Find Verified Wires Cables Suppliers, Manufacturers and Wholesalers

1.Conductor
Plain annealed copper or aluminum
2.Insulation
General purpose pvc compound
3.Colour of cores
Single core - red or black
2 cores - red and black
3 cores - red, yellow and blue
4 cores - red, yellow, blue and black
4. Formation
1) single core
2) 2, 3, or 4 cores - stranded together and the interstices may be filled with the sheathing compound or textile. A nonhygroscopic binder tape may be applied over the laid-up cores.
5.Bedding
Black general purpose pvc compound
6.Armour
Single core - aluminum wire
2, 3, or 4 cores - galvanized steel wire
7.Sheath
Black general purpose pvc compound

Capacity:2000km/month
Light weight
High flexibility enables perfect bending properties
Resistance to temperature
Resistance to adverse
Environmental situations and low cost .
Standard: iec60502-1 , vde 0276-603, icea s-95-658 , as/nzs 5000.1
Voltage: 0.6/1kv

Power cables for energy supply are used for industry and distribution boards, power stations, house connecting boxes and street lighting
Overall, where increased electrical and also mechanical protection are required. Those cables are installed in open air, in underground, in water, indoors and in cable ducts.

PVC Insulated Power Cable

1. Material: low carbon steel wire, galvanized iron wire, stainless steel wire, pvc coated wire
2. Surface treatment: galvanized before weaving, galvanized after weaving

3.Specifications:


Panel size(hxl): 2100x2400mm, 1800x2400mm, 1800x2500mm,
2100x2900mm, 2100x3300mm
Wire diameter : 3.5mm, 4.0mm, 4.5mm, 5.0mm (normal 4.00mm)
Frame pipe: 32mm o.D, 38mm o.D, 42mm o.D, 48mm o.D
(2.0mm thickness)
Mesh size: 50 x 150mm, 75x150mm, 60 x 150mm etc.
Characteristics : uv resistance, weather resistance, easily install , durable, beautiful appearance , bright comfort feeling , wiew widely .

4.Accessories:
Flat iron : support
Brace band :link tensioner & post
Tension band : link the flat iron & post
Tensioner : secure the line wire chain link fence
Line wire : folding the chain link mesh
Tie wire & stirrup wire :secure the line wire & post and secure the post and the mesh

5.Applications:
Commercial grounds (corporation, hotel, supermarket);
Private grounds (courtyard, villadom);
Public grounds (park, zoo, train or bus station, lawn);
Road and transit (highway, railway or road city transit);
Chain link fence is used as fencing, decoration or protection for various facilities in industry, agriculture, infrastructure, transport, etc.

6.Packing:
Normally each roll packed in water proof paper, then in termo foil (shrinked plastic)

1. Material: low carbon steel wire, galvanized iron wire, stainless steel wire, pvc coated wire
2. Surface treatment: galvanized before weaving, galvanized after weaving

3.Specifications:


Panel size(hxl): 2100x2400mm, 1800x2400mm, 1800x2500mm,
2100x2900mm, 2100x3300mm
Wire diameter : 3.5mm, 4.0mm, 4.5mm, 5.0mm (normal 4.00mm)
Frame pipe: 32mm o.D, 38mm o.D, 42mm o.D, 48mm o.D
(2.0mm thickness)
Mesh size: 50 x 150mm, 75x150mm, 60 x 150mm etc.
Characteristics : uv resistance, weather resistance, easily install , durable, beautiful appearance , bright comfort feeling , wiew widely .

4.Accessories:
Flat iron : support
Brace band :link tensioner & post
Tension band : link the flat iron & post
Tensioner : secure the line wire chain link fence
Line wire : folding the chain link mesh
Tie wire & stirrup wire :secure the line wire & post and secure the post and the mesh

5.Applications:
Commercial grounds (corporation, hotel, supermarket)
Private grounds (courtyard, villadom)
Public grounds (park, zoo, train or bus station, lawn)
Road and transit (highway, railway or road city transit)
Chain link fence is used as fencing, decoration or protection for various facilities in industry, agriculture, infrastructure, transport, etc.

