Two sided planer:
In the field of woodworking, for wider double side processing, we would like to provide you except the sanding machine another choice-1020 m/m (40!¡l) gtm-1020w
Double surface planer.
For ensure the smoothly processing, series gtm-1020w is designed supplely the feed- in from tip plug, and multi-spindle power transports feed-out. Our durable spiral cutter can cut woods in low noise and not easy to cause a stain on woods.
Gtm-1020w could complete double surface processing at one time with fast feeding (7m ~ 20 m/min). For the clamp board width within 1m, the light sanding after double side planning could reach the effect of one side sanding and one side surfacing.
Gtm-1020w contains several special parts that the traditional double side planer lacked, plus decades of professional planer machine produce experience to design and manufacture reliable products, no doubt that !¡±gtm-1020w!¡l will be your best choice!
Please visit our web site for more information.
Price, moq, deliver time are negotiable, please contact us for correct quotation and product details.
Planer
Plate dimensions400 x 2300 mm
Front plate length 1110 mm
Rear license plate size 1110 mm
Max. Planing length 18 mm
Trench slope angle0-45
Blade qty 4
Top spindle speed 4000 rev / min
Top shaft diameter 105 mm
Saw tray
Plate dimensions 550 x 800 mm
Circular saw blade diameter 350-400 mm
Shaft diameter 30 mm
Tray spindle speed 3600
Drill
Plate dimensions 270 x 480 mm
Longitudinal motion 170 mm
Transversely action 135 mm
Vertical movement 160 mm
Drill diameter 20 mm
Machine
Motor force 4 hp
Dead weight 850 kg.
High frequency vacuum dryer is smaller type fast dryer, suitable for hard or thick wood drying, it is a best choice for hard wood furniture company.
High frequency dryer applies both high frequency and vacuum condition.
1.Character:
High frequency heating: high frequency power acts only on the moisture of the wood, it penetrates the wood and where there is water or moisture, there is high frequency power.
So it dries: fast and uniform
Vacuum condition:
At vacuum condition, the water is vapor at very low temperature, so this eliminate the problem of sparking or splitting problem for hard wood, especially for the type of extremely hard wood that likely to spark if drying temperature is too high.
Further more , vacuum condition create a minus pressure in the tank, this minus pressure suck the water or moisture out of the wood fast
2 sagas high frequency dryer is plc automatically controlled , high frequency and vacuum pump is start and puse automatically during drying, water come out of the wood is automatically released by water control system to a water holding tank. Weight calculating system get the data of weight change of the wood, by this, the moisture content with-in the wood is readable. Very precise fiber glass(optical fiber) temperature sensor make sure the wood drying at right temperature to eliminate any chance of split or spark on the wood.
Plastic and foam, seaworthy package
Dimensions of tank: 1300mm
Gross weight:9400kgs
Danyang dingjian tools co., ltd. Was founded in 1991 and is located in danyang city, one of the biggest manufacturing base for cutting tools in china. As a leading professional cutting tools supplier in china, our main products include drill bits, saw blades, hole saws, tool bits, screws, shovel, wrench, reamers and other cutting tools,
We has a batch of skilled workers, experienced technicians and senior engineers. We also introduce advanced automatic equipment for research, development and manufacture. Meanwhile, we are punctilious in pursuit of raw materials, process of manufacture and test of quality, trying our best to reduce the cost and supply customers with high-quality products at low prices.
We have been supplying quality tools and accessories for trading and construction companies for years. There is no service we do not bend our backs to perform. We have created a reputation in our field as a company which can compete in quality, price along with timely delivery.
For the last we know the needs of our customers and therefore work hard to fulfill their requirement and to see that they are satisfied. It is our firm belief for our customers that we cannot spell s_ccess without "u".
