Technical parameters Mz73216
The max drilling diameter 35mm
The max drilling depth 60mm
Vertical distance 130-3250mm
Driller numbers 2axles*6line
Running speed 2840r/min
Motor power 1.5kw*6
Air pressure 6-8kg/cm2
Overall sizeú¿l*w*hú¬ 4600*1500*1600mm
Wood brushing machine
Main uses:
Solid wood grain highlighting, with steel and nylon wire brushes,
Wpc decking profile brushing, with steel and nylon wire brushes
Wood profile polishing and denibbing, with sandpapers
Machine features:
Centralized control panel
Steel wire brush or roller, nylon brush rollers or vertical wire disc, work together or separately
Fine adjustment and digital display of table openings
Hold-down rollers and feed-in table height adjustment
Rotate speed of the brush and feed speed controlled by invertor
Modular configuration
Easy exchange of brushes
Max. Working width include: 600mm; 800mm;1000mm;1300mm;1600mm or others
Working length: more than 400 mm;
This dry type grinding is designed in order to achieve the no.3, no.4, hairline finishing with abrasive belts for metal sheet surfaces grinding or finishing or brushing or polishing (as stainless steel sheet aluminum sheet or coil). Single or multiple abrasive belts of variable grain patterns adaptable.
This kind of machine always work with conveyor bed, precisely up or down on 4 pneumatic spindles, dust extraction funnels.
Max. Working width include: 600mm;800mm;1000mm;1300mm or others
Working length: more than 400mm; working thickness: 0.5-30mm; feed speed: 5-30m/min
The processing of this machine is:
Metal sheet--conveyor bed---grinding machine---conveyors---film laminating machine(laminate protective film on the metal sheet in order to protective the sheet )--metal sheet.
This kind of machine include msrr( two abrasive belt ), msrrr(3 abrasive belt ), msrrb(2 abrasive belt and 1scrotch-brite rollers ) three models. Depend on your sheet roughness and effect you required. You can choice different model..
16 of the ms16rr meaning max width is 1600mm.
13 of ms13rr meaning max width is 1300mm.
Technical parameter
Machine modelms16rrms16rrrms16rrb
Work piecethickness0.5-30mm0.5-30mm0.5-30mm
Maxlength320mm320mm320mm
Width40-1600mm40-1600mm40-1600mm
Abrasive belt linear speedabout 14 m/sabout 14 m/sabout 14 m/s
Size(wxp)1630x1900mm1630x1900mm1630x1900mm
Conveyor beltfeed speed5-20m/min5-20m/min5-20m/min
Size(wxp)about 1600x3350mmabout 1600x4330mmabout 1600x4330mm
Motor
(kw)no.1 main motor30.0kw30.0kw for no.4
2.5kw for hl optional30.0kw
No.2 main motor30.0kw30.0kw
No.3 main motor15.0kw
Feed-in motor4.04.04.0
Lifting motor0.370.370.37
Airconsumption volume about 0.66m3/minabout 0.76m3/minabout 0.76m3/min
Working pressure0.55mpa0.55mpa0.55mpa
Dust exactorwind volume6500 m3/h8500 m3/h8500 m3/h
Pressureabout 2300paabout 2300paabout 2300pa
Wind speed25-30m/s25-30m/s25-30m/s
Sliding table saw
Technical data
Fixed table size mm 1580-800
Fixed table size cut mm 1280
Fixed table from floor mm 850
Carriage diemension mm 680
Lateral table saw mm 1150
Vlade arbor diameter mm 30
Max. Depth of cut mm 250
Blade tilting 45'-90'
Max. Depth of cut mm 65
Motor power hp 4
Motor speed rpm 1500-3000
Blade speed rpm 3000-6000
í= used for plastic and aluminum profile cutting angel between -45 degree, 45 degree, 90 degree. Feeding in a liner way ensured ití»s stability. Machine guide adopted imported linear bearing system, ensured high cutting precision.
Improving the manufacture of saws tapes, vantec launches in the market of woodworking machines bandsaw horizontal ash tape 700mm x 1 ". With rocker system. The function of the rocker is a counterweight in the mountains shake in the steering wheel, ensuring greater durability of the mountain and preventing the breakdown of that without interfering with the stability of the cut.
The dimensions of the width of cut and also the width of the trough will depend on the customer's needs, and 160mm to 220mm, is optional inverter frequency by varying the speed from 0 to 38 mt.Lin / min. As required.