6.Packing:
Normally each roll packed in water proof paper, then in termo foil (shrinked plastic)

1. Material: low carbon steel wire, galvanized iron wire, stainless steel wire, pvc coated wire
2. Surface treatment: galvanized before weaving, galvanized after weaving

3.Specifications:


Panel size(hxl): 2100x2400mm, 1800x2400mm, 1800x2500mm,
2100x2900mm, 2100x3300mm
Wire diameter : 3.5mm, 4.0mm, 4.5mm, 5.0mm (normal 4.00mm)
Frame pipe: 32mm o.D, 38mm o.D, 42mm o.D, 48mm o.D
(2.0mm thickness)
Mesh size: 50 x 150mm, 75x150mm, 60 x 150mm etc.
Characteristics : uv resistance, weather resistance, easily install , durable, beautiful appearance , bright comfort feeling , wiew widely .

4.Accessories:
Flat iron : support
Brace band :link tensioner & post
Tension band : link the flat iron & post
Tensioner : secure the line wire chain link fence
Line wire : folding the chain link mesh
Tie wire & stirrup wire :secure the line wire & post and secure the post and the mesh

5.Applications:
Commercial grounds (corporation, hotel, supermarket)
Private grounds (courtyard, villadom)
Public grounds (park, zoo, train or bus station, lawn)
Road and transit (highway, railway or road city transit)
Chain link fence is used as fencing, decoration or protection for various facilities in industry, agriculture, infrastructure, transport, etc.

6.Packing:
Normally each roll packed in water proof paper, then in termo foil (shrinked plastic)

Factory Direct Drop Cable, high quality with most competitive prices.

Your partner of FTTH project.

Recommended laying methods:
Drop Cable used in access networks or as access cable from outdoor to indoor in customer premises networks




Drop Cable Structure characters:

Good mechanical and environmental characteristics
Drop Cable 's Flame retardant characteristics meet the requirements of relevant standard
The mechanical characteristics meet the requirements of relevant standard
Soft, flexible, easy to lay and splice and with big capacity data transmission
Meets various requirements of market and clients




Drop Cable should be used 
Used in the access network or CPN introduced into the room from the outside cable 
Integrated wiring in buildings used for the introduction of cable, especially when the introduction of indoor or outdoor overhead wiring 

Drop Cable Features 
Has good mechanical and environmental performance 
Flame (or retardant) performance to meet the standards 
Sheath of the mechanical and physical properties to meet the relevant standards 
Easy installation, flexible, convenient connecting and supporting high-capacity data transmission 
Meet market and user demands 

Drop Cable Customization
Fiber types: Single-mode G. 652 or G. 655 or G657fiber, A1a or A1b multimode fiber, or other models and types of fiber 
Jacket material: Flame-retardant polyvinyl chloride (PVC), smoke halogen (LSZH), polyurethane (TPU) or other agreed material 
Jacket Color: (including fiber optic cable in color) the color of the standard requirements, but also other agreed upon color 
Cable Size: Nominal fiber size, but also other agreed size 
Delivery length: 1km or 2km, but also other agreed length 
Other requirements: Other special requirements agreed

We are Woven Wire Mesh factory for export more than 30 years.
We can offer the good quality, good price, good payment term, good loading time and good after-sales service.

We can do these size, as below:
Materials: 304 , 316, Copper, Bronze, Brass, steel galvanized etc.
Weaving: Plain weaving, Twilled weaving, Plain duct weave, Twilled duct weave, Reversed plain dutch weave, Reversed twilled weave, Five-heddle weave.
Mesh width: 0.003---10.70mm
Roll width: up to 6.0m

We are Woven Wire Mesh factory for export more than 30 years.
We can offer the good quality, good price, good payment term, good loading time and good after-sales service.

