Mechanic W08 Mini Precision Spot Welding Machine Suitable for precision welding of mobile phone electronic components, battery plate replacement, lithium battery nickel sheet, etc.Handheld spot welder with 8 gears adjustable power for precise welding during battery repair
Mechanic W08 portable spot welder uses a high-multiplier lithium battery as the power supply, mainly used for welding of nickel sheets of cylindrical batteries. This W08 DIY soldering machine can be used to solder the battery protection board when replacing the battery.
Features:
W08 3 in 1 spot welding,Burning machine artifact,charging, Micro battery spot welding machine
Precise voltage, meticulous pen tip, eight-speed adjustment, one machine for multiple uses
Suitable for precision welding of mobile phone electronic components, battery plate replacement, lithium battery nickel sheets, etc.
Comply with mobile phone industry standard operating voltage to avoid breakdown of battery cells
Break the precision of the traditional soldering pen, the pen tip is as fine as 0.5MM
Multi-power adjustable output, precise welding
The spot welder turns into a mobile power supply with a capacity of up to 9600MAH
Small size and large capacity battery capacity 9600MAH
USB 5V2.4A output can be used as a power bank
The storage battery Android interface supports welding while charging.
8 gears adjustable welding more accurate and good effect
Temperature control protection, automatic power off after 5 minutes standby
Special pen for spot welding with N times of spot welding
3 in 1 Spot Welding Machine equivalent to getting: battery welding machine burn-in artifact power bank
Sunshine GVM C210 Soldering iron tip for GVM JBC T26 T26D S21 T210 C210 Soldering station. Sunshine GVM C210-I, C210-IS, C210-K soldering iron tips for SMD welding repair.
Features:
1. T210 series heating element
2. 2S tin, rapid temperature rise
3. Put it in and use it right away
4. Multi-layer nano electroplating
C210-K K head
Welding mobile phone SMD multi-pin IC, commonly used drag soldering, etc., is also used for removing glue and tin, and has a wide range of applications.
C210-IS Elbow
The head has a special tip of 0.1mm, which is very suitable for SMD welding under a microscope; it can be used for traditional components; it is suitable for drag soldering of mobile phone motherboards and small chip components.
C210-I pointed tip
The head has a special tip of 0.1mm, which is very suitable for SMD welding under a microscope; it can be used for traditional components; it is suitable for fine electric welding, mobile phone desoldering, and small chip components.
New 8586+ SMD Rework Soldering Station hot air soldering station hot air gun Display Repair Welding Set PCB Desoldering Tool
Feature:
1.SMD Rework Soldering Iron temperatures all can be displayed on the LCD screen.
2.Use PID microcomputer control,warming-up quickly,to the setting temperature only within 3-5 seconds,Use the brushless fan,and long life and low noise.
3.Digital Blue LED display,unique appearance,thickened metal plate, small size, anti-fall, anti-impact.
4.Automatic cooling function for effectively prolonging the heater's life and protecting the hot air gun.
5.Safely remove BGA-IC,keep pins intact,Much more safe and reliable,Blowing PCB will not make it blister
6.Essential product for cell phone repair, laptop repair, circuit boards, etc,Suitable for unsoldering multiple components,such as SOIC CHIP QFP PLCC and BGA etc (especially for flat cables and cable connectors).
7.Applicable for hot contraction heating,depainting,degluing,defrosting,Preheating and rubber soldering and so forth.
AIFEN A902 soldering station with C115 C210 C245 welding handle and iron tips for Mobile Phone PCB Tablet BGA IC repair. 350W AIFEN A902 double welding station with automatic sleep function and compatible with JBC C115 C210 C245 soldering iron tips, very suitable for daily mobile phone electronic components welding repair.
Features:
1. Precision integrated soldering station, double station design, compatible with 115/210/245/470 heating element.
2. The T245 handle is compatible with the C470 series heating core, which is suitable for welding large solder joints and large amounts of tin, improving the applicability of the whole machine.
3. 6 groups of standby temperatures (0, 150, 180, 200, 250, 280) are set to ensure that it is ready to use.