The horizontal band saw 700mm x 1 "has three forward speeds, ensuring better performance of the machine, as well as providing a higher yield, distance between the teeth of 19mm and 1.7mm cut
It has superior traction rollers pressed synchronized with the speed of the treadmill to ensure efficiency in the conduct of timber and established part to be processed. Using a saw blade with a thickness of 0.9mm, working with a rotation of 1.065rpm, bandsaw vol horizontal 700rpm x 1 "guarantees the quality of the cut, the lowest rate of sawdust and uniformity of the gauge.
Dimensions of wood:
Minimum path length---------------------5mm
Maximum height of the block-----------400mm
Minimum length---------------------------400mm
Maximum length---------------------------3.000mm
Equipament:
Ash------------------------------------------700mmx1"
Main engine--------------------------------20cv 2p trif
Engine feed---------------------------------3cv 4p
Maximum width being cut---------------220mm/350mm
Total length---------------------------------5.500mm
Width----------------------------------------2.000mm
Blade:
Saw blade------------------------------------1.1/4"x0.9x4.220mm
Approximate cut----------------------------1.7mm
Feed rate-------------------------------------17-22-32mt/lin/min
Average production head------------------198m2/h
The bandsaw horizontal vol. 700x 1 ", which has three forward speeds, ensuring a better machine performance and provide greater output, the distance between the teeth of 19 mm and cut of 1.7 mm.
It has superior traction rollers pressed synchronized with the speed of the treadmill to ensure efficiency in the conduct of the wood, and the stability of the part to be processed.
Using a saw blade with a thickness of 0.9mm, working with a rotation of 1.065rpm, the horizontal band saw vol 700mm x 1" guarantees the quality of the cut, the lower index of sawdust and uniformity of the gauge.
Dimensions of wood:
Minimum path length---------------------5mm
Maximum height of the block-------------400mm
Minimum length--------------------------1.000mm
Maximum length--------------------------3.000mm
Equipament:
Ash-----------------------------------700mmx1"
Main engine---------------------------20cv 2p trif
Engine feed---------------------------3cv 4p
Maximum width being cut---------------220mm
Total length--------------------------8.000mm
Width---------------------------------2.000mm
Improving the manufacture of saws tapes, vantec launches in the market of woodworking machines bandsaw horizontal ash tape 700mm x 1 ". With rocker system. The function of the rocker is a counterweight in the mountains shake in the steering wheel, ensuring greater durability of the mountain and preventing the breakdown of that without interfering with the stability of the cut.
The dimensions of the width of cut and also the width of the trough will depend on the customer's needs, and 160mm to 220mm, is optional inverter frequency by varying the speed from 0 to 38 mt.Lin / min. As required.
The horizontal band saw 700mm x 1 "has three forward speeds, ensuring better performance of the machine, as well as providing a higher yield, distance between the teeth of 19mm and 1.7mm cut
It has superior traction rollers pressed synchronized with the speed of the treadmill to ensure efficiency in the conduct of timber and established part to be processed. Using a saw blade with a thickness of 0.9mm, working with a rotation of 1.065rpm, bandsaw vol horizontal 700rpm x 1 "guarantees the quality of the cut, the lowest rate of sawdust and uniformity of the gauge.
Dimensions of wood:
Minimum path length---------------------5mm
Maximum height of the block-----------400mm
Minimum length---------------------------400mm
Maximum length---------------------------3.000mm
Equipament:
Ash------------------------------------------700mmx1"
Main engine--------------------------------20cv 2p trif
Engine feed---------------------------------3cv 4p
Maximum width being cut---------------220mm/350mm
Total length---------------------------------5.500mm
Width----------------------------------------2.000mm
Blade:
Saw blade------------------------------------1.1/4"x0.9x4.220mm
Approximate cut----------------------------1.7mm
Feed rate-------------------------------------17-22-32mt/lin/min
Average production head------------------198m2/h
In order to bring more and more advantages and provide equipment to increase their profits on cost-efficient, the vantec presents saw tape vol horizontal 800mm x 1 ". Equipped with hydro-pneumatic tensioner, which intends to allow the saw according to their characteristics, keeping the tension constant and unchanged, has a compensating valve to correct excesses in abnormal states, and also has the function to facilitate the replacement of the saw.
With feeding belt loop of steel, and frequency inverter drive panel. The fact that the machine has 800mm wheels provides better performance. His super reinforced structure ensures maximum shelf-life and results that will surprise you.