We can do these size, as below:
Materials: 304 , 316, Copper, Bronze, Brass, steel galvanized etc.
Weaving: Plain weaving, Twilled weaving, Plain duct weave, Twilled duct weave, Reversed plain dutch weave, Reversed twilled weave, Five-heddle weave.
Mesh width: 0.003---10.70mm
Roll width: up to 6.0m

We are Woven Wire Mesh factory for export more than 30 years.
We can offer the good quality, good price, good payment term, good loading time and good after-sales service.

We can do these size, as below:
Materials: 304 , 316, Copper, Bronze, Brass, steel galvanized etc.
Weaving: Plain weaving, Twilled weaving, Plain duct weave, Twilled duct weave, Reversed plain dutch weave, Reversed twilled weave, Five-heddle weave.
Mesh width: 0.003---10.70mm
Roll width: up to 6.0m

Voltage
2KV

Construction
Sino cables type RHH/RHW-2 2kv is AA-8000 series Aluminum Alloy, compact stranded. Insulation is abrasion, moisture, heat, and sunlight resistant and fire retardant cross-linked polyethylene (XLP).
Standard
UL44; NEC article 690; ICEA S-95-685/NEMA WC70, or other standards required by customers.
Applications
1.Sino cables type RHH/RHW-2 2KV is for use from the lower control box at the base of the wind power tower and out to the step-up transformer through conduit.
2.For use in free air, raceways or direct burial in accordance with NEC.
3.Industrial environments where superior insulation toughness and chemical resistance is required.
4.Maximum operating temperature not to exceed 90in wet or dry locations.

Voltage
450/750V or less

Construction
1-core: The copper conductor is insulated with natural rubber and sheathed with natural rubber or chloroprene rubber
multi-core: The copper conductor is insulated with natural rubber. Two to six insulated conductors are cabled together with extruded rubber filler, and sheathed with natural rubber or chloroprene rubber.

Standard
IEC 60245, GB/T 5013, or other standards required by customers.

Features
1.Flexible and reliable.
2.Abrasion, corrosion, high-Heat and oil Resistant.

Applications
Sino cables type rubber cables are suitable for power supply to power appliances, home appliances and movable field electric equipment at 450/750V or less.

Package
Coil, Steel /Wooden Reel ,Wooden Reel or Steel Reel.

Standard:iec502, iec332-3
Voltage:5000v
Capacity:2000km/month
Conductors:annealed (soft) copper, compressed 7 strand
Conductor shield (applied on 5kv):extruded semi-conducting xlpe
Insulation:black xlpe
Sheath (applicable on request):pvc, pe or xlpe

Abrasion, moisture, and heat resistant
Highly flexible
Durable service lifespan
Available in several xlpe insulated versions with pvc, pe or xlpe sheaths

Airport lighting cable is primarily used for series lighting circuits for runways, control systems, and other multi-purpose installations. It can be used for direct burial, conduit, or raceway. These cables are capable of operating continuously at a conductor temperature not in excess of 90°c for normal operation, 130°c for emergency overload conditions, and 250°c for short circuit conditions.
Voltage rating for conductors is 600 volts and 5, 000 volts

Voltage:up to 36kv
Capacity:2000km/month
Conductor:copper, circular stranded compacted, longitudinal water-tight
Conductor screening:extruded semi-conductive compound
Insulation: xlpe
Insulation screening:extruded semi-conductive compound
Screen:copper tapes
Separator:plastic foil
Sheath:pe
Fillers:polypropylene strings
Binder tape
Bedding:polypropylene strings of polyester tape
Armor:galvanized round steel wires
Serving: bituminous compound, hessian tapes, polypropylene strings with colored stripe

Use xlpe and epr for insulation, they are maintenance free.
Cables are supplied without a lead sheath, it make the cable light-weighted.
Simple structure permitting longer delivery length, easy for transportation and laying, small bending radius.
Operation temperature: 90°c, short circuit temperature: 250°c.
Standard: vde, iec and icea

Submarine cables and cables for offshore windparks and platform must be resistant to corrosion and abrasion caused by sea currents, waves as well as human and vegatation attack. At the same time they must be capable of offering a maximum of efficiency over long distances.
Jiapu supplies different types of submarine power cables depending on the specific requirements and site conditions and can include control and fibre optic elements / cables.