4. The double bracket can adjust the angle up and down to meet more needs.
5. High-power design, 350W rapid heating.
6. The double handle can be used at the same time, and the double handle can be closed independently, which is convenient and quick.
7. Automatic sleep function, the handle is placed on the bracket, it will immediately enter the sleep state, and it will heat up immediately when it is raised.
8. There are 3 sets of memory temperature for each double station, short press for one second to read, long press for three seconds to store.
9. The temperature compensation function automatically compensates the temperature of the soldering iron tip during the soldering process, so that the soldering iron tip is always kept at the set temperature.
10. Temperature calibration, key lock, Celsius and Fahrenheit conversion, buzzer, and other functions.
11. Short-circuit protection function when the machine is short-circuited, it will automatically stop working to protect the machine.
12. C/F conversion, temperature control range:100 C-450 C(212F-842F).
13. The plug-in box is compatible with C245, C210, and C115 soldering iron tips, no need to use other tools, convenient and fast.
14. Press and hold the set button in the A/B area in the working state to enter the temperature calibration page in the A/B area, and use the heating and cooling buttons to adjust the temperature after adjusting the temperature press the sTet button to save and exit.
15. Specially used for mobile phone computer tablet electronic components circuits welding repair.
Sunshine S210 110W Universal Portable Smart Soldering Iron With Universal C210 Series Soldering Tips 2 Seconds to Heat up Smart Sensor Sleep Multifunctional Welding Tool.
Features:
1. Portable 110W high power C210 series soldering iron tips, say goodbye to long-term preheating.
2. The soldering iron stand is designed for sleep, prolong the life of the heating core, save power and worry.
3. Cleaning copper wire ball and a heating core cleaning hole can also place a replacement soldering iron tip to prevent loss and quickly replace it.
4. Lead-free soldering iron head conducts heat quickly, oxidation resistance, easy to tin. Plug and play, 2 seconds disassembly and replacement, convenient and fast.
5. The soldering iron is widely suitable for various chip-level maintenance, PCB manufacturing, mobile phone motherboard flying lead desoldering, etc.
Specification:
Product name: Portable Soldering Iron
Model: S210
Handle size: 195 16 15mm
Line length: About 1350mm
Soldering: iron holder size: 135 72 83mm
Package Size: 207 121 95mm
Input voltage: AC100 240V
The output voltage: DC 15V
Frequency: 50~60HZ
Warming time: 2S
Output peak power: 110W
Inductive sleep: Yes
Display method: LED temperature display
Amaoe AM-208 Large Air Volume Heat Gun Digital Display Welding Rework Soldering Station, Original AMAOE AM-208 Temperature Adjustment Air Gun Desoldering Soldering Station, Cellphone PC Automatic Intelligent BGA SMD Rework Station AMAOE AM-208 for Mobile Phone Maintenance.
Features:
Large power and rapid heating. Noise level less than 45db, LED number (resolving capability is 1).
750W large air volume digital display temperature control hot air gun, digital display temperature control.
Customized fan, brushless spiral air supply, large air output, multi-hole spiral air output, softer and uniform, stable and fast.
USB dual interface power supply, 5V/2A power supply, suitable for multi-scenario purposes, convenient and fast.
CH1, CH2, CH3 channel can set and precisely control.
Automatic cooling system can increase the life of heating element and protect the unit.
Specification:
Model: AM-208
Name: Digital display thermostat hot air gun
Input voltage: 220V
USB output: DC 5V/2A
Airflow type: brushless fan soft wind
Airflow: 20-100, 120L/mini
Air gun power: 750W
Body weight: 1.6kg
Packing weight: 2.3kg
Body volume: 10 20 16cm
110/220V 100W S-998P PN-998 electric vacuum double-pump solder sucker desoldering gun soldering iron, S-998P desoldering gun is very easy for you to desoldering and remove the solder, S-998P desoldering gun device is 2 in 1 soldering / desoldering station, including soldering iron and desoldering vacuum pump.