Dimensions of wood: 1cab
Minimum path length-------------------5mm
Maximum height of the block-----------315mm
Minimum length------------------------1.000mm
Maximum length------------------------3.000mm
Equipament:
Main engine---------------------------25cv 4p trif
Engine feed---------------------------3cv 4p
Maximum width being cut---------------220mm/350mm
Total length--------------------------5.157mm
Width---------------------------------2.422mm
Blade:
Saw blade------------------1.1/4" x 0.9 x 5.330mm
Approximate cut------------1.7mm
Feed rate------------------0 a 45mt/lin/min
Dimensions of wood: 2 cab
Minimum path length-------------------5mm
Maximum height of the block-----------315mm
Minimum length------------------------1.000mm
Maximum length------------------------3.000mm
Dimension of sliding table 3200ß370mm
Cross cut capacity 3200mm
Width of cut between saw blade and rip fence 1250mm
Saw bladeª¦ 300mm(ª¦250-ª¦300)
Height of cutª¦300mm 80mm
Height of cut with saw blade ª¦300mm at 45 55mm
Speed of main saw blade 4000/6000rpm
Spindle diameter 30mm
Tilting saw blade 0-45
Main motor 4kw
Scoring saw blade 120mm
Speed of scoring saw blade 8000rpm
Spindle of scoring saw 20mm
Scoring motor 0.75kw
Weight 700kg
Overall dimensions 3250ß3050ß900mm
Dimension of sliding table 3000íß370mm
Cross cut capacity 3000mm
Width of cut between saw blade and rip fence 1250mm
Saw bladeª¦ 300mm(ª¦250-ª¦300)
Height of cutª¦300mm 80mm
Height of cut with saw blade ª¦300mm at 45íp55mm
Speed of main saw blade 4000/6000rpm
Spindle diameter 30mm
Tilting saw blade 0-45íp
Main motor 4kw
Scoring saw blade 120mm
Speed of scoring saw blade 8000rpm
Spindle of scoring saw 20mm
Scoring motor 0.75kw
Weight 700kg
Overall dimensions 3050íß3050íß900mm
The chippers can be used to cut logs, branches, slab, waste veneer, bamboo, cotton stalks, and other non-wood fiber stems into dimensional chips which are the essential material for the production of particle board, fiberboard and paper pulp.
The chippers, boasting advanced structure and wide adaptability, can produce chips of high quality. They are easy to operate and maintain.
The chipper is made up of machine base, rotor, upper and lower feed roller, feed belt conveyor, hydraulic system, etc.
This series of machine can produce chips of high quality. They can be used in paper mill, particle board plant, fiberboard plant and chip production bases. They can cut logs and small wood into high quality chips with even length, smooth chip cut and uniform chip thickness. They can also cut branches and slabs.
This chipper consists of frame, knife disc, feed and discharge spout, case and electrical control system, etc.
The chips length is adjustable in accordance with the requirement of the paper pulp, particle board and fiber board industries.
Compact in structure, easy to operate, high capacity, excellent production and low energy consumption, which make the machine the ideal equipment for chip production industries.
Knife Ring Flaker is one of the main equipments in the preparation workshop section of particle producing. It takes wood chips, bamboo chips, broken veneer as raw materials and cut them into particles of certain thickness(0.25-0.4 mm),which is the raw material of particleboard.
The machine is made up of machine base, rotor, impeller, magnetic separation, separation, weight separation, vibrating feeder, hydraulic system, and brake system, etc. In addition, it has some assist devices such as knife grinding adjustment devices.
After removing iron and non-ferrous impurities, the chips are delivered into the cutting chamber and are made into particles at the 60m / s cutting speed. The particle thickness is controlled by the outer knife. By reducing the length of the outer knife, the machine can be used for preparation of homogeneous particleboard wood shavings.
Drum re-chipper can chip the large wood sheet, waste veneer, and the bark into small sheets as the raw materials of wood based panels or fuel. It also can be used to cut shredded paper and cardboard, and also can be used to crumble plant straw cellulose, such as cotton stalks, bags, waste flax, jute shank, and wild couch grass and straw, which can be the raw materials of particle board or press board.
Screen ring wood grinding machine is used to grind particles made by flakers into fine particles, which is the surface material of particleboard. It polishes wood shaving into fine particles of certain technical requirements.
It consists of machine base, grinding sieve ring, impeller, vibrating feeder, magnetic separation, and separator, etc.
The quality of the blade for various wood machining, wooden products manufacturing is very important. According to the need of wood machining, our company has developed new technics for various materials machining and blades manufacturing, especially for rotary cutter and surfacer knife for veneer machining. By using new material, new technics, this blade has the characters of impact resistance, wear resistance, long-term sharpness and convenient maintenance, deeply loved by users both in home and oversea.
47505 Wood Raw Material Processed Related Machinery Suppliers
Short on time? Let Wood Raw Material Processed Related Machinery sellers contact you.