Dcx 2000 series computerized frame paperboard cutting machine
Max cutting speed 600mm/s
Max moving speed 4500mm/s
Max cutting thickness 3mm
Cutting angle 45/55
Effective cutting range 1200*800mm
Resolution ratio <0.01mm
Cutting precision <0.05mm
Coming with free aokecut software
Applications
1)cutting frame card paper
2) incising of stereoscopic art word
Product characteristics
1)incise the angle to have 45 degree and 55 degree
2)function stability
3)the operation is simple.
Feature:
1.Blade up & down movement by electric control.
2. digital display for saw blade inclination angle(0-45 degree).
3. wide duralumin sliding table.
4. high precision steel guide.
Main technical parameter for MJ61-32TAS.
Dimension of sliding table3200x435mm
Gross cut capacity 3200mm
Width of cut between saw blade and rip fence 1250mm
Saw blade diameter 300mm(250-450mm)
Height of cut (300mm) 80mm
Speed of main saw spindle 4500/6000rpm
Main spindle diameter 30mm
Tilting saw blade 0-45-90°
Main motor 5.5kw 380V , 50HZ, three phases
Scoring saw blade diameter 120mm
Speed of scoring saw blade 8000rpm
Scoring saw diameter 20mm
Scoring motor 1.1kw
weight 950kgs
Overall dimension 3200x2450x900mm.
Max. drilling diameter : 35mm
Max. drilling depth : H max=60mm
Max. processing pitch: 1300x672mm
Min.processing pitch: 130x32mm
Total number of drilling shafts: 63 pcs
Total number of drilling rows: 21x3 rows
Installing dia to the drill: 10mm
Distance between spindle: 1300mm
Working pressure: 0.5~0.6Mpa
Total power of motor: 4.5kw
Spindle speed: 2840rpm
Exterior of machine: 2200x2500x1600mm
Weight of machine: 1400 kgs.
1, Using four-edge knife, easy to use and low cost.
2, Knife plate voltage controlled by the hydraulic control, advanced structure, reliable performance.
3, Feed part adopt stepless speed .It has good peeling effect on the cold wood, curved wood, eucalyptus, oak, elm and other tree species has a good hard.
4, Peeling the net high, high productivity, little injury for the wood.
Model (slwd)150220260300
Max diameter150mm 220mm 260mm 300mm
Knife quantity 4 4 4 4
Main power 4.0kw4.0 kw5.5 kw 5.5 kw
Driving power 1.5 kw1.5 kw1.5 kw1.5 kw.
1, Whole machine welded with seamless steel structure which is stable and durable.
2, There axises of X,Y and Z equip dust cleaner system to prolong life-time.
3, Workpieces can be placed at the stop.
4, It is compatible with the process codes of multiple national and international software.
Technical data:
Machine size : 1440*3040mm
Work envelope : 1300*2500mm
Respositioning resolution : 0.05mm
Resolution : 0.025mm
Power of spindle : 4.5kw
Spindle speed : 1-1800(2400)rpm
Power of horizontal spindle : 6kw
Rotate speed of horizontal spindle : 1-1800rmp
Max.speed : 30m/min
Max.cutting speed : 15m/min
Bridge clearance : 200mm
Working voltage : AC380v/50HZ
Command code : HPGL,Gcode.
e equipment was manufactured by Jeffrey Rader AB, Sweden in 1995 and it is in very good operational condition. It consist of two heavy duty rolls with removable profilied surfaces which rotate towards each other and presses overzised wood chips between the profiles. Roll drives 2 x 110 kW / 1500 rpm connected with two gearboxes. Hydraulic pump 7.5 kW, capacity 220 m3/h wood chips.