220V AC 100W 350~450 : S-998P Electric Desoldering Gun Vacuum Pump Solder Sucker. S-998P PN-998P.
Features :
Fast heat up function, heated up to 350 C for one minute a stable working temperature and the instantaneous temperature function, suitable for continuous use
Storage Tin glass tube with heat, easily disassembled for easy cleaning
Enhanced double-pump, suction larger, more easily than tin
Transparent back cover, air pump working at a glance
Design horizontal motor
Pump easy to clean, easy to maintain
High insulation, anti-static
Super longevity printed circuit ceramic heater
Suction greater than 650 mmhg
Suitable for double-sided and multilayer circuit boards
Adjustable constant temperature of 350 450
High power heating with rapid heating function
Stable operating temperature 2 C.
High insulation design in addition to static patent
Horizontally motor design
Dual air pump structure strong suction
Energized minutes
Distribution ST-2091 Deluxe Desoldering gun holder
Transparent back cover air pump work at a glance
The air pump easy to clean and easy maintenance
Product Specification :
Model S-998P
Power supply voltage AC 220V 240V 50Hz
Vacuum pump Dual Diaphragm type
Power consumption 100W
Motor Power 20W
Heat-generating components 80W ceramic heater
Temperature range 350 450
Temperature control accuracy 2
Vacuum degree Greater than 650mmHg
Insulation Resistance 100M
Work Continuous
Circuit control system No interference
NOZZLE specifications 1.2mm
Package List
1pcs x S-998P desoldering gun
2pcs x Cleaner needle
2pcs x Filter
1pcs x Desoldering gun
1pcs x 1.0mm nozzle
QUICK 715 2 in 1 Double-station Intelligent Soldering Station for Phone Motherboard Welding Repair.
Features :
Adopt the latest design concept of QUICK
Quick 2008 air gun and 936A soldering iron combined
Large screen LCD display, thin and light, low power consumption, adjustable brightness
Independent control of temperature and air volume
Encoder adjustment, more intelligent
Digital temperature air volume calibration, more intuitive and convenient
Fast heating hot air gun, quality heat rises rapidly.
Vortex fan built into the handle, efficient heat collection, balanced airflow, long life.
Air gun noise reduction design, the wind is soft and even, low noise, no damage to components.
Fast heating iron, efficient heating, good tinning effect, long life.
Increase transformer, full power select circuit board anti-aging heat dissipation.
High temperature resistant flame retardant environmental protection material, artificial design
Metal magnetic hibernation stand, place the stand automatically magnetic induction hibernation standby, pick up automatically and quickly return to temperature
Small size and strong performance,Multi-purpose
Small temperature difference (plus or minus 5 degrees)
Menu :
Backlight on off
Temperature calibration of air gun soldering iron
Encoder on off
Parameter :
Product Name: 2 in 1 Soldering Station
Model: QUICK 715
Power: 760W
Voltage: 110V 220V 50Hz
Soldering Station Temperature: 100 480
QUICK 881D power intelligent lead-free hot air gun rework station 1300W 200l / min, Quick 881D BGA soldering rework station, professional mobile phone circuit board BGA desoldering tool, 2-IN-1 upgrade version from Quick 856AD hardcover edition + Quick 861DW flagship edition, make your maintenance work more efficient.
SUGON 2020D 700W lead-free hot air gun soldering station for mobile phone desoldering repair, 110/220V heat gun soldering rework station for phone PCB SMD chip repair
Product Features :
Sensors, closed circuit, the zero passage trigger temperature control of the microcomputer, LED display, big power, heating is rapid, accurate and stable temperature, not affected by the air volume, truly lead-free desoldering.
Adjustable air flow, air volume big and soft wind, temperature control is convenient, can be suitable for a variety of purposes.
The handle is equipped with induction switch, as long as the hand shake hands handle, the system can quickly enter the working mode; Handle is released into the handle frame, the system will enter the standby mode, easy to operate in real time.
The system is equipped with automatic air cooling function, can prolong the life of heating element and protect the heat gun.