Wire Cutting EDM Consumable Hard Brass Wire 0.20mm 0.25mm

This brass wire is widely used in Low Speed one-way walk Wire cut Electrical Discharge Machining Machine, such as Sodick, Fanuc, Charmiller, Mitsubishi, Hitachi etc.

Brass EDM Wire Features:
1. Type: Hard
2. Wire diameter: 0.20mm, 0.25mm
3. Material: CuZn35
4. Alloy or not: Alloy
5. Ultimate strength (N/mm2): 980
6. Conductivity: 22%-25%
7. Talarance: +/-0.001mm
8. Grade: First
9. Fitting machines: All EDM wire cut machines such as Sodick, Fanuc, Charmiller, Mitsubishi
10. Packing: 5kg/spool, 4 spools in a carton box
11. MOQ: 1 box (20Kg)

Our EDM consumables and spare parts range:
EDM brass wire
EDM Zinc coating wire
EDM Moly wire
EDM filter
EDM resin
EDM Rust Remover
EDM Consumables
Wire guide, power feed contact, rollers, water nozzle, belt, discharge cable, etc.
EDM Electrode Tubes
EDM drilling tool
Full range EDM accessories solution!

Brass edm wire, brass wire edm, brass wire, brass wire 0.20, edm brass wire 0.25, edm brass wire, brass wire for wire cut, brass wire consumables, edm wires, brass wire hard, edm brass wire china, brass wire for edm, edm hard brass wire

Qianli Battery Flex Cable For iPhone 11-13 Pro Max battery non-genuine battery warning removal. Qianli Copy Power battery data corrector flex cable for reset iPhone battery health data, remove battery pop up error. Qianli battery flex cable with Copy Power battery programmer for modifying iPhone battery data, restore iPhone battery health information, remove iPhone battery important message, ect.

Note: ONLY ORIGINAL BATTERY FLEX CAN BE USE ON THIS MACHINE.

Features:
1: No pop-ups,no jump Repairing,efficiency correction.
2: Replace the battery core and reset the cycle.
3: Available to correct Detail Status on Software of PC Side.
4: Low power IC Chip, non effect for standby.
5: Aisi flashing assistant or data in green (note: please do not connect to the Aisi flashing tool Before success , otherwise you cannot data in green).
6: Suitable for iPhone 11/11 Pro/11 Pro Max/12/12 Pro/12 Pro Max/12 mini/13/13mini/13 Pro/13 Pro Max.

Relate Accessories: Extenal Battery Flex Cable(Convenient to use, no require for Professional Skill)

If you replace the battery of iPhone XS or above, whether it is a genuine battery or a third-party repair battery, you will see the message "Unable to verify this iPhone has a genuine Apple battery" and "Health information not available for this battery" on the iPhone ( As shown in the figure below), it means that the battery in the device cannot be verified as a genuine product, and the maximum capacity will not display the percentage.

Multi-functional JC V1SE Programmer With Battery Board and Battery board flex cable for iPhone battery replacement repair. JC battery repair tool for removing important messages from the iPhone. JC battery repair flex cable for iPhone 11-13 Pro Max battery health data modification, remove non-genuine battery error after iPhone battery replacement.

Features:
1. Support iPhone 11/11 Pro/ 11 Pro Max /12/ 12 Pro/12 Pro Max/13/13 mini/13 Pro/13 Pro Max battery.
2. It can solve the maintenance problems such as the charging times, battery lifespan, battery code, warning message pop-up.
3. Interlligent and stable: this solution is to connect a third-party flex cable on the original battery board, and modify the data through PRO1000S or V1SE.
4. The core of the solution is to rely on the original battery board, so it does not affect the charging and discharging characteristics of the battery.

