil: Yamalube 4M Gear Ratio: Direct Drive Control Type: Tiller Handle Trolling Throttle Adjustment: N/A Cooling: Water, Thermostatic Control Gear Shift: F-N-R Command Link System: No Enhanced Ultimate Corrosion Protection System UCP: Standard Feature Power Trim and Tilt: No Shaft Length: 20 inch Gearcase Rotation: Jet Drive Propeller: Jet Drive Tiller Handle Kit: Optional Freshwater Flush: Yes

Melting point 151-154 C(lit.) Boiling point 265 C100 mm Hg(lit.) Density 1,36 g/cm3 vapor density 5 (vs air) vapor pressure 1 mm Hg ( 159.5 C) refractive index 1.4880 FEMA 2011 | ADIPIC ACID Flash point 385 F storage temp. Store below +30C. solubility methanol: 0.1 g/mL, clear, colorless pka 4.43(at 25) form Solid color White Odor wh. monoclinic prisms, pract. odorless PH 3.74(1 mM solution);3.22(10 mM solution);2.71(100 mM solution); Water Solubility 1.44 g/100 mL (15 C) Merck 14,162 JECFA Number 623 BRN 1209788 Exposure limits ACGIH: TWA 5 mg/m3 Stability Stable. Substances to be avoided include ammonia, strong oxidizing agents. InChIKey WNLRTRBMVRJNCN-UHFFFAOYSA-N LogP 0.09 at 25â?? FDA 21 CFR 184.1009; 582.1009; 175.300; 175.320; 177.1680 Substances Added to Food (formerly EAFUS) ADIPIC ACID SCOGS (Select Committee on GRAS Substances) Adipic acid CAS DataBase Reference 124-04-9(CAS DataBase Reference) EWG's Food Scores 1 FDA UNII 76A0JE0FKJ NIST Chemistry Reference Hexanedioic acid(124-04-9) EPA Substance Registry System Adipic acid (124-04-9)

Grapefruit Essential Oil Pure Citrus Bliss by Aromas Oils Embark on a journey of wellness with Aromas Oils Grapefruit Essential Oil a testament to purity certified by USFDA and WHO As a distinguished Grapefruit Essential Oil Supplier we extend our commitment to quality to customers in the US Canada and worldwide Botanical Elegance Grapefruit scientifically known as Citrus Paradisi graces the earth as an evergreen citrus tree yielding yelloworange fruits with varying tastes from sour to sweet Standing at 1620 feet adorned with shiny dark green leaves and white flowers this tree is native to Mexico Overview of Grapefruit Essential Oil Crafted through the meticulous process of cold pressing from grapefruit peels Grapefruit Essential Oil emanates a delightful citrusy fragrance Renowned for its therapeutic benefits especially in aromatherapy this yellowhued essential oil positively influences the lymphatic system aiding the body in eliminating toxins Grapefruit Essential Oil Uses This versatile oil finds application in Personal care products for its aromatic and wellness properties particularly beneficial for oily skin and scalp Aromatherapy to address concerns like acne cold depression and fatigue Culinary creations enhancing a variety of food and beverages Grapefruit Essential Oil Wholesale Suppliers cater to manufacturers in personal care and F amp B industries providing the oil in bulk Grapefruit Essential Oil Benefits Aids in weight loss by boosting metabolism and reducing appetite Exhibits antibacterial properties eliminating harmful bacteria and germs The invigorating scent alleviates stress and anxiety Enhances blood circulation in the body Blends Well With Grapefruit essential oil harmonizes seamlessly with Lemon Lavender Black Pepper Bergamot Cassia Clove Bud Clary Sage Coriander Fennel Geranium Ginger Eucalyptus Roman Chamomile German Chamomile Cypress and Fennel All these oils provided by grapefruit oil suppliers are available for blending Available Product Variants Explore the refreshing Grapefruit Hydrosol Precautionary Measures As a responsible grapefruit essential oil manufacturer we offer the following insights While generally safe consulting a doctor before use is advisable Phototoxic in nature avoid sun exposure after topical application Storage Instructions Transfer the received essential oil from Aromas Oils in aluminum containers to amber dark glass bottles Ensure storage in cool shaded areas safeguarding the essence from sunlight and heat until expiration Global Presence As a global Grapefruit Essential Oil bulk supplier Aromas Oils delivers to the UK US Canada Australia New Zealand South Korea China Taiwan Thailand Vietnam South Africa France Spain Poland Romania Serbia and more Documents Available on Request Aromas Oils dedicated to transparency provides the following documents upon request Certificate of Analysis CoA Detailed product specifications including color odor and other

Experience the Enchanting Fragrance of Texas Cedarwood with Aromas Oils Indulge in the captivating aroma of Texas Cedarwood Essential Oil from Aromas Oils. This essential oil, carefully bottled, captures the natural essence of Cedarwood trees, offering you an authentic olfactory experience. Botany: Juniperus Mexicana, a coniferous evergreen tree belonging to the Cupressaceae family, is the source of Texas Cedarwood Essential Oil. Standing at 23 feet, this tree features needle-like leaves, a crooked trunk, and branches. The highly scented and durable wood is ideal for various applications, including timber. Overview of Texas Cedarwood Essential Oil:� Extracted from the aromatic wood of Juniperus Mexicana, Texas Cedarwood Essential Oil is renowned for its rich and balsamic fragrance. Its scent bears a resemblance to Virginia Cedarwood Essential Oil. The fresh, sweet, and woody aroma makes it a popular choice in aromatherapy, perfumery, and insect-repelling products. Benefits of Texas Cedarwood Essential Oil:� Explore the various benefits offered by Texas Cedarwood Essential Oil: Relieves stress, anxiety, promotes sound sleep, and soothes the muscles of the nervous system. Its soothing aroma aids in decongesting accumulated phlegm and mucus in the respiratory and nasal tracts. Promotes blood circulation, facilitating the removal of harmful substances from the body. Reduces the production of excess oils on the face and scalp. Blends well with:� Texas Cedarwood Essential Oil complements Clary Sage, Frankincense, Lavender, Neroli, Carrot Seed, Copaiba Balsam, Fir Needle, Patchouli, Spruce Hemlock, Rosemary, and Vetiver oils. Precautionary Measures:� To ensure safe usage, consider the following precautions: If under medical care or pregnant, consult with a healthcare professional before using this oil. Always dilute the oil before application. Not meant for internal use. Botanical Name:� Juniperus Mexicana CAS#:� 68990-83-0 Color & Odor:� Light yellow with a balsamic, woody, clean, dry, and powdery odor F.E.M.A. #:� N/A Methods of Extraction:� Steam Distilled Constituents:� Cedrol and thujopsene Solubility: Soluble in ethanol Specific Gravity: 0.95400 to 0.96700 @ 25.00 C Flash Point: 200.00 F Optical Rotation: +48 to +70 Major Constituents: Cedrol and thujopsene