Adopts brushless fan very long life, small noise, using high quality heating element under the same power efficiency can be doubled, and can effectively prolong the working life of the heating element and power saving.
The machine is equipped with safety protection function.
Celsius and Fahrenheit temperature conversion.
Calibration temperature function
If the heating element is replaced, the temperature must be recalibrated. This machine uses.
Use digital temperature calibration method to correct the incremental key input, easy and quick to adjust.
Applicable Usage :
Desoldering is suitable for a variety of components, such as: SOIC, CHIP, QFP, PLCC, BGA ( especially suitable for mobile phone line and row line of desoldering ); Used for heat shrinkable, drying, in addition to the paint, in addition to the glue, thawing, preheating, welding, etc.
Product Parameter
Model: 2020D
Category: LED microcomputer digital display
Power consumption: 700W
Airflow type: brushless fan soft wind
Gas flow rate: 100 litres/minute.
Handle component length: 120cm
Noise: less than 45 db
Package List :
1pcs x SUGON 2020D
1pcs x Power Cable
1pcs x Handle
2pcs x Cyclone nozzle (7mm,9mm)
3pcs x Straight nozzle (4mm,7mm,9mm)
1pcs x Manual
SUGON 8610DX 1000W Hot Air Rework Station LED Display Lead-Free Heat Gun Microcomputer Temperature Adjustable 5 nozzles. SUGON 8610DX 1000W Hot Air Rework Station Digital Display Intelligent Control Desoldering Solder Station for Phone Repair.
Product Features:
It has four working channels: CH1, CH2, CH3, CH4, and The air volume and temperature of each channel can be set and stored.
It has a variety of protection functions and perfect button functions.
Convenient real-time operation, with magnetic switch control, the handle is placed in the hand. The handle frame immediately goes to sleep.
With automatic sleep function, the parameters can be adjusted in the sleep state set up.
Sensor closed loop, microcomputer zero crossing trigger temperature control, high power. The temperature rises quickly, and the temperature adjustment is convenient and accurate and stable, and is not affected by the air output.
Using brushless vortex fan, the air flow is adjustable, the range is large, and it can be suitable should be used for multiple purposes.
The system is equipped with automatic large air volume cooling function to extend the life of the heating element,Protect the hot air handle.
Real-time temperature display function.
Has the function of self-calibration of temperature.
Package included:
1pcs x SUGON 8610DX
1pcs x Air gun stand
5pcs x Nozzle
1pcs x Grounding wire
1pcs x Manual
SUGON 858D Hot Air Gun Soldering Station 700W Temperature 500 Digital Display SMD Desoldering Station BGA Rework Station.
Product Introduce:
1. Essential basic soldering tool,fast heat up,easy to desoldering.
2. Skeleton winding Heating Element,higher heat generating efficiency,more stable longer use life.
3. Long service life brushess fan,safety&efficiency,auto start-stop technology
120L/min large volume.
4. F temperature display options,meet different country need
5. Temperature Calibration,when the display temp different from test temp,can use this function.
6. Not need large space 858D also can work perfect.
Product Data:
1. Input voltage: 110V,220V~240V.
2. Output Power: 700W.
3. Temperature range: 100~500 Celsius.
4. Temperature Stabillty: Good
5. Display mode: LED Display
6. Airflow type: Brushless-Motor Fan
QUICK 857DW+ lead free adjustable heat gun/hot air gun with helical wind soldering rework station, QUICK 857DW+ is an upgrade version of QUICK 857D SMD ESD soldering station, high efficiency heat dissipation to the heater soldering tip. Professional mobile cell phone repair tools: cheaper soldering iron and soldering station for proper mobile phone repairing.
QUICK 857DW+ Lead Free Rework Station SMD ESD Soldering Station (upgrade verson of 857DW)
Technical parameters :
Power Consumption: 580W
Air pump: DC motor, double turbine rotate out of the wind
Temperature control: 100 to 450 degrees
Gas flow rate: 100 litres/minute
Component length: 110cm
Size: 17 x 10.5 x 24 cm
Product Features :
Linear air volume adjustment, mains have change the air volume can be stable, double vortex spinning wind, the wind is soft, no impact.
