Product origin : Nigeria Key Specifications/Special Features : Diameter- 3.5-4.5cm Length- 15-40cm No hair (No fibers) No fingers (branches) Very smooth body with no sand (if at all it should be very minimal) No injury (if at all it should be very minimal) Not too big (enough for a family to eat at once)
APPEARANCE: The color is a light cream with darker heartwood, something between maple and ash. The grain is short, mostly straight, with beautiful, even texture. Beechwood imparts definite warmth to the environment and can make the interior look spacious. Furniture manufacturers and cabinet makers figured out the trick for quite a while; thatâ??s one reason many pieces of furniture designed for small habitats such as apartments or flats are often veneered with beech wood. European Beechwood PHYSICAL PROPERTIES: Dense, heavy, and hard (1300 on the Janka scale) yet somewhat brittle due to its short grain. Not having any specific taste or odor and being very gentle on the knifeâ??s edge, it becomes an obvious choice of cutting boards, chopping blocks, and butcher-block countertops. The unfinished wood has poor dimensional stability, as it reacts promptly to the changes in the environmental humidity. It is, therefore, necessary for the wood to be sealed with great care before installation. European Beechwood WORKING PROPERTIES: Beechwood machines very well and has exceptional stain acceptance. Being a dense wood, it tends to split along the grain, so pre-drilling is a must for nails and wood screws. European Beechwood TRIVIA: Although beech wood is not very durable outdoors, its durability increases when soaked continuously. Thatâ??s why beech wood came as the right candidate for building water wheels and underwater ship elements when white oak or other traditional water-resistant timber was not available.
European Redwood (Red Deal)  Pinus sylvestris European Redwood (Red Deal) is used for general joinery and our Sykes Grade 1 is highly sought after for quality softwood work. Origin â?? Scandinavia/Russia Availability â?? Square edged kiln dried boards Grade â?? Sykes Grade 1 and Sykes Grade 2 Colour â?? Pale yellow to light brown Usage â?? Joinery �· Furniture Durability â?? Non-durable Density â?? 510 kg/m3 Movement in Service â?? Medium Thicknesses Available â?? 19mm, 25mm, 32mm, 38mm, 50mm, 63mm, 75mm & 100mm Specification â?? 100mm & wider, 1.8m & longer Basic Price Level Low Summary General purpose softwood. Sykes Grade is specially produced for us, each board bearing our name.
We are global suppliers of quality Teakwood Logs, squares and lumbers. Teak wood is one of the highest quality available hardwoods today. Its natural properties make it resistant to weather variations. Exposure to sun and rain do not damage teak as they would damage other types of wood. Our teak wood, especially, comes from legal origin and high quality forest management. Logs They come from thinning and final cuts, sold with different specifications for the sawmills of the region and exported to the whole world. Logs can be used in the creation of rustic outdoor and indoor furniture, pillars, veneer and even masts of ships. After to be processed in a sawmill into planks and lumber can be applied for all kind of teak uses. After all, thanks to its high resistance to moisture, teak is widely used in shipbuilding. Lumber Sawn lumber is produced on its own sawmill, which allows us to offer saws cuts of different specifications, according to the customerâ??s needs. It is ideal for the manufacture of furniture, floorings, decks, wooden artifacts and decorative items in general. Squares The squares are produced in the sawmills with an internationally recognized liability standard. It is possible to find squares of teak being used in construction for doors, windows frames, in the composition of decks, floorings and fancy furniture. The high durability of teak wood provides an excellent cost-benefit to the final consumer. We equally have the following species of wood available... IROKO,SAPELLI,OKAN,AZOBE ,IROKO , TALI,FARO,MOVINGUI,BOSSE,AIELE,ZINGANA,EBENE,AYOUS,TEAK,WENGUE,KOSSIPO , ,
Chess set of wood - Piece of wood
Kd 10+-2% mc Thickness: 25-26-32-38 mm Widths: 100 mm and wider Lengths: 2000 mm and longer Quality: a/b grade
Kd 10+-2% mc Thickness: 25-26-32-38-50 mm Widths: 100 mm and wider Lengths: 2000 mm and longer Quality: a/b grade
Dimension of sliding table ,3000*375mm Gross cut capacity,3000mm Width of cut between saw blade and ripe fence,1250mm Saw blade,300mm (250-300) Height of cut 300mm,70mm Speed of main saw blade,6000r.p.m Tiling saw blade,0-45 Degree Main motor,4kw Scoring saw blade diameter,120*20mm Speed of scoring saw blade diameter,8000r/min Scoring motor,0.75kw Net weight,790kg Overall dimensions,3000*3150*900mm Weight 790kg Dimensions 3000*375mm
Material: hdf Density:+950kg/m3 Door skin width: 660/740/840/920/1020mm Height: 2150mm Surface: natural wood veneer, melamine, enamel paint or plain door skin. We supply hdf moulded door skins, door panels, many designs to choose, with natural wood veneer, melamine finish, painted, with grains. Thickness 3.0 to 4.5mm, width of panel upto 1020. In natural wood veneer : sapele, mahogany, teak, golden teak, walnut. Wenge, black walnut, rosewood, oak, chinese oak, red white oak. Cherry, makore. Many of these veneers can be supplied with engineered veneered surface
We supply: 1. Okume face and Okume back ,hardwood, Combi core MR-AA Grade Face,AA Grade Back in thickness 9mm,12mm,18mm 2.Okume Face and Canarium Back, hardwood combi core MR- A Grade Face , A Grade Back in thickness 9mm,12mm,18mm 3.Okume Face and Okume Back, Eucalyptus core MR+15% Melamine- AA Grade Face , AA Grade Back in thickness 9mm,12mm,18mm 4. Okume Face and Canarium Back, Eucalyptus core MR+15% Melamine - A Grade Face , BGrade Back in thickness 9mm,12mm,18mm We also can do plywood as per customer requirement.
We supply Film Faced Plywood ( Shuttering Plywood) with Original Dynea film red brown, brown film (40/128 grade), 30kg, densified Film Faced (15mm to 12mm),11 ply, 12mm thickness (+/- .5mm), 10-15times repetition, 72Hours WBP Glue (Phenol Formaldehyde). Hot press-40minute heating and cooling cycle. Rubber wood + Poly core: 30Kg: Rubber wood + Full core: 30Kg: Eucalyptus + Full core: 38Kg: Benefits: more usages, more load bearing, less scaffolding, save on labor cost. Origin: India, China