1. The chemical composition is inert silicon dioxide and there is no worry about the interference of chemical activity;
2, round elastic particles, impact resistance, can be recycled many times, less loss;
3, the spray wear is small, extend the service life of the nozzle;
4, the surface of the ball, will not damage the processing surface and precision size;
5. After treatment, the work-piece surface is smooth, with a special aesthetic feeling, improving the product value;
6. Suitable for dry and wet sand blasting;
7. The fine glass beads used for the metal micro-cracks can be easily displayed after the wet sandblasting;
8, for the processed work-piece with matte effect, highlighting the metal color, not rust and other advantages, no need to carry out pickling derusting treatment.
Micro Glass Beads for sandblasting
Micro Glass Beads are made of hardened spherical soda lime glass and are a multi-faceted and commonly used media. Cost effective, ideal where metal contamination is not allowed, and often used to peen difficult to reach part areas.
Full Description :
ï?·Does not cause dimensional change to the base material
ï?·Environmentally friendlier than chemical treatments
ï?·Leave even, spherical impressions on blasted part surface
ï?·Low breakdown rate
ï?·Lower disposal & maintenance costs
ï?·Soda Lime glass does not release toxins (no free silica)
ï?·Suitable for pressure, suction, wet and dry blasting equipment
ï?·Will not contaminate or leave residue on work pieces
Advantage of SICHENG Glass Beads
1. The chemical composition is inert silicon dioxide and there is no worry about the interference of chemical activity;
2, round elastic particles, impact resistance, can be recycled many times, less loss;
3, the spray wear is small, extend the service life of the nozzle;
4, the surface of the ball, will not damage the processing surface and precision size;
5. After treatment, the work-piece surface is smooth, with a special aesthetic feeling, improving the product value;
648 Glass Beads Suppliers
Short on time? Let Glass Beads sellers contact you.
Glass beads are made of broken glass, flat glass and other raw materials by high temperature melting bead processing. Low thermal conductivity, high strength, good chemical stability, and the texture of glass beads themselves, glass beads instead of plastic raw materials are widely used in filling, such as gravity blanket filling, compression filling, medical filling, weighted blanket filling, toy filling and so on.
1,Road making,ã??airport road marking;
2,Fillers for various insulation and sound insulation products;
3,Enhance stress corrosion resistance. For example, aircraft engine turbo, vane, shaft, undercarriage, diversified springs and gears, etc
4,provide brightness for medical mechanical instruments and automobile parts
5,Be used for reflective safety clothing to improve safetyã??
1. The chemical composition is inert silicon dioxide and there is no worry about the interference of chemical activity;
2, round elastic particles, impact resistance, can be recycled many times, less loss;
3, the spray wear is small, extend the service life of the nozzle;
4, the surface of the ball, will not damage the processing surface and precision size;
5. After treatment, the work-piece surface is smooth, with a special aesthetic feeling, improving the product value;
6. Suitable for dry and wet sand blasting;
7. The fine glass beads used for the metal micro-cracks can be easily displayed after the wet sandblasting;
8, for the processed work-piece with matte effect, highlighting the metal color, not rust and other advantages, no need to carry out pickling derusting treatment.
1,Road making,ã??airport road marking;
2,Fillers for various insulation and sound insulation products;
3,Enhance stress corrosion resistance. For example, aircraft engine turbo, vane, shaft, undercarriage, diversified springs and gears, etc
4,provide brightness for medical mechanical instruments and automobile parts
5,Be used for reflective safety clothing to improve safetyã??
China factory supply Abrasive glass beads media
Product Description
Glass beads are made of broken glass, flat glass and other raw materials by high temperature melting bead processing. Low thermal conductivity, high strength, good chemical stability, and the texture of glass beads themselves, glass beads instead of plastic raw materials are widely used in filling, such as gravity blanket filling, compression filling, medical filling, weighted blanket filling, toy filling and so on.
glassbeads5.png
Advantage
1. The chemical composition is inert silicon dioxide and there is no worry about the interference of chemical activity;
2, round elastic particles, impact resistance, can be recycled many times, less loss;
3, the spray wear is small, extend the service life of the nozzle;
4, the surface of the ball, will not damage the processing surface and precision size;
5. After treatment, the work-piece surface is smooth, with a special aesthetic feeling, improving the product value;
6. Suitable for dry and wet sand blasting;
7. The fine glass beads used for the metal micro-cracks can be easily displayed after the wet sandblasting;
8, for the processed work-piece with matte effect, highlighting the metal color, not rust and other advantages, no need to carry out pickling derusting treatment.
Application
1,Road making, airport road marking;
2,Fillers for various insulation and sound insulation products;
3,Enhance stress corrosion resistance. For example, aircraft engine turbo, vane, shaft, undercarriage, diversified springs and gears, etc
4,provide brightness for medical mechanical instruments and automobile parts
5,Be used for reflective safety clothing to improve safe
Our products win the good reputation in the international market for the superior quality and competitive price.
Reflective glass beads for road marking is one of most popular products, all types are available in our company, such as BS6088A/B, EN1423 /EN1424, AASHTO M247 type1/2/3, KSL2521 No.1/2, JIS R3301, etc. And also we can produce the glass beads according to the client's specification.
Use
High refractive index glass beads use in road marking paint, road board, road sigh, clothes &bags, reflective sheeting ^it provides excellent night retro-reflectivity.
Size
Index1.93 uncoated & coated
From10 micron to 1200 micron
We are iso 9001:2008 company, all of our products can pass heavy metal testing.
We have bs en 1424, 1423; bs 6088 class a, classb; aashto type i, type ii glass bead for road marking
Package in 1200kg bulk bags or 25kg bags
648 Glass Beads Suppliers
Short on time? Let Glass Beads sellers contact you.