Express of temperature, 3 seconds to reach the set temperature, temperature of liquid crystal display (LCD), intelligent sensor, automatic cooling, delay shutdown.
Welding with plastic components, ringer, such as the tail inserted inline deformation, welding circuit board no bubbles. Shield does not change color.
BGA chip is not easy to break.
Product Usage :
Suitable for a variety of components desoldering. Such as: SOIC, CHIP, QFP, PLCC, BGA, etc.
Used in thermal shrinkage, drying, in addition to the paint, in addition to stick, thawing, preheating, disinfection, plastic welding, etc.
Package List :
1pcs x Heat gun Quick 857DW
2pcs x Tweezers
Upgraded QUICK 2008D+ lead-free desoldering station 750W hot air gun for Mobile Phone LCD display motherboard BGA IC soldering repair. QUICK 2008 rework station 700W hot air gun for Mobile Phone LCD motherboard BGA IC soldering repair. Original QUICK 2008/QUICK 2008D+ LCD digital display hot air gun ESD soldering rework station for mobile phone BGA IC components desoldering and soldering repair.
Option:
1. QUICK 2008.
2. QUICK 2008D+.
Note: 110V, need Customized, time: about 3-5 days.
Specification:
1. QUICK 2008
Display Type: LCD
Power: 700W
Voltage: AC 110V/220V
Temperature Range: 100 500
Air volume ratio range: 1 ~ 120
Maximum airflow: 120 L / min
Airflow type: brushless fan soft wind
Display: LED digital (resolution 1 C)
hot air rework desoldering station is a professional phone repair rework station, desoldering and soldering of BGA IC components, 1000W 500 C QUICK 861DW lead free rework station for mobile phone BGA desoldering repair.
Hot Air Rework Station Lead Free Soldering Station For BGA IC Components Welding.
220V or 110V option voltage. Note: 110V, need customized, time: about 1-2 days.
With 3pcs Heat Gun Nozzles - size : 5mm 6mm 8mm, if need 3mm 12mm nozzle, need bought it alone. More QUICK 861DW Nozzles
Features :
With CH1, CH2, CH3 three working channels, and each channel can be set to the amount of wind, and temperature.
Password protection and key lock function.
Facilitate real-time operation, with magnetic switch control lever is placed in the handle holder immediately into hibernation.
With automatic sleep function, in a dormant state parameters can be set.
Sensor closed loop, microcomputer zero trigger temperature control, power, heating quickly, easily and precisely adjust the temperature stable, free from the influence of wind.
The use of brushless vortex blower, air flow adjustable, wide range, can be adapted to a variety of uses.
The system has an automatic cooling function of wind capacity, extend the life of the heating element and protect the hot air handle.
Specification :
Power: 1000W
Voltage: AC 220V 110V
Temperature range: 100 C 500 C
Air volume ratio range: 1 to 120
Maximum air flow: 120L min
Dimensions: 188 (L) 245 (D) 135 (H) mm
Package List :
1pcs x Quick 861DW rework station
1pcs x Hot air gun
1pcs x Hot air gun holder
3pcs x Heat gun nozzles
1pcs x Ground lead
1pcs x Instructions
hot air gun soldering station Intelligent digital display 1000W rework station For PCB chip repair. ATTEN St-862D 1000W Hot Air Gun Digital Display BGA Rework Station Automatic Sleep Mobile Phone Repair Desoldering Station.
Features:
1. Input Voltage : 220V.
2. Power: 1000
3. Temperature Range: 100 480
4. Maximum Air Flow:120L/min.
SUGON 8620DX 1300W Hot Air Rework Station Microcomputer Temperature Control BGA Rework Station Curved nozzle Welding Repair.
Note:
1.The entire machine parts have been upgraded, and the air volume control has been increased by 80%. Current air volume speed adjustment 1-200.