Relate Accessories:
Extenal Battery Flex Cable(Convenient to use, no require for Professional Skill)
Built-in Battery Flex Cable(Requires professional Skill,no trace sign after repairing)

If you replace the battery of iPhone XS or above, whether it is a genuine battery or a third-party repair battery, you will see the message "Unable to verify this iPhone has a genuine Apple battery" and "Health information not available for this battery" on the iPhone ( As shown in the figure below), it means that the battery in the device cannot be verified as a genuine product, and the maximum capacity will not display the percentage.

MPO/MTP ®Trunk cables facilitate rapid deployment of high density backbone cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are used to interconnect cassettes, panels or ruggedized MPO/MTP ® Fan Out cables.
MPO/MTP ®Trunk cables are offered in all fiber types as standard 12 to 144 core versions using a compact and rugged MicroCable structure. The compact cables optimize cable-way use and improve airflow.

Snow de-icing cable prevents winter damage to roof, gutters, and downspouts
Provides economical solution to ice backup damage to roof, gutters, and downspouts
Suitable for most roof and gutter configurations
Pre-assembled, easy installation; no maintenance required
Kit includes cable, shingle clips, and cable spacers

Power: 16w/m 5w/ft
Voltage; 110v-240v
Conductor: twin
Thermostat: 6-13 degree
Power line: 2m

12 core lc din rail patch panel 6 lc duplex adapter type

Easy to install and with a compact design, the gigamedia dinfo box allow the user to connect up to 12 fibers.
This box is a real added value that allows mixing fiber ressources with electrical ressources inside industrial cabinets.

Loaded with 6 lc duplex adapters ,
6 sc duplex adapters
6 sc duplex / st hybrid adapters
6 lc duplex adapters
6 lsh (e-2000®) compact adapters
All is available .
Integrated splice holders (fusion splices)
Ip20 protection
2x rear entries (pg 11 cable gland)
Grey color (ral 7035)
Temp range : -40 °c to +70 °c
Dimensions : 37 (w) x 129 (h) x 140 mm
Other configurations on demand

Splice box for support rail , different assembly versions are possible
Removable splice tray with crimp splice holder for up to 24 splices
Easy and quick removal of the splice tray
Fiber reservoir
Cable inlet from top or bottom, straight or angled, with 4 x m20 cable gland
Available unequipped, partly and fully equipped

-

MTP/MPO Micro Cable patch cord facilitate rapid deployment of high density cabling in data centers or other high fiber environments reducing network installation or reconfiguration time and cost.They are offered as standard 12 fibres using a compact and rugged 3.0mm Single Jacket MicroCable structure. The compact cables optimises patch cable-way use and improves the airflow. MTP/MPO MicroCable patchcords are built with highest quality components .Standard MTP/MPO as well low loss Elite versions are offered featuring low insertion loss for demanding high speed networks with critical power budget requirements.

Feature

High quality ferrules
High performance and reliability
12xfiber ferrule MPO/MTP
Provide narrow solution for high density application

Application

Data center infrastructure
Storage area network
Optical switch and router
Emerging 40Gbps and 100Gbps protocols compatible

Capacity:2000ton/month
Prestressed concrete uses much less materials than reinforced concrete: savings can reach 40% of the overall mass longer spans, thinner and lighter parts allow a reduction in number of piles, height of buildings, consumption of energy in freight and handling, therefore co2 emissions.
Low relaxation ensures that no noticeable loss of tension will occur in time, therefore a long lasting compressive force on concrete.
Deviated tension is current in post-tensioned structures, stay-cables and even some prefabrication methods. By strict adherence to manufacturing processes and routine destructive tests, our products exceed standard requirements.
Stress corrosion and hydrogen embrittlement are known to be a threat for high-tensile structural steels, especially in environments containing chlorides.

We manufacture pc strand wire in a 3 or 7-strand configuration in both stress relieved and low relaxation grades. Diameters range from 3/8" (9.53 mm) to .600" (15.24 mm).

Prestressing wire and strands are used in bridges, cryogenic storage, industrial, commercial and residential buildings where safety is critical.