The equipment was manufactured by Jeffrey Rader Inc, Sweden in year 1995, manufacturers type is DynaYield 80-300 and it is in good operational condition. The Chip Conditioner consists of two heavy duty rolls with removable profiled surfaces. They rotate towards each other and pull the oversize chips between them. The profiled surfaces are aligned so that the pyramid apexes on one roll travel in the valleys of the apexes on the adjacent roll. With normal oversize wood, the Conditioner typically generates less than 1% fines and 3% pins
The normal application for the Chip Conditioner is in a chemical pulping process, processing the oversize materials by fissuring the wood chips parallel with the grain to allow the cooking liquors to penetrate the chip, and allow the oversize chip to cook as an acceptable size chip. Another application is in a thermo-mechanical pulping process (TMP), as a preconditioning
An important feature of this machine is its ability to handle small portions of tramp without going off-line. With the so called Dynagage Conditioner, the dynamic roll is allowed to move away from the static roll, and once the tramp is through the unit, the roll automatically moves back to the proper set point without shutting down the flow and together with slow rotation speed enable were low down time and maintenance costs. Roll distance movements are made with a hydraulic system build on the equipment and controlled by 3 position sensors
More information on requests, for spam protection please introduce yourself properly.
Technical data:
Model: RDY 80-300
Manufacturing year: 1995
Capacity (throughput): 220 m3/h loose wood chips
Press roll diameter: 915 mm
Roll length: 2440 mm
Roll motors: 2 x 110 kW / 1500 rpm / 690 V – 50Hz
Press distance between the rolls: 2.2 mm
Gearboxes: 2 x Kipo Benzler TV 512
Hydraulic pump: Rexroth 200 bar with Mecman syliders
Electric motor for hydraulic pump: ASEA 7.5 kW
Weight: 33 000 kg
Length: 5083 mm
Width: 2550 mm
Height: 2400 mm.
Technical Specifications :
Exterior size: 5800(Double plate 8800) mm, 1500 mm, 1400mm
Working plate inner size: 2550mm, 1150 1300 mm
(if producing the door, you choose 1150mm;if producing cabinet, you choose 1300mm)
Maximum height of the work piece:50mmincluding height of Magnetic block or bottom plate
Rating working pressure: -0.095Mpa
General Power: 15kw
Actual power consumption: about 5kw
Weight: 2.5T
Top temperature:180.
Technical Specifications :
Exterior size :10030mm, 2230 mm, 2150mm
Working plate size:2580mm, 1270mm inner size Suitable for cabinet, the width of PVC film should be 1400mm
Maximum height of the work piece :50mm including bottom plate
Rating working pressure: Positive pressure 0.6Mpa
Negative pressure : -0.095Mpa
General Power: 65kw
Actual power consumption : About 15kw
Weight :12.6T
Top temperature:150
MHS1560*600 Technicial Specifications:
Characteristics:
Comb tenoning and splicing is an effective way to connect the timbers to a longer length, is able to increase the utility rate of shorter timbers and reduce resources waste. The automatic finger-joint production line features compact structure, rational arrangement, high precision and efficiency, and manpower saving, is widely used timbers processing industry.
Model MXZ3515T
Auto Finger Shaper (Include Glue Spreading) MXZ3515
Auto Finger Shaper MHZ1560
Auto Finger Joint Assembler
Table size (W*L) 850*600mm 850*600mm ----
Max. working size (L*W*H) 850*80*150 850*80*150mm 6200*150*80mm
Min. working size (L*W*H ) 200*30*20mm 200*30*20mm 1000*30*20mm
Shaper spindle diameter 70 mm 70 mm ----
Shaper blade diameter 160 mm 160 mm ----
Main saw blade size 255 mm 255 mm 355 mm
Shaper spindle speed 5000 rpm 5000 rpm ----
Main saw spindle speed 2840 rpm 2840 rpm 3700 rpm
Spreader roller speed 58 rpm ---- ----
Total motor power 17.24 kw 16.12 kw 7.7 kw
Working air pressure 0.8 Mpa 0.8 Mpa 0.8 Mpa
Max. jointing force ---- ---- 7800 kg
Max. production rate ---- ---- 31 m/min.
46486 Wood Raw Material Processed Related Machinery Suppliers
Short on time? Let Wood Raw Material Processed Related Machinery sellers contact you.