2. Temperature range:100 500 (212 932).
3. 45-degree nozzles needs to be purchased separately.
Features:
1.It has four working channels: CH1, CH2, CH3, CH4, and The air volume and temperature of each channel can be set and stored.
2. It has a variety of protection functions and perfect button functions.
3.Convenient real-time operation, with magnetic switch control, the handle is placed in the hand The handle frame immediately goes to sleep.
4.With automatic sleep function, the parameters can be adjusted in the sleep state Set up.
5.Sensor closed loop, microcomputer zero crossing trigger temperature control, high power,The temperature rises quickly, and the temperature adjustment is convenient and accurate and stable, and is not affected by the air output.
6.Using brushless vortex fan, the air flow is adjustable, the range is large, and it can be suitable Should be used for multiple purposes.
7.The system is equipped with automatic large air volume cooling function to extend the life of the heating element, Protect the hot air handle.
8. Real-time temperature display function.
9. Has the function of self-calibration of temperature.
Use:
1. Suitable for disassembly and soldering of a variety of components, such as: SOIC, CHIP, QFP,PLCC, BGA, etc.
2. Suitable for heat shrinkage, drying, paint removal, debonding, thawing, preheating, disinfection,Glue welding, etc.
3. The air volume is adjustable, suitable for fields that require small air volume and large air volume heating together.
4. Suitable for lead-free hot air desoldering occasions.
Quick operation:
Temperature unit conversion
During use, press the multi-function button to use the warm
Degree Buzzer settingsDuring use, press and hold the multi-function button for two seconds to turn off Turn off or turn on the buzzer sound.
Temperature calibration settings When the host is off, press and hold the Multi-function button for two seconds, then press Turn on the power switch to enter the temperature calibration setting status interface, press the air volume key to set the correction temperature, after setting, click more Function key exits the temperature calibration function and enters the working state.
Quick TR1300A hot air soldering station is an professional intelligent soldering rework station for mobile phone motherboard repair, 1300W Quick TR1300A intelligent hot air soldering station with touch control temperature alarm password lock function multipoint temperature digital calibration for phone PCB soldering repair.
QUICK TR1300A Intelligent Hot Air Station Mobile Phone Soldering Repair. Come with 3pcs: Heat Gun Nozzles 5mm 6mm 8mm, if need 3mm 12mm Nozzle, need bought it alone. More QUICK 861DW TR1300A Nozzles from: VC979.
General Specification:
Power: 1300W
Voltage: 110V 220V for choose
Temperature range: 100 C~500 C 212 F-932 F
Temperature stability: 2 C
Air volume: 6 70L / Min
Airflow: 1 100m3/h
Description :
Host and duct design separately
Ultra-high power 1300W
You can preset the process parameters of the three channels
With temperature alarm function
The use of brushless vortex fan, air flow adjustable, a large range
Can be on the temperature, air volume, time and other parameters set
Mulit-point temperature digital calibration, temperature locked by password.
Parameters of three channels pre-set memory.
Temperature alarm function, C and F interchangeable.
Twin-stag brishless blower pump for stable airflow, long life.
Temperature, airflow, working time and other parameters can be set.
Slient design of the rework station, with noise lower than 55dB.
Plug-in design of ceramic heating element for stable temperature, long life and easy maintenance.
ESD design, ESD testing function.
Can be controlled via PC
QUICK TR1300A 1300W Intelligent Hot Air Soldering Station
Features :
Multipoint temperature digital calibration,Password lock function.
Can preset technological parameter of three gallery, more practical.
Temperature alarm function, temperature changer.
Adopt two-stage supercharging brushless pump, air pressure stability, long life.
Set the parameters such as temperature, air velocity and time.
Ceramic heating element, plug type design.
De-soldering of the SMD components, such as SOIC, CHIP, QFP, PLCC, BGA and so on.
Suitable to hot shrink, drying, remove lacquer and viscosity, thaw, preheating, disinfect and so on.
Suitable to the situation with different grade airflow.
Suitable to the hot air lead free de-soldering